Current File : //usr/src/kernels/3.10.0-1160.80.1.el7.centos.plus.x86_64/include/linux/ftrace.h
/*
* Ftrace header. For implementation details beyond the random comments
* scattered below, see: Documentation/trace/ftrace-design.txt
*/
#ifndef _LINUX_FTRACE_H
#define _LINUX_FTRACE_H
#include <linux/trace_clock.h>
#include <linux/kallsyms.h>
#include <linux/linkage.h>
#include <linux/bitops.h>
#include <linux/ptrace.h>
#include <linux/ktime.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <asm/ftrace.h>
/*
* If the arch supports passing the variable contents of
* function_trace_op as the third parameter back from the
* mcount call, then the arch should define this as 1.
*/
#ifndef ARCH_SUPPORTS_FTRACE_OPS
#define ARCH_SUPPORTS_FTRACE_OPS 0
#endif
/*
* If the arch's mcount caller does not support all of ftrace's
* features, then it must call an indirect function that
* does. Or at least does enough to prevent any unwelcomed side effects.
*/
#if !ARCH_SUPPORTS_FTRACE_OPS
# define FTRACE_FORCE_LIST_FUNC 1
#else
# define FTRACE_FORCE_LIST_FUNC 0
#endif
struct module;
struct ftrace_hash;
#ifdef CONFIG_FUNCTION_TRACER
extern int ftrace_enabled;
extern int
ftrace_enable_sysctl(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
loff_t *ppos);
struct ftrace_ops;
typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *op, struct pt_regs *regs);
/*
* FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are
* set in the flags member.
* CONTROL, SAVE_REGS, SAVE_REGS_IF_SUPPORTED, RECURSION_SAFE, STUB and
* IPMODIFY are a kind of attribute flags which can be set only before
* registering the ftrace_ops, and can not be modified while registered.
* Changing those attribute flags after registering ftrace_ops will
* cause unexpected results.
*
* ENABLED - set/unset when ftrace_ops is registered/unregistered
* GLOBAL - set manualy by ftrace_ops user to denote the ftrace_ops
* is part of the global tracers sharing the same filter
* via set_ftrace_* debugfs files.
* DYNAMIC - set when ftrace_ops is registered to denote dynamically
* allocated ftrace_ops which need special care
* CONTROL - set manualy by ftrace_ops user to denote the ftrace_ops
* could be controled by following calls:
* ftrace_function_local_enable
* ftrace_function_local_disable
* SAVE_REGS - The ftrace_ops wants regs saved at each function called
* and passed to the callback. If this flag is set, but the
* architecture does not support passing regs
* (CONFIG_DYNAMIC_FTRACE_WITH_REGS is not defined), then the
* ftrace_ops will fail to register, unless the next flag
* is set.
* SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the
* handler can handle an arch that does not save regs
* (the handler tests if regs == NULL), then it can set
* this flag instead. It will not fail registering the ftrace_ops
* but, the regs field will be NULL if the arch does not support
* passing regs to the handler.
* Note, if this flag is set, the SAVE_REGS flag will automatically
* get set upon registering the ftrace_ops, if the arch supports it.
* RECURSION_SAFE - The ftrace_ops can set this to tell the ftrace infrastructure
* that the call back has its own recursion protection. If it does
* not set this, then the ftrace infrastructure will add recursion
* protection for the caller.
* STUB - The ftrace_ops is just a place holder.
* INITIALIZED - The ftrace_ops has already been initialized (first use time
* register_ftrace_function() is called, it will initialized the ops)
* IPMODIFY - The ops can modify the IP register. This can only be set with
* SAVE_REGS. If another ops with this flag set is already registered
* for any of the functions that this ops will be registered for, then
* this ops will fail to register or set_filter_ip.
* PERMANENT - Set when the ops is permanent and should not be affected by
* ftrace_enabled.
*/
enum {
FTRACE_OPS_FL_ENABLED = 1 << 0,
FTRACE_OPS_FL_GLOBAL = 1 << 1,
FTRACE_OPS_FL_DYNAMIC = 1 << 2,
FTRACE_OPS_FL_CONTROL = 1 << 3,
FTRACE_OPS_FL_SAVE_REGS = 1 << 4,
FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED = 1 << 5,
FTRACE_OPS_FL_RECURSION_SAFE = 1 << 6,
FTRACE_OPS_FL_STUB = 1 << 7,
FTRACE_OPS_FL_INITIALIZED = 1 << 8,
FTRACE_OPS_FL_IPMODIFY = 1 << 9,
FTRACE_OPS_FL_PERMANENT = 1 << 10,
};
struct ftrace_ops {
ftrace_func_t func;
struct ftrace_ops *next;
unsigned long flags;
int __percpu *disabled;
#ifdef CONFIG_DYNAMIC_FTRACE
struct ftrace_hash *notrace_hash;
struct ftrace_hash *filter_hash;
struct mutex regex_lock;
#endif
};
/*
* Type of the current tracing.
