GIF89a;
Direktori : /usr/src/kernels/3.10.0-957.21.3.el7.centos.plus.x86_64/include/scsi/ |
Current File : //usr/src/kernels/3.10.0-957.21.3.el7.centos.plus.x86_64/include/scsi/libsas.h |
/* * SAS host prototypes and structures header file * * Copyright (C) 2005 Adaptec, Inc. All rights reserved. * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> * * This file is licensed under GPLv2. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * USA * */ #ifndef _LIBSAS_H_ #define _LIBSAS_H_ #include <linux/timer.h> #include <linux/pci.h> #include <scsi/sas.h> #include <linux/libata.h> #include <linux/list.h> #include <scsi/scsi_device.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_transport_sas.h> #include <linux/scatterlist.h> #include <linux/slab.h> struct block_device; enum sas_class { SAS, EXPANDER }; enum sas_phy_role { PHY_ROLE_NONE = 0, PHY_ROLE_TARGET = 0x40, PHY_ROLE_INITIATOR = 0x80, }; enum sas_phy_type { PHY_TYPE_PHYSICAL, PHY_TYPE_VIRTUAL }; /* The events are mnemonically described in sas_dump.c * so when updating/adding events here, please also * update the other file too. */ enum ha_event { HAE_RESET = 0U, HA_NUM_EVENTS = 1, }; enum port_event { PORTE_BYTES_DMAED = 0U, PORTE_BROADCAST_RCVD = 1, PORTE_LINK_RESET_ERR = 2, PORTE_TIMER_EVENT = 3, PORTE_HARD_RESET = 4, PORT_NUM_EVENTS = 5, }; enum phy_event { PHYE_LOSS_OF_SIGNAL = 0U, PHYE_OOB_DONE = 1, PHYE_OOB_ERROR = 2, PHYE_SPINUP_HOLD = 3, /* hot plug SATA, no COMWAKE sent */ PHYE_RESUME_TIMEOUT = 4, PHY_NUM_EVENTS = 5, }; enum discover_event { DISCE_DISCOVER_DOMAIN = 0U, DISCE_REVALIDATE_DOMAIN = 1, DISCE_PORT_GONE = 2, DISCE_SUSPEND = 4, DISCE_RESUME = 5, DISC_NUM_EVENTS = 7, }; /* ---------- Expander Devices ---------- */ #define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj) #define to_dev_attr(_attr) container_of(_attr, struct domain_dev_attribute,\ attr) enum routing_attribute { DIRECT_ROUTING, SUBTRACTIVE_ROUTING, TABLE_ROUTING, }; enum ex_phy_state { PHY_EMPTY, PHY_VACANT, PHY_NOT_PRESENT, PHY_DEVICE_DISCOVERED }; struct ex_phy { int phy_id; enum ex_phy_state phy_state; enum sas_device_type attached_dev_type; enum sas_linkrate linkrate; u8 attached_sata_host:1; u8 attached_sata_dev:1; u8 attached_sata_ps:1; enum sas_protocol attached_tproto; enum sas_protocol attached_iproto; u8 attached_sas_addr[SAS_ADDR_SIZE]; u8 attached_phy_id; int phy_change_count; enum routing_attribute routing_attr; u8 virtual:1; int last_da_index; struct sas_phy *phy; struct sas_port *port; }; struct expander_device { struct list_head children; int ex_change_count; u16 max_route_indexes; u8 num_phys; u8 t2t_supp:1; u8 configuring:1; u8 conf_route_table:1; u8 enclosure_logical_id[8]; struct ex_phy *ex_phy; struct sas_port *parent_port; struct mutex cmd_mutex; }; /* ---------- SATA device ---------- */ #define ATA_RESP_FIS_SIZE 24 struct sata_device { unsigned int class; struct smp_resp rps_resp; /* report_phy_sata_resp */ u8 port_no; /* port number, if this is a PM (Port) */ struct ata_port *ap; struct ata_host ata_host; u8 fis[ATA_RESP_FIS_SIZE]; }; struct ssp_device { struct list_head eh_list_node; /* pending a user requested eh action */ struct scsi_lun reset_lun; }; enum { SAS_DEV_GONE, SAS_DEV_FOUND, /* device notified to lldd */ SAS_DEV_DESTROY, SAS_DEV_EH_PENDING, SAS_DEV_LU_RESET, SAS_DEV_RESET, }; struct domain_device { spinlock_t done_lock; enum sas_device_type dev_type; enum sas_linkrate linkrate; enum sas_linkrate