Current File : //usr/src/kernels/3.10.0-1160.80.1.el7.centos.plus.x86_64/include/drm/drm_drv.h
/*
* Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
* Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
* Copyright (c) 2009-2010, Code Aurora Forum.
* Copyright 2016 Intel Corp.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#ifndef _DRM_DRV_H_
#define _DRM_DRV_H_
#include <linux/list.h>
#include <linux/irqreturn.h>
#include <drm/drm_device.h>
struct drm_file;
struct drm_gem_object;
struct drm_master;
struct drm_minor;
struct dma_buf_attachment;
struct drm_display_mode;
struct drm_mode_create_dumb;
struct drm_printer;
/* driver capabilities and requirements mask */
#define DRIVER_USE_AGP 0x1
#define DRIVER_LEGACY 0x2
#define DRIVER_PCI_DMA 0x8
#define DRIVER_SG 0x10
#define DRIVER_HAVE_DMA 0x20
#define DRIVER_HAVE_IRQ 0x40
#define DRIVER_IRQ_SHARED 0x80
#define DRIVER_GEM 0x1000
#define DRIVER_MODESET 0x2000
#define DRIVER_PRIME 0x4000
#define DRIVER_RENDER 0x8000
#define DRIVER_ATOMIC 0x10000
#define DRIVER_KMS_LEGACY_CONTEXT 0x20000
#define DRIVER_SYNCOBJ 0x40000
/**
* struct drm_driver - DRM driver structure
*
* This structure represent the common code for a family of cards. There will
* one drm_device for each card present in this family. It contains lots of
* vfunc entries, and a pile of those probably should be moved to more
* appropriate places like &drm_mode_config_funcs or into a new operations
* structure for GEM drivers.
*/
struct drm_driver {
/**
* @load:
*
* Backward-compatible driver callback to complete
* initialization steps after the driver is registered. For
* this reason, may suffer from race conditions and its use is
* deprecated for new drivers. It is therefore only supported
* for existing drivers not yet converted to the new scheme.
* See drm_dev_init() and drm_dev_register() for proper and
* race-free way to set up a &struct drm_device.
*
* This is deprecated, do not use!
*
* Returns:
*
* Zero on success, non-zero value on failure.
*/
int (*load) (struct drm_device *, unsigned long flags);
/**
* @open:
*
* Driver callback when a new &struct drm_file is opened. Useful for
* setting up driver-private data structures like buffer allocators,
* execution contexts or similar things. Such driver-private resources
* must be released again in @postclose.
*
* Since the display/modeset side of DRM can only be owned by exactly
* one &struct drm_file (see &drm_file.is_master and &drm_device.master)
* there should never be a need to set up any modeset related resources
* in this callback. Doing so would be a driver design bug.
*
* Returns:
*
* 0 on success, a negative error code on failure, which will be
* promoted to userspace as the result of the open() system call.
*/
int (*open) (struct drm_device *, struct drm_file *);
/**
* @postclose:
*
* One of the driver callbacks when a new &struct drm_file is closed.
* Useful for tearing down driver-private data structures allocated in
* @open like buffer allocators, execution contexts or similar things.
*
* Since the display/modeset side of DRM can only be owned by exactly
* one &struct drm_file (see &drm_file.is_master and &drm_device.master)
* there should never be a need to tear down any modeset related
* resources in this callback. Doing so would be a driver design bug.
*/
void (*postclose) (struct drm_device *, struct drm_file *);
/**
* @lastclose:
*
* Called when the last &struct drm_file has been closed and there's
* currently no userspace client for the &struct drm_device.
*
* Modern drivers should only use this to force-restore the fbdev
* framebuffer using drm_fb_helper_restore_fbdev_mode_unlocked().
* Anything else would indicate there's something seriously wrong.
* Modern drivers can also use this to execute delayed power switching
* state changes, e.g. in conjunction with the :ref:`vga_switcheroo`
* infrastructure.
*
* This is called after @postclose hook has been called.
*
* NOTE:
*
* All legacy drivers use this callback to de-initialize the hardware.
* This is purely because of the shadow-attach model, where the DRM
* kernel driver does not really own the hardware. Instead ownershipe is
* handled with the help of userspace through an inheritedly racy dance
* to set/unset the VT into raw mode.