*/
enum ftrace_tracing_type_t {
FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
FTRACE_TYPE_RETURN, /* Hook the return of the function */
};
/* Current tracing type, default is FTRACE_TYPE_ENTER */
extern enum ftrace_tracing_type_t ftrace_tracing_type;
/*
* The ftrace_ops must be a static and should also
* be read_mostly. These functions do modify read_mostly variables
* so use them sparely. Never free an ftrace_op or modify the
* next pointer after it has been registered. Even after unregistering
* it, the next pointer may still be used internally.
*/
int register_ftrace_function(struct ftrace_ops *ops);
int unregister_ftrace_function(struct ftrace_ops *ops);
void clear_ftrace_function(void);
/**
* ftrace_function_local_enable - enable controlled ftrace_ops on current cpu
*
* This function enables tracing on current cpu by decreasing
* the per cpu control variable.
* It must be called with preemption disabled and only on ftrace_ops
* registered with FTRACE_OPS_FL_CONTROL. If called without preemption
* disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
*/
static inline void ftrace_function_local_enable(struct ftrace_ops *ops)
{
if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
return;
(*this_cpu_ptr(ops->disabled))--;
}
/**
* ftrace_function_local_disable - enable controlled ftrace_ops on current cpu
*
* This function enables tracing on current cpu by decreasing
* the per cpu control variable.
* It must be called with preemption disabled and only on ftrace_ops
* registered with FTRACE_OPS_FL_CONTROL. If called without preemption
* disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
*/
static inline void ftrace_function_local_disable(struct ftrace_ops *ops)
{
if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
return;
(*this_cpu_ptr(ops->disabled))++;
}
/**
* ftrace_function_local_disabled - returns ftrace_ops disabled value
* on current cpu
*
* This function returns value of ftrace_ops::disabled on current cpu.
* It must be called with preemption disabled and only on ftrace_ops
* registered with FTRACE_OPS_FL_CONTROL. If called without preemption
* disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
*/
static inline int ftrace_function_local_disabled(struct ftrace_ops *ops)
{
WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL));
return *this_cpu_ptr(ops->disabled);
}
extern void ftrace_stub(unsigned long a0, unsigned long a1,
struct ftrace_ops *op, struct pt_regs *regs);
#else /* !CONFIG_FUNCTION_TRACER */
/*
* (un)register_ftrace_function must be a macro since the ops parameter
* must not be evaluated.
*/
#define register_ftrace_function(ops) ({ 0; })
#define unregister_ftrace_function(ops) ({ 0; })
static inline int ftrace_nr_registered_ops(void)
{
return 0;
}
static inline void clear_ftrace_function(void) { }
static inline void ftrace_kill(void) { }
#endif /* CONFIG_FUNCTION_TRACER */
#ifdef CONFIG_STACK_TRACER
extern int stack_tracer_enabled;
int
stack_trace_sysctl(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
loff_t *ppos);
#endif
struct ftrace_func_command {
struct list_head list;
char *name;
int (*func)(struct ftrace_hash *hash,
char *func, char *cmd,
char *params, int enable);
};
#ifdef CONFIG_DYNAMIC_FTRACE
int ftrace_arch_code_modify_prepare(void);
int ftrace_arch_code_modify_post_process(void);
void ftrace_bug(int err, unsigned long ip);
struct seq_file;
struct ftrace_probe_ops {
void (*func)(unsigned long ip,
unsigned long parent_ip,
void **data);
int (*init)(struct ftrace_probe_ops *ops,
unsigned long ip, void **data);
void (*free)(struct ftrace_probe_ops *ops,
unsigned long ip, void **data);
int (*print)(struct seq_file *m,
unsigned long ip,
struct ftrace_probe_ops *ops,
void *data);
};
extern int
register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
void *data);
extern void
unregister_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
void *data);
extern void
unregister_ftrace_function_probe_func(char *glob, struct ftrace_probe_ops *ops);
extern void unregister_ftrace_function_probe_all(char *glob);
extern int ftrace_text_reserved(void *start, void *end);
extern int ftrace_nr_registered_ops(void);
/*
* The dyn_ftrace record's flags field is split into two parts.