min_linkrate; enum sas_linkrate max_linkrate; int pathways; struct domain_device *parent; struct list_head siblings; /* devices on the same level */ struct asd_sas_port *port; /* shortcut to root of the tree */ struct sas_phy *phy; struct list_head dev_list_node; struct list_head disco_list_node; /* awaiting probe or destruct */ enum sas_protocol iproto; enum sas_protocol tproto; struct sas_rphy *rphy; u8 sas_addr[SAS_ADDR_SIZE]; u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE]; u8 frame_rcvd[32]; union { struct expander_device ex_dev; struct sata_device sata_dev; /* STP & directly attached */ struct ssp_device ssp_dev; }; void *lldd_dev; unsigned long state; struct kref kref; }; struct sas_work { struct list_head drain_node; struct work_struct work; }; static inline void INIT_SAS_WORK(struct sas_work *sw, void (*fn)(struct work_struct *)) { INIT_WORK(&sw->work, fn); INIT_LIST_HEAD(&sw->drain_node); } struct sas_discovery_event { struct sas_work work; struct asd_sas_port *port; }; static inline struct sas_discovery_event *to_sas_discovery_event(struct work_struct *work) { struct sas_discovery_event *ev = container_of(work, typeof(*ev), work.work); return ev; } struct sas_discovery { struct sas_discovery_event disc_work[DISC_NUM_EVENTS]; unsigned long pending; u8 fanout_sas_addr[8]; u8 eeds_a[8]; u8 eeds_b[8]; int max_level; }; /* The port struct is Class:RW, driver:RO */ struct asd_sas_port { /* private: */ struct completion port_gone_completion; struct sas_discovery disc; struct domain_device *port_dev; spinlock_t dev_list_lock; struct list_head dev_list; struct list_head disco_list; struct list_head destroy_list; struct list_head sas_port_del_list; enum sas_linkrate linkrate; struct sas_work work; int suspended; /* public: */ int id; enum sas_class class; u8 sas_addr[SAS_ADDR_SIZE]; u8 attached_sas_addr[SAS_ADDR_SIZE]; enum sas_protocol iproto; enum sas_protocol tproto; enum sas_oob_mode oob_mode; spinlock_t phy_list_lock; struct list_head phy_list; int num_phys; u32 phy_mask; struct sas_ha_struct *ha; struct sas_port *port; void *lldd_port; /* not touched by the sas class code */ }; struct asd_sas_event { struct sas_work work; struct asd_sas_phy *phy; }; static inline struct asd_sas_event *to_asd_sas_event(struct work_struct *work) { struct asd_sas_event *ev = container_of(work, typeof(*ev), work.work); return ev; } /* The phy pretty much is controlled by the LLDD. * The class only reads those fields. */ struct asd_sas_phy { /* private: */ struct asd_sas_event port_events[PORT_NUM_EVENTS]; struct asd_sas_event phy_events[PHY_NUM_EVENTS]; unsigned long port_events_pending; unsigned long phy_events_pending; int error; int suspended; struct sas_phy *phy; /* public: */ /* The following are class:RO, driver:R/W */ int enabled; /* must be set */ int id; /* must be set */ enum sas_class class; enum sas_protocol iproto; enum sas_protocol tproto; enum sas_phy_type type; enum sas_phy_role role; enum sas_oob_mode oob_mode; enum sas_linkrate linkrate; u8 *sas_addr; /* must be set */ u8 attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */ spinlock_t frame_rcvd_lock; u8 *frame_rcvd; /* must be set */ int frame_rcvd_size; spinlock_t sas_prim_lock; u32 sas_prim; struct list_head port_phy_el; /* driver:RO */ struct asd_sas_port *port; /* Class:RW, driver: RO */ struct sas_ha_struct *ha; /* may be set; the class sets it anyway */ void *lldd_phy; /* not touched by the sas_class_code */ }; struct