Current File : //usr/src/kernels/3.10.0-1160.81.1.el7.centos.plus.x86_64/include/linux/swait.h
#ifndef _LINUX_SWAIT_H
#define _LINUX_SWAIT_H
#include <linux/list.h>
#include <linux/stddef.h>
#include <linux/spinlock.h>
#include <asm/current.h>
/*
* Simple wait queues
*
* While these are very similar to the other/complex wait queues (wait.h) the
* most important difference is that the simple waitqueue allows for
* deterministic behaviour -- IOW it has strictly bounded IRQ and lock hold
* times.
*
* In order to make this so, we had to drop a fair number of features of the
* other waitqueue code; notably:
*
* - mixing INTERRUPTIBLE and UNINTERRUPTIBLE sleeps on the same waitqueue;
* all wakeups are TASK_NORMAL in order to avoid O(n) lookups for the right
* sleeper state.
*
* - the exclusive mode; because this requires preserving the list order
* and this is hard.
*
* - custom wake functions; because you cannot give any guarantees about
* random code.
*
* As a side effect of this; the data structures are slimmer.
*
* One would recommend using this wait queue where possible.
*/
struct task_struct;
struct swait_queue_head {
raw_spinlock_t lock;
struct list_head task_list;
};
struct swait_queue {
struct task_struct *task;
struct list_head task_list;
};
#define __SWAITQUEUE_INITIALIZER(name) { \
.task = current, \
.task_list = LIST_HEAD_INIT((name).task_list), \
}
#define DECLARE_SWAITQUEUE(name) \
struct swait_queue name = __SWAITQUEUE_INITIALIZER(name)
#define __SWAIT_QUEUE_HEAD_INITIALIZER(name) { \
.lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock), \
.task_list = LIST_HEAD_INIT((name).task_list), \
}
#define DECLARE_SWAIT_QUEUE_HEAD(name) \
struct swait_queue_head name = __SWAIT_QUEUE_HEAD_INITIALIZER(name)
extern void __init_swait_queue_head(struct swait_queue_head *q, const char *name,
struct lock_class_key *key);
#define init_swait_queue_head(q) \
do { \
static struct lock_class_key __key; \
__init_swait_queue_head((q), #q, &__key); \
} while (0)
#ifdef CONFIG_LOCKDEP
# define __SWAIT_QUEUE_HEAD_INIT_ONSTACK(name) \
({ init_swait_queue_head(&name); name; })
# define DECLARE_SWAIT_QUEUE_HEAD_ONSTACK(name) \
struct swait_queue_head name = __SWAIT_QUEUE_HEAD_INIT_ONSTACK(name)
#else
# define DECLARE_SWAIT_QUEUE_HEAD_ONSTACK(name) \
DECLARE_SWAIT_QUEUE_HEAD(name)
#endif
/**
* swait_active -- locklessly test for waiters on the queue
* @wq: the waitqueue to test for waiters
*
* returns true if the wait list is not empty
*
* NOTE: this function is lockless and requires care, incorrect usage _will_
* lead to sporadic and non-obvious failure.
*
* NOTE2: this function has the same above implications as regular waitqueues.
*
* Use either while holding swait_queue_head::lock or when used for wakeups
* with an extra smp_mb() like:
*
* CPU0 - waker CPU1 - waiter
*
* for (;;) {
* @cond = true; prepare_to_swait(&wq_head, &wait, state);
* smp_mb(); // smp_mb() from set_current_state()
* if (swait_active(wq_head)) if (@cond)
* wake_up(wq_head); break;
* schedule();
* }
* finish_swait(&wq_head, &wait);
*
* Because without the explicit smp_mb() it's possible for the
* swait_active() load to get hoisted over the @cond store such that we'll
* observe an empty wait list while the waiter might not observe @cond.
* This, in turn, can trigger missing wakeups.
*
* Also note that this 'optimization' trades a spin_lock() for an smp_mb(),
* which (when the lock is uncontended) are of roughly equal cost.
*/
static inline int swait_active(struct swait_queue_head *wq)
{
return !list_empty(&wq->task_list);
}
/**
* swq_has_sleeper - check if there are any waiting processes
* @wq: the waitqueue to test for waiters
*
* Returns true if @wq has waiting processes
*
* Please refer to the comment for swait_active.
*/
static inline bool swq_has_sleeper(struct swait_queue_head *wq)
{
/*
* We need to be sure we are in sync with the list_add()
* modifications to the wait queue (task_list).
*
* This memory barrier should be paired with one on the
* waiting side.
*/
smp_mb();
return swait_active(wq);
}
extern void swake_up(struct swait_queue_head *q);
extern void swake_up_all(struct swait_queue_head *q);
extern void swake_up_locked(struct swait_queue_head *q);
extern void __prepare_to_swait(struct swait_queue_head *q, struct swait_queue *wait);
extern void prepare_to_swait(struct swait_queue_head *q, struct swait_queue *wait, int state);
extern long prepare_to_swait_event(struct swait_queue_head *q, struct swait_queue *wait, int state);
extern void __finish_swait(struct swait_queue_head *q, struct swait_queue *wait);
extern void finish_swait(struct swait_queue_head *q, struct swait_queue *wait);
/* as per ___wait_event() but for swait, therefore "exclusive == 0" */
#define ___swait_event(wq, condition, state, ret, cmd) \
({ \
struct swait_queue __wait; \
long __ret = ret; \
\
INIT_LIST_HEAD(&__wait.task_list); \
for (;;) { \
long __int = prepare_to_swait_event(&wq, &__wait, state);\
\
if (condition) \
break; \
\
if (___wait_is_interruptible(state) && __int) { \
__ret = __int; \
break; \
} \
\
cmd; \
} \
finish_swait(&wq, &__wait); \
__ret; \
})
#define __swait_event(wq, condition) \
(void)___swait_event(wq, condition, TASK_UNINTERRUPTIBLE, 0, \
schedule())
#define swait_event(wq, condition) \
do { \
if (condition) \
break; \
__swait_event(wq, condition); \
} while (0)
#define __swait_event_timeout(wq, condition, timeout) \
___swait_event(wq, ___wait_cond_timeout(condition), \
TASK_UNINTERRUPTIBLE, timeout, \
__ret = schedule_timeout(__ret))
#define swait_event_timeout(wq, condition, timeout) \
({ \
long __ret = timeout; \
if (!___wait_cond_timeout(condition)) \
__ret = __swait_event_timeout(wq, condition, timeout); \
__ret; \
})
#define __swait_event_interruptible(wq, condition) \
___swait_event(wq, condition, TASK_INTERRUPTIBLE, 0, \
schedule())
#define swait_event_interruptible(wq, condition) \
({ \
int __ret = 0; \
if (!(condition)) \
__ret = __swait_event_interruptible(wq, condition); \
__ret; \
})
#define __swait_event_interruptible_timeout(wq, condition, timeout) \
___swait_event(wq, ___wait_cond_timeout(condition), \
TASK_INTERRUPTIBLE, timeout, \
__ret = schedule_timeout(__ret))
#define swait_event_interruptible_timeout(wq, condition, timeout) \
({ \
long __ret = timeout; \
if (!___wait_cond_timeout(condition)) \
__ret = __swait_event_interruptible_timeout(wq, \
condition, timeout); \
__ret; \
})
#endif /* _LINUX_SWAIT_H */
Mini Shell