* the first part which is '0-FTRACE_REF_MAX' is a counter of
* the number of callbacks that have registered the function that
* the dyn_ftrace descriptor represents.
*
* The second part is a mask:
* ENABLED - the function is being traced
* REGS - the record wants the function to save regs
* REGS_EN - the function is set up to save regs.
* IPMODIFY - the record allows for the IP address to be changed.
* DISABLED - the record is not ready to be touched yet
*
* When a new ftrace_ops is registered and wants a function to save
* pt_regs, the rec->flag REGS is set. When the function has been
* set up to save regs, the REG_EN flag is set. Once a function
* starts saving regs it will do so until all ftrace_ops are removed
* from tracing that function.
*/
enum {
FTRACE_FL_ENABLED = (1UL << 31),
FTRACE_FL_REGS = (1UL << 30),
FTRACE_FL_REGS_EN = (1UL << 29),
FTRACE_FL_IPMODIFY = (1UL << 28),
FTRACE_FL_DISABLED = (1UL << 27),
};
#define FTRACE_REF_MAX_SHIFT 27
#define FTRACE_FL_BITS 5
#define FTRACE_FL_MASKED_BITS ((1UL << FTRACE_FL_BITS) - 1)
#define FTRACE_FL_MASK (FTRACE_FL_MASKED_BITS << FTRACE_REF_MAX_SHIFT)
#define FTRACE_REF_MAX ((1UL << FTRACE_REF_MAX_SHIFT) - 1)
struct dyn_ftrace {
union {
unsigned long ip; /* address of mcount call-site */
struct dyn_ftrace *freelist;
};
unsigned long flags;
struct dyn_arch_ftrace arch;
};
int ftrace_force_update(void);
int ftrace_set_filter_ip(struct ftrace_ops *ops, unsigned long ip,
int remove, int reset);
int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
int len, int reset);
int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
int len, int reset);
void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
void ftrace_free_filter(struct ftrace_ops *ops);
int register_ftrace_command(struct ftrace_func_command *cmd);
int unregister_ftrace_command(struct ftrace_func_command *cmd);
enum {
FTRACE_UPDATE_CALLS = (1 << 0),
FTRACE_DISABLE_CALLS = (1 << 1),
FTRACE_UPDATE_TRACE_FUNC = (1 << 2),
FTRACE_START_FUNC_RET = (1 << 3),
FTRACE_STOP_FUNC_RET = (1 << 4),
};
/*
* The FTRACE_UPDATE_* enum is used to pass information back
* from the ftrace_update_record() and ftrace_test_record()
* functions. These are called by the code update routines
* to find out what is to be done for a given function.
*
* IGNORE - The function is already what we want it to be
* MAKE_CALL - Start tracing the function
* MODIFY_CALL - Stop saving regs for the function
* MODIFY_CALL_REGS - Start saving regs for the function
* MAKE_NOP - Stop tracing the function
*/
enum {
FTRACE_UPDATE_IGNORE,
FTRACE_UPDATE_MAKE_CALL,
FTRACE_UPDATE_MODIFY_CALL,
FTRACE_UPDATE_MODIFY_CALL_REGS,
FTRACE_UPDATE_MAKE_NOP,
};
enum {
FTRACE_ITER_FILTER = (1 << 0),
FTRACE_ITER_NOTRACE = (1 << 1),
FTRACE_ITER_PRINTALL = (1 << 2),
FTRACE_ITER_DO_HASH = (1 << 3),
FTRACE_ITER_HASH = (1 << 4),
FTRACE_ITER_ENABLED = (1 << 5),
};
void arch_ftrace_update_code(int command);
struct ftrace_rec_iter;
struct ftrace_rec_iter *ftrace_rec_iter_start(void);
struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);
#define for_ftrace_rec_iter(iter) \
for (iter = ftrace_rec_iter_start(); \
iter; \
iter = ftrace_rec_iter_next(iter))
int ftrace_update_record(struct dyn_ftrace *rec, int enable);
int ftrace_test_record(struct dyn_ftrace *rec, int enable);
void ftrace_run_stop_machine(int command);
unsigned long ftrace_location(unsigned long ip);
unsigned long ftrace_location_range(unsigned long start, unsigned long end);
extern ftrace_func_t ftrace_trace_function;
int ftrace_regex_open(struct ftrace_ops *ops, int flag,
struct inode *inode, struct file *file);
ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
size_t cnt, loff_t *ppos);
ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
size_t cnt, loff_t *ppos);
int ftrace_regex_release(struct inode *inode, struct file *file);
void __init
ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);
/* defined in arch */
extern int ftrace_ip_converted(unsigned long ip);
extern int ftrace_dyn_arch_init(void *data);
extern void ftrace_replace_code(int enable);
extern int ftrace_update_ftrace_func(ftrace_func_t func);
extern void ftrace_caller(void);
extern void ftrace_regs_caller(void);
extern void ftrace_call(void);
extern void ftrace_regs_call(void);
extern void mcount_call(void);
void ftrace_modify_all_code(int command);
#ifndef FTRACE_ADDR
#define FTRACE_ADDR ((unsigned long)ftrace_caller)