scsi_core { struct Scsi_Host *shost; }; struct sas_ha_event { struct sas_work work; struct sas_ha_struct *ha; }; static inline struct sas_ha_event *to_sas_ha_event(struct work_struct *work) { struct sas_ha_event *ev = container_of(work, typeof(*ev), work.work); return ev; } enum sas_ha_state { SAS_HA_REGISTERED, SAS_HA_DRAINING, SAS_HA_ATA_EH_ACTIVE, SAS_HA_FROZEN, }; struct sas_ha_struct { /* private: */ struct sas_ha_event ha_events[HA_NUM_EVENTS]; unsigned long pending; struct list_head defer_q; /* work queued while draining */ struct mutex drain_mutex; unsigned long state; spinlock_t lock; int eh_active; wait_queue_head_t eh_wait_q; struct list_head eh_dev_q; struct mutex disco_mutex; struct scsi_core core; /* public: */ char *sas_ha_name; struct device *dev; /* should be set */ struct module *lldd_module; /* should be set */ u8 *sas_addr; /* must be set */ u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE]; spinlock_t phy_port_lock; struct asd_sas_phy **sas_phy; /* array of valid pointers, must be set */ struct asd_sas_port **sas_port; /* array of valid pointers, must be set */ int num_phys; /* must be set, gt 0, static */ int strict_wide_ports; /* both sas_addr and attached_sas_addr must match * their siblings when forming wide ports */ /* LLDD calls these to notify the class of an event. */ void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event); void (*notify_port_event)(struct asd_sas_phy *, enum port_event); void (*notify_phy_event)(struct asd_sas_phy *, enum phy_event); void *lldd_ha; /* not touched by sas class code */ struct list_head eh_done_q; /* complete via scsi_eh_flush_done_q */ struct list_head eh_ata_q; /* scmds to promote from sas to ata eh */ }; #define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata) static inline struct domain_device * starget_to_domain_dev(struct scsi_target *starget) { return starget->hostdata; } static inline struct domain_device * sdev_to_domain_dev(struct scsi_device *sdev) { return starget_to_domain_dev(sdev->sdev_target); } static inline struct ata_device *sas_to_ata_dev(struct domain_device *dev) { return &dev->sata_dev.ap->link.device[0]; } static inline struct domain_device * cmd_to_domain_dev(struct scsi_cmnd *cmd) { return sdev_to_domain_dev(cmd->device); } void sas_hash_addr(u8 *hashed, const u8 *sas_addr); /* Before calling a notify event, LLDD should use this function * when the link is severed (possibly from its tasklet). * The idea is that the Class only reads those, while the LLDD, * can R/W these (thus avoiding a race). */ static inline void sas_phy_disconnected(struct asd_sas_phy *phy) { phy->oob_mode = OOB_NOT_CONNECTED; phy->linkrate = SAS_LINK_RATE_UNKNOWN; } static inline unsigned int to_sas_gpio_od(int device, int bit) { return 3 * device + bit; } static inline void sas_put_local_phy(struct sas_phy *phy) { put_device(&phy->dev); } #ifdef CONFIG_SCSI_SAS_HOST_SMP int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count); #else static inline int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count) { return -1; } #endif /* ---------- Tasks ---------- */ /* service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED | exec_status | | | ---------------------+---------------------+-----------------------+ SAM_... | X | | DEV_NO_RESPONSE | X | X | INTERRUPTED | X | | QUEUE_FULL | | X | DEVICE_UNKNOWN | | X | SG_ERR | | X | ---------------------+---------------------+-----------------------+ */ enum service_response { SAS_TASK_COMPLETE, SAS_TASK_UNDELIVERED = -1, }; enum exec_status { /* The SAM_STAT_.. codes fit in the lower 6 bits, alias some of * them here to silence 'case value not in enumerated type' warnings */ __SAM_STAT_CHECK_CONDITION = SAM_STAT_CHECK_CONDITION, SAS_DEV_NO_RESPONSE = 0x80, SAS_DATA_UNDERRUN, SAS_DATA_OVERRUN, SAS_INTERRUPTED, SAS_QUEUE_FULL, SAS_DEVICE_UNKNOWN, SAS_SG_ERR, SAS_OPEN_REJECT, SAS_OPEN_TO, SAS_PROTO_RESPONSE, SAS_PHY_DOWN, SAS_NAK_R_ERR, SAS_PENDING, SAS_ABORTED_TASK, }; /* When a task finishes with a response, the LLDD examines the * response: * - For an ATA task task_status_struct::stat is set to * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the * contents of struct ata_task_resp. * - For SSP tasks, if no data is present or status/TMF response * is valid, task_status_struct::stat is set. If data is present * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets * task_status_struct::buf_valid_size, and task_status_struct::stat is * set to SAM_CHECK_COND. * * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp * for ATA task. * * "frame_len" is the total frame length, which could be more or less * than actually copied. * * Tasks ending with response, always set the residual field. */ struct ata_task_resp { u16 frame_len; u8 ending_fis[ATA_RESP_FIS_SIZE]; /* dev to host or data-in */ }; #define SAS_STATUS_BUF_SIZE 96 struct task_status_struct { enum service_response resp; enum exec_status stat; int buf_valid_size; u8 buf[SAS_STATUS_BUF_SIZE]; u32 residual; enum sas_open_rej_reason open_rej_reason; }; /* ATA and ATAPI task queuable to a SAS LLDD. */ struct sas_ata_task { struct host_to_dev_fis fis; u8 atapi_packet[16]; /* 0 if not ATAPI task */ u8 retry_count; /* hardware retry, should be > 0 */ u8 dma_xfer:1; /* PIO:0 or DMA:1 */ u8 use_ncq:1; u8 set_affil_pol:1; u8 stp_affil_pol:1; u8 device_control_reg_update:1; }; struct sas_smp_task { struct scatterlist smp_req; struct scatterlist smp_resp; }; enum task_attribute { TASK_ATTR_SIMPLE = 0, TASK_ATTR_HOQ = 1, TASK_ATTR_ORDERED= 2, TASK_ATTR_ACA = 4, }; struct sas_ssp_task { u8 retry_count; /* hardware retry, should be > 0 */ u8 LUN[8]; u8 enable_first_burst:1; enum task_attribute task_attr; u8 task_prio; u8 cdb[16]; }; struct sas_task { struct domain_device *dev; spinlock_t task_state_lock; unsigned task_state_flags; enum sas_protocol task_proto; union { struct sas_ata_task ata_task; struct sas_smp_task smp_task; struct sas_ssp_task ssp_task; }; struct scatterlist *scatter; int num_scatter; u32 total_xfer_len; u8 data_dir:2; /* Use PCI_DMA_... */ struct task_status_struct task_status; void (*task_done)(struct sas_task *); void *lldd_task; /* for use by LLDDs */ void *uldd_task; struct sas_task_slow *slow_task; }; struct sas_task_slow { /* standard/extra infrastructure for slow path commands (SMP and * internal lldd commands */ struct timer_list timer; struct completion completion; }; #define SAS_TASK_STATE_PENDING 1 #define SAS_TASK_STATE_DONE 2 #define SAS_TASK_STATE_ABORTED 4 #define SAS_TASK_NEED_DEV_RESET 8 #define SAS_TASK_AT_INITIATOR 16 extern struct sas_task *sas_alloc_task(gfp_t flags); extern struct sas_task *sas_alloc_slow_task(gfp_t flags); extern void sas_free_task(struct sas_task *task); struct sas_domain_function_template { /* The class calls these to notify the LLDD of an event. */ void (*lldd_port_formed)(struct asd_sas_phy *); void (*lldd_port_deformed)(struct