*
* Legacy drivers initialize the hardware in the @firstopen callback,
* which isn't even called for modern drivers.
*/
void (*lastclose) (struct drm_device *);
/**
* @unload:
*
* Reverse the effects of the driver load callback. Ideally,
* the clean up performed by the driver should happen in the
* reverse order of the initialization. Similarly to the load
* hook, this handler is deprecated and its usage should be
* dropped in favor of an open-coded teardown function at the
* driver layer. See drm_dev_unregister() and drm_dev_put()
* for the proper way to remove a &struct drm_device.
*
* The unload() hook is called right after unregistering
* the device.
*
*/
void (*unload) (struct drm_device *);
/**
* @release:
*
* Optional callback for destroying device data after the final
* reference is released, i.e. the device is being destroyed. Drivers
* using this callback are responsible for calling drm_dev_fini()
* to finalize the device and then freeing the struct themselves.
*/
void (*release) (struct drm_device *);
/**
* @get_vblank_counter:
*
* Driver callback for fetching a raw hardware vblank counter for the
* CRTC specified with the pipe argument. If a device doesn't have a
* hardware counter, the driver can simply leave the hook as NULL.
* The DRM core will account for missed vblank events while interrupts
* where disabled based on system timestamps.
*
* Wraparound handling and loss of events due to modesetting is dealt
* with in the DRM core code, as long as drivers call
* drm_crtc_vblank_off() and drm_crtc_vblank_on() when disabling or
* enabling a CRTC.
*
* This is deprecated and should not be used by new drivers.
* Use &drm_crtc_funcs.get_vblank_counter instead.
*
* Returns:
*
* Raw vblank counter value.
*/
u32 (*get_vblank_counter) (struct drm_device *dev, unsigned int pipe);
/**
* @enable_vblank:
*
* Enable vblank interrupts for the CRTC specified with the pipe
* argument.
*
* This is deprecated and should not be used by new drivers.
* Use &drm_crtc_funcs.enable_vblank instead.
*
* Returns:
*
* Zero on success, appropriate errno if the given @crtc's vblank
* interrupt cannot be enabled.
*/
int (*enable_vblank) (struct drm_device *dev, unsigned int pipe);
/**
* @disable_vblank:
*
* Disable vblank interrupts for the CRTC specified with the pipe
* argument.
*
* This is deprecated and should not be used by new drivers.
* Use &drm_crtc_funcs.disable_vblank instead.
*/
void (*disable_vblank) (struct drm_device *dev, unsigned int pipe);
/**
* @get_scanout_position:
*
* Called by vblank timestamping code.
*
* Returns the current display scanout position from a crtc, and an
* optional accurate ktime_get() timestamp of when position was
* measured. Note that this is a helper callback which is only used if a
* driver uses drm_calc_vbltimestamp_from_scanoutpos() for the
* @get_vblank_timestamp callback.
*
* Parameters:
*
* dev:
* DRM device.
* pipe:
* Id of the crtc to query.
* in_vblank_irq:
* True when called from drm_crtc_handle_vblank(). Some drivers
* need to apply some workarounds for gpu-specific vblank irq quirks
* if flag is set.
* vpos:
* Target location for current vertical scanout position.
* hpos:
* Target location for current horizontal scanout position.
* stime:
* Target location for timestamp taken immediately before
* scanout position query. Can be NULL to skip timestamp.
* etime:
* Target location for timestamp taken immediately after
* scanout position query. Can be NULL to skip timestamp.
* mode:
* Current display timings.
*
* Returns vpos as a positive number while in active scanout area.
* Returns vpos as a negative number inside vblank, counting the number
* of scanlines to go until end of vblank, e.g., -1 means "one scanline
* until start of active scanout / end of vblank."
*
* Returns:
*
* True on success, false if a reliable scanout position counter could
* not be read out.
*
* FIXME:
*
* Since this is a helper to implement @get_vblank_timestamp, we should
* move it to &struct drm_crtc_helper_funcs, like all the other
* helper-internal hooks.