#endif
#ifndef FTRACE_REGS_ADDR
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
# define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller)
#else
# define FTRACE_REGS_ADDR FTRACE_ADDR
#endif
#endif
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
extern void ftrace_graph_caller(void);
extern int ftrace_enable_ftrace_graph_caller(void);
extern int ftrace_disable_ftrace_graph_caller(void);
#else
static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
#endif
/**
* ftrace_make_nop - convert code into nop
* @mod: module structure if called by module load initialization
* @rec: the mcount call site record
* @addr: the address that the call site should be calling
*
* This is a very sensitive operation and great care needs
* to be taken by the arch. The operation should carefully
* read the location, check to see if what is read is indeed
* what we expect it to be, and then on success of the compare,
* it should write to the location.
*
* The code segment at @rec->ip should be a caller to @addr
*
* Return must be:
* 0 on success
* -EFAULT on error reading the location
* -EINVAL on a failed compare of the contents
* -EPERM on error writing to the location
* Any other value will be considered a failure.
*/
extern int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr);
/**
* ftrace_make_call - convert a nop call site into a call to addr
* @rec: the mcount call site record
* @addr: the address that the call site should call
*
* This is a very sensitive operation and great care needs
* to be taken by the arch. The operation should carefully
* read the location, check to see if what is read is indeed
* what we expect it to be, and then on success of the compare,
* it should write to the location.
*
* The code segment at @rec->ip should be a nop
*
* Return must be:
* 0 on success
* -EFAULT on error reading the location
* -EINVAL on a failed compare of the contents
* -EPERM on error writing to the location
* Any other value will be considered a failure.
*/
extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
/**
* ftrace_modify_call - convert from one addr to another (no nop)
* @rec: the mcount call site record
* @old_addr: the address expected to be currently called to
* @addr: the address to change to
*
* This is a very sensitive operation and great care needs
* to be taken by the arch. The operation should carefully
* read the location, check to see if what is read is indeed
* what we expect it to be, and then on success of the compare,
* it should write to the location.
*
* The code segment at @rec->ip should be a caller to @old_addr
*
* Return must be:
* 0 on success
* -EFAULT on error reading the location
* -EINVAL on a failed compare of the contents
* -EPERM on error writing to the location
* Any other value will be considered a failure.
*/
extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
unsigned long addr);
#else
/* Should never be called */
static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
unsigned long addr)
{
return -EINVAL;
}
#endif
/* May be defined in arch */
extern int ftrace_arch_read_dyn_info(char *buf, int size);
extern int skip_trace(unsigned long ip);
extern void ftrace_module_init(struct module *mod);
extern void ftrace_module_enable(struct module *mod);
extern void ftrace_release_mod(struct module *mod);
extern void ftrace_disable_daemon(void);
extern void ftrace_enable_daemon(void);
#else /* CONFIG_DYNAMIC_FTRACE */
static inline int skip_trace(unsigned long ip) { return 0; }
static inline int ftrace_force_update(void) { return 0; }
static inline void ftrace_disable_daemon(void) { }
static inline void ftrace_enable_daemon(void) { }
static inline void ftrace_module_init(struct module *mod) { }
static inline void ftrace_module_enable(struct module *mod) { }
static inline void ftrace_release_mod(struct module *mod) { }
static inline __init int register_ftrace_command(struct ftrace_func_command *cmd)
{
return -EINVAL;
}
static inline __init int unregister_ftrace_command(char *cmd_name)
{
return -EINVAL;
}
static inline int ftrace_text_reserved(void *start, void *end)
{
return 0;
}
static inline unsigned long ftrace_location(unsigned long ip)
{
return 0;
}
/*
* Again users of functions that have ftrace_ops may not
* have them defined when ftrace is not enabled, but these
* functions may still be called. Use a macro instead of inline.