asd_sas_phy *); /* The class calls these when a device is found or gone. */ int (*lldd_dev_found)(struct domain_device *); void (*lldd_dev_gone)(struct domain_device *); int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags); /* Task Management Functions. Must be called from process context. */ int (*lldd_abort_task)(struct sas_task *); int (*lldd_abort_task_set)(struct domain_device *, u8 *lun); int (*lldd_clear_aca)(struct domain_device *, u8 *lun); int (*lldd_clear_task_set)(struct domain_device *, u8 *lun); int (*lldd_I_T_nexus_reset)(struct domain_device *); int (*lldd_ata_check_ready)(struct domain_device *); void (*lldd_ata_set_dmamode)(struct domain_device *); int (*lldd_lu_reset)(struct domain_device *, u8 *lun); int (*lldd_query_task)(struct sas_task *); /* Port and Adapter management */ int (*lldd_clear_nexus_port)(struct asd_sas_port *); int (*lldd_clear_nexus_ha)(struct sas_ha_struct *); /* Phy management */ int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *); /* GPIO support */ int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type, u8 reg_index, u8 reg_count, u8 *write_data); }; extern int sas_register_ha(struct sas_ha_struct *); extern int sas_unregister_ha(struct sas_ha_struct *); extern void sas_prep_resume_ha(struct sas_ha_struct *sas_ha); extern void sas_resume_ha(struct sas_ha_struct *sas_ha); extern void sas_suspend_ha(struct sas_ha_struct *sas_ha); int sas_set_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates); int sas_phy_reset(struct sas_phy *phy, int hard_reset); extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *); extern int sas_target_alloc(struct scsi_target *); extern int sas_slave_configure(struct scsi_device *); extern int sas_change_queue_depth(struct scsi_device *, int new_depth, int reason); extern int sas_change_queue_type(struct scsi_device *, int qt); extern int sas_bios_param(struct scsi_device *, struct block_device *, sector_t capacity, int *hsc); extern struct scsi_transport_template * sas_domain_attach_transport(struct sas_domain_function_template *); extern void sas_domain_release_transport(struct scsi_transport_template *); int sas_discover_root_expander(struct domain_device *); void sas_init_ex_attr(void); int sas_ex_revalidate_domain(struct domain_device *); void sas_unregister_domain_devices(struct asd_sas_port *port, int gone); void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *); int sas_discover_event(struct asd_sas_port *, enum discover_event ev); int sas_discover_sata(struct domain_device *); int sas_discover_end_dev(struct domain_device *); void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *); void sas_init_dev(struct domain_device *); void sas_task_abort(struct sas_task *); int sas_eh_abort_handler(struct scsi_cmnd *cmd); int sas_eh_device_reset_handler(struct scsi_cmnd *cmd); int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd); extern void sas_target_destroy(struct scsi_target *); extern int sas_slave_alloc(struct scsi_device *); extern int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg); extern int sas_drain_work(struct sas_ha_struct *ha); extern int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, struct request *req); extern void sas_ssp_task_response(struct device *dev, struct sas_task *task, struct ssp_response_iu *iu); struct sas_phy *sas_get_local_phy(struct domain_device *dev); int sas_request_addr(struct Scsi_Host *shost, u8 *addr); #endif /* _SASLIB_H_ */