*/
bool (*get_scanout_position) (struct drm_device *dev, unsigned int pipe,
bool in_vblank_irq, int *vpos, int *hpos,
ktime_t *stime, ktime_t *etime,
const struct drm_display_mode *mode);
/**
* @get_vblank_timestamp:
*
* Called by drm_get_last_vbltimestamp(). Should return a precise
* timestamp when the most recent VBLANK interval ended or will end.
*
* Specifically, the timestamp in @vblank_time should correspond as
* closely as possible to the time when the first video scanline of
* the video frame after the end of VBLANK will start scanning out,
* the time immediately after end of the VBLANK interval. If the
* @crtc is currently inside VBLANK, this will be a time in the future.
* If the @crtc is currently scanning out a frame, this will be the
* past start time of the current scanout. This is meant to adhere
* to the OpenML OML_sync_control extension specification.
*
* Paramters:
*
* dev:
* dev DRM device handle.
* pipe:
* crtc for which timestamp should be returned.
* max_error:
* Maximum allowable timestamp error in nanoseconds.
* Implementation should strive to provide timestamp
* with an error of at most max_error nanoseconds.
* Returns true upper bound on error for timestamp.
* vblank_time:
* Target location for returned vblank timestamp.
* in_vblank_irq:
* True when called from drm_crtc_handle_vblank(). Some drivers
* need to apply some workarounds for gpu-specific vblank irq quirks
* if flag is set.
*
* Returns:
*
* True on success, false on failure, which means the core should
* fallback to a simple timestamp taken in drm_crtc_handle_vblank().
*
* FIXME:
*
* We should move this hook to &struct drm_crtc_funcs like all the other
* vblank hooks.
*/
bool (*get_vblank_timestamp) (struct drm_device *dev, unsigned int pipe,
int *max_error,
ktime_t *vblank_time,
bool in_vblank_irq);
/**
* @irq_handler:
*
* Interrupt handler called when using drm_irq_install(). Not used by
* drivers which implement their own interrupt handling.
*/
irqreturn_t(*irq_handler) (int irq, void *arg);
/**
* @irq_preinstall:
*
* Optional callback used by drm_irq_install() which is called before
* the interrupt handler is registered. This should be used to clear out
* any pending interrupts (from e.g. firmware based drives) and reset
* the interrupt handling registers.
*/
void (*irq_preinstall) (struct drm_device *dev);
/**
* @irq_postinstall:
*
* Optional callback used by drm_irq_install() which is called after
* the interrupt handler is registered. This should be used to enable
* interrupt generation in the hardware.
*/
int (*irq_postinstall) (struct drm_device *dev);
/**
* @irq_uninstall:
*
* Optional callback used by drm_irq_uninstall() which is called before
* the interrupt handler is unregistered. This should be used to disable
* interrupt generation in the hardware.
*/
void (*irq_uninstall) (struct drm_device *dev);
/**
* @master_create:
*
* Called whenever a new master is created. Only used by vmwgfx.
*/
int (*master_create)(struct drm_device *dev, struct drm_master *master);
/**
* @master_destroy:
*
* Called whenever a master is destroyed. Only used by vmwgfx.
*/
void (*master_destroy)(struct drm_device *dev, struct drm_master *master);
/**
* @master_set:
*
* Called whenever the minor master is set. Only used by vmwgfx.
*/
int (*master_set)(struct drm_device *dev, struct drm_file *file_priv,
bool from_open);
/**
* @master_drop:
*
* Called whenever the minor master is dropped. Only used by vmwgfx.
*/
void (*master_drop)(struct drm_device *dev, struct drm_file *file_priv);
/**
* @debugfs_init:
*
* Allows drivers to create driver-specific debugfs files.
*/
int (*debugfs_init)(struct drm_minor *minor);
/**
* @gem_free_object: deconstructor for drm_gem_objects
*
* This is deprecated and should not be used by new drivers. Use
* @gem_free_object_unlocked instead.
*/
void (*gem_free_object) (struct drm_gem_object *obj);
/**
* @gem_free_object_unlocked: deconstructor for drm_gem_objects
*
* This is for drivers which are not encumbered with &drm_device.struct_mutex
* legacy locking schemes. Use this hook instead of @gem_free_object.