*/
#define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; })
#define ftrace_set_early_filter(ops, buf, enable) do { } while (0)
#define ftrace_set_filter_ip(ops, ip, remove, reset) ({ -ENODEV; })
#define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; })
#define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; })
#define ftrace_free_filter(ops) do { } while (0)
static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
size_t cnt, loff_t *ppos) { return -ENODEV; }
static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
size_t cnt, loff_t *ppos) { return -ENODEV; }
static inline loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int whence)
{
return -ENODEV;
}
static inline int
ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }
#endif /* CONFIG_DYNAMIC_FTRACE */
loff_t ftrace_filter_lseek(struct file *file, loff_t offset, int whence);
/* totally disable ftrace - can not re-enable after this */
void ftrace_kill(void);
static inline void tracer_disable(void)
{
#ifdef CONFIG_FUNCTION_TRACER
ftrace_enabled = 0;
#endif
}
/*
* Ftrace disable/restore without lock. Some synchronization mechanism
* must be used to prevent ftrace_enabled to be changed between
* disable/restore.
*/
static inline int __ftrace_enabled_save(void)
{
#ifdef CONFIG_FUNCTION_TRACER
int saved_ftrace_enabled = ftrace_enabled;
ftrace_enabled = 0;
return saved_ftrace_enabled;
#else
return 0;
#endif
}
static inline void __ftrace_enabled_restore(int enabled)
{
#ifdef CONFIG_FUNCTION_TRACER
ftrace_enabled = enabled;
#endif
}
#ifndef HAVE_ARCH_CALLER_ADDR
# ifdef CONFIG_FRAME_POINTER
# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
# define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1))
# define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2))
# define CALLER_ADDR3 ((unsigned long)__builtin_return_address(3))
# define CALLER_ADDR4 ((unsigned long)__builtin_return_address(4))
# define CALLER_ADDR5 ((unsigned long)__builtin_return_address(5))
# define CALLER_ADDR6 ((unsigned long)__builtin_return_address(6))
# else
# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
# define CALLER_ADDR1 0UL
# define CALLER_ADDR2 0UL
# define CALLER_ADDR3 0UL
# define CALLER_ADDR4 0UL
# define CALLER_ADDR5 0UL
# define CALLER_ADDR6 0UL
# endif
#endif /* ifndef HAVE_ARCH_CALLER_ADDR */
#ifdef CONFIG_IRQSOFF_TRACER
extern void time_hardirqs_on(unsigned long a0, unsigned long a1);
extern void time_hardirqs_off(unsigned long a0, unsigned long a1);
#else
static inline void time_hardirqs_on(unsigned long a0, unsigned long a1) { }
static inline void time_hardirqs_off(unsigned long a0, unsigned long a1) { }
#endif
#ifdef CONFIG_PREEMPT_TRACER
extern void trace_preempt_on(unsigned long a0, unsigned long a1);
extern void trace_preempt_off(unsigned long a0, unsigned long a1);
#else
/*
* Use defines instead of static inlines because some arches will make code out
* of the CALLER_ADDR, when we really want these to be a real nop.
*/
# define trace_preempt_on(a0, a1) do { } while (0)
# define trace_preempt_off(a0, a1) do { } while (0)
#endif
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
extern void ftrace_init(void);
#else
static inline void ftrace_init(void) { }
#endif
/*
* Structure that defines an entry function trace.
*/
struct ftrace_graph_ent {
unsigned long func; /* Current function */
int depth;
};
/*
* Structure that defines a return function trace.
*/
struct ftrace_graph_ret {
unsigned long func; /* Current function */
unsigned long long calltime;
unsigned long long rettime;
/* Number of functions that overran the depth limit for current task */
unsigned long overrun;
int depth;
};
/* Type of the callback handlers for tracing function graph*/
typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */
typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* for init task */
#define INIT_FTRACE_GRAPH .ret_stack = NULL,
/*
* Stack of return addresses for functions
* of a thread.
* Used in struct thread_info
*/
struct ftrace_ret_stack {
unsigned long ret;
unsigned long func;
unsigned long long calltime;
unsigned long long subtime;
RH_KABI_REPLACE(unsigned long fp, unsigned long *retp)
};
/*
* Primary handler of a function return.
* It relays on ftrace_return_to_handler.