*/
void (*gem_free_object_unlocked) (struct drm_gem_object *obj);
/**
* @gem_open_object:
*
* Driver hook called upon gem handle creation
*/
int (*gem_open_object) (struct drm_gem_object *, struct drm_file *);
/**
* @gem_close_object:
*
* Driver hook called upon gem handle release
*/
void (*gem_close_object) (struct drm_gem_object *, struct drm_file *);
/**
* @gem_print_info:
*
* If driver subclasses struct &drm_gem_object, it can implement this
* optional hook for printing additional driver specific info.
*
* drm_printf_indent() should be used in the callback passing it the
* indent argument.
*
* This callback is called from drm_gem_print_info().
*/
void (*gem_print_info)(struct drm_printer *p, unsigned int indent,
const struct drm_gem_object *obj);
/**
* @gem_create_object: constructor for gem objects
*
* Hook for allocating the GEM object struct, for use by core
* helpers.
*/
struct drm_gem_object *(*gem_create_object)(struct drm_device *dev,
size_t size);
/* prime: */
/**
* @prime_handle_to_fd:
*
* export handle -> fd (see drm_gem_prime_handle_to_fd() helper)
*/
int (*prime_handle_to_fd)(struct drm_device *dev, struct drm_file *file_priv,
uint32_t handle, uint32_t flags, int *prime_fd);
/**
* @prime_fd_to_handle:
*
* import fd -> handle (see drm_gem_prime_fd_to_handle() helper)
*/
int (*prime_fd_to_handle)(struct drm_device *dev, struct drm_file *file_priv,
int prime_fd, uint32_t *handle);
/**
* @gem_prime_export:
*
* export GEM -> dmabuf
*
* This defaults to drm_gem_prime_export() if not set.
*/
struct dma_buf * (*gem_prime_export)(struct drm_device *dev,
struct drm_gem_object *obj, int flags);
/**
* @gem_prime_import:
*
* import dmabuf -> GEM
*
* This defaults to drm_gem_prime_import() if not set.
*/
struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev,
struct dma_buf *dma_buf);
int (*gem_prime_pin)(struct drm_gem_object *obj);
void (*gem_prime_unpin)(struct drm_gem_object *obj);
struct reservation_object * (*gem_prime_res_obj)(
struct drm_gem_object *obj);
struct sg_table *(*gem_prime_get_sg_table)(struct drm_gem_object *obj);
struct drm_gem_object *(*gem_prime_import_sg_table)(
struct drm_device *dev,
struct dma_buf_attachment *attach,
struct sg_table *sgt);
void *(*gem_prime_vmap)(struct drm_gem_object *obj);
void (*gem_prime_vunmap)(struct drm_gem_object *obj, void *vaddr);
int (*gem_prime_mmap)(struct drm_gem_object *obj,
struct vm_area_struct *vma);
/**
* @dumb_create:
*
* This creates a new dumb buffer in the driver's backing storage manager (GEM,
* TTM or something else entirely) and returns the resulting buffer handle. This
* handle can then be wrapped up into a framebuffer modeset object.
*
* Note that userspace is not allowed to use such objects for render
* acceleration - drivers must create their own private ioctls for such a use
* case.
*
* Width, height and depth are specified in the &drm_mode_create_dumb
* argument. The callback needs to fill the handle, pitch and size for
* the created buffer.
*
* Called by the user via ioctl.
*
* Returns:
*
* Zero on success, negative errno on failure.
*/
int (*dumb_create)(struct drm_file *file_priv,
struct drm_device *dev,
struct drm_mode_create_dumb *args);
/**
* @dumb_map_offset:
*
* Allocate an offset in the drm device node's address space to be able to
* memory map a dumb buffer.
*
* The default implementation is drm_gem_create_mmap_offset(). GEM based
* drivers must not overwrite this.
*
* Called by the user via ioctl.
*
* Returns:
*
* Zero on success, negative errno on failure.
*/
int (*dumb_map_offset)(struct drm_file *file_priv,
struct drm_device *dev, uint32_t handle,
uint64_t *offset);
/**
* @dumb_destroy:
*
* This destroys the userspace handle for the given dumb backing storage buffer.