* Defined in entry_32/64.S
*/
extern void return_to_handler(void);
extern int
ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth,
unsigned long frame_pointer, unsigned long *retp);
unsigned long ftrace_graph_ret_addr(struct task_struct *task, int *idx,
unsigned long ret, unsigned long *retp);
/*
* Sometimes we don't want to trace a function with the function
* graph tracer but we want them to keep traced by the usual function
* tracer if the function graph tracer is not configured.
*/
#define __notrace_funcgraph notrace
/*
* We want to which function is an entrypoint of a hardirq.
* That will help us to put a signal on output.
*/
#define __irq_entry __attribute__((__section__(".irqentry.text")))
/* Limits of hardirq entrypoints */
extern char __irqentry_text_start[];
extern char __irqentry_text_end[];
#define FTRACE_RETFUNC_DEPTH 50
#define FTRACE_RETSTACK_ALLOC_SIZE 32
extern int register_ftrace_graph(trace_func_graph_ret_t retfunc,
trace_func_graph_ent_t entryfunc);
extern bool ftrace_graph_is_dead(void);
extern void ftrace_graph_stop(void);
/* The current handlers in use */
extern trace_func_graph_ret_t ftrace_graph_return;
extern trace_func_graph_ent_t ftrace_graph_entry;
extern void unregister_ftrace_graph(void);
extern void ftrace_graph_init_task(struct task_struct *t);
extern void ftrace_graph_exit_task(struct task_struct *t);
extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);
static inline int task_curr_ret_stack(struct task_struct *t)
{
return t->curr_ret_stack;
}
static inline void pause_graph_tracing(void)
{
atomic_inc(¤t->tracing_graph_pause);
}
static inline void unpause_graph_tracing(void)
{
atomic_dec(¤t->tracing_graph_pause);
}
#else /* !CONFIG_FUNCTION_GRAPH_TRACER */
#define __notrace_funcgraph
#define __irq_entry
#define INIT_FTRACE_GRAPH
static inline void ftrace_graph_init_task(struct task_struct *t) { }
static inline void ftrace_graph_exit_task(struct task_struct *t) { }
static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }
static inline int register_ftrace_graph(trace_func_graph_ret_t retfunc,
trace_func_graph_ent_t entryfunc)
{
return -1;
}
static inline void unregister_ftrace_graph(void) { }
static inline int task_curr_ret_stack(struct task_struct *tsk)
{
return -1;
}
static inline unsigned long
ftrace_graph_ret_addr(struct task_struct *task, int *idx, unsigned long ret,
unsigned long *retp)
{
return ret;
}
static inline void pause_graph_tracing(void) { }
static inline void unpause_graph_tracing(void) { }
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#ifdef CONFIG_TRACING
/* flags for current->trace */
enum {
TSK_TRACE_FL_TRACE_BIT = 0,
TSK_TRACE_FL_GRAPH_BIT = 1,
};
enum {
TSK_TRACE_FL_TRACE = 1 << TSK_TRACE_FL_TRACE_BIT,
TSK_TRACE_FL_GRAPH = 1 << TSK_TRACE_FL_GRAPH_BIT,
};
static inline void set_tsk_trace_trace(struct task_struct *tsk)
{
set_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
}
static inline void clear_tsk_trace_trace(struct task_struct *tsk)
{
clear_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
}
static inline int test_tsk_trace_trace(struct task_struct *tsk)
{
return tsk->trace & TSK_TRACE_FL_TRACE;
}
static inline void set_tsk_trace_graph(struct task_struct *tsk)
{
set_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
}
static inline void clear_tsk_trace_graph(struct task_struct *tsk)
{
clear_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
}
static inline int test_tsk_trace_graph(struct task_struct *tsk)
{
return tsk->trace & TSK_TRACE_FL_GRAPH;
}
enum ftrace_dump_mode;
extern enum ftrace_dump_mode ftrace_dump_on_oops;
extern void disable_trace_on_warning(void);
extern int __disable_trace_on_warning;
#ifdef CONFIG_PREEMPT
#define INIT_TRACE_RECURSION .trace_recursion = 0,
#endif
#else /* CONFIG_TRACING */
static inline void disable_trace_on_warning(void) { }
#endif /* CONFIG_TRACING */
#ifndef INIT_TRACE_RECURSION
#define INIT_TRACE_RECURSION
#endif
#ifdef CONFIG_FTRACE_SYSCALLS
unsigned long arch_syscall_addr(int nr);
#endif /* CONFIG_FTRACE_SYSCALLS */
#endif /* _LINUX_FTRACE_H */
Mini Shell