* Since buffer objects must be reference counted in the kernel a buffer object
* won't be immediately freed if a framebuffer modeset object still uses it.
*
* Called by the user via ioctl.
*
* The default implementation is drm_gem_dumb_destroy(). GEM based drivers
* must not overwrite this.
*
* Returns:
*
* Zero on success, negative errno on failure.
*/
int (*dumb_destroy)(struct drm_file *file_priv,
struct drm_device *dev,
uint32_t handle);
/**
* @gem_vm_ops: Driver private ops for this object
*/
const struct vm_operations_struct *gem_vm_ops;
/** @major: driver major number */
int major;
/** @minor: driver minor number */
int minor;
/** @patchlevel: driver patch level */
int patchlevel;
/** @name: driver name */
char *name;
/** @desc: driver description */
char *desc;
/** @date: driver date */
char *date;
/** @driver_features: driver features */
u32 driver_features;
/**
* @ioctls:
*
* Array of driver-private IOCTL description entries. See the chapter on
* :ref:`IOCTL support in the userland interfaces
* chapter<drm_driver_ioctl>` for the full details.
*/
const struct drm_ioctl_desc *ioctls;
/** @num_ioctls: Number of entries in @ioctls. */
int num_ioctls;
/**
* @fops:
*
* File operations for the DRM device node. See the discussion in
* :ref:`file operations<drm_driver_fops>` for in-depth coverage and
* some examples.
*/
const struct file_operations *fops;
/* Everything below here is for legacy driver, never use! */
/* private: */
/* List of devices hanging off this driver with stealth attach. */
struct list_head legacy_dev_list;
int (*firstopen) (struct drm_device *);
void (*preclose) (struct drm_device *, struct drm_file *file_priv);
int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv);
int (*dma_quiescent) (struct drm_device *);
int (*context_dtor) (struct drm_device *dev, int context);
int dev_priv_size;
};
extern unsigned int drm_debug;
int drm_dev_init(struct drm_device *dev,
struct drm_driver *driver,
struct device *parent);
void drm_dev_fini(struct drm_device *dev);
struct drm_device *drm_dev_alloc(struct drm_driver *driver,
struct device *parent);
int drm_dev_register(struct drm_device *dev, unsigned long flags);
void drm_dev_unregister(struct drm_device *dev);
void drm_dev_get(struct drm_device *dev);
void drm_dev_put(struct drm_device *dev);
void drm_put_dev(struct drm_device *dev);
bool drm_dev_enter(struct drm_device *dev, int *idx);
void drm_dev_exit(int idx);
void drm_dev_unplug(struct drm_device *dev);
/**
* drm_dev_is_unplugged - is a DRM device unplugged
* @dev: DRM device
*
* This function can be called to check whether a hotpluggable is unplugged.
* Unplugging itself is singalled through drm_dev_unplug(). If a device is
* unplugged, these two functions guarantee that any store before calling
* drm_dev_unplug() is visible to callers of this function after it completes
*/
static inline bool drm_dev_is_unplugged(struct drm_device *dev)
{
int idx;
if (drm_dev_enter(dev, &idx)) {
drm_dev_exit(idx);
return false;
}
return true;
}
/**
* drm_core_check_feature - check driver feature flags
* @dev: DRM device to check
* @feature: feature flag
*
* This checks @dev for driver features, see &drm_driver.driver_features,
* &drm_device.driver_features, and the various DRIVER_\* flags.
*
* Returns true if the @feature is supported, false otherwise.
*/
static inline bool drm_core_check_feature(struct drm_device *dev, u32 feature)
{
return dev->driver->driver_features & dev->driver_features & feature;
}
/**
* drm_drv_uses_atomic_modeset - check if the driver implements
* atomic_commit()
* @dev: DRM device
*
* This check is useful if drivers do not have DRIVER_ATOMIC set but
* have atomic modesetting internally implemented.
*/
static inline bool drm_drv_uses_atomic_modeset(struct drm_device *dev)
{
return drm_core_check_feature(dev, DRIVER_ATOMIC) ||
(dev->mode_config.funcs && dev->mode_config.funcs->atomic_commit != NULL);
}
int drm_dev_set_unique(struct drm_device *dev, const char *name);
#endif
Mini Shell