Current File : //usr/share/zsh/5.0.2/functions/_systemd
#compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent machinectl
_ctls()
{
local curcontext="$curcontext" state lstate line
case "$service" in
systemctl)
# -s for aggregated options like -aP
_arguments -s \
{-h,--help}'[Show help]' \
'--version[Show package version]' \
{-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \
\*{-p,--property=}'[Show only properties by specific name]:unit property' \
{-a,--all}'[Show all units/properties, including dead/empty ones]' \
'--reverse[Show reverse dependencies]' \
'--after[Show units ordered after]' \
'--before[Show units ordered before]' \
'--failed[Show only failed units]' \
{-l,--full}"[Don't ellipsize unit names on output]" \
'--fail[When queueing a new job, fail if conflicting jobs are pending]' \
'--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \
'--kill-who=[Who to send signal to]:killwho:(main control all)' \
{-s,--signal=}'[Which signal to send]:signal:_signals' \
{-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
{-P,--privileged}'[Acquire privileges before execution]' \
{-q,--quiet}'[Suppress output]' \
'--no-block[Do not wait until operation finished]' \
"--no-wall[Don't send wall message before halt/power-off/reboot]" \
"--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \
'--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \
'--no-pager[Do not pipe output into a pager]' \
'--no-ask-password[Do not ask for system passwords]' \
'--system[Connect to system manager]' \
'--user[Connect to user service manager]' \
'--global[Enable/disable unit files globally]' \
{-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \
'--root=[Enable unit files in the specified root directory]:directory:_directories' \
'--runtime[Enable unit files only temporarily until next reboot]' \
{-n,--lines=}'[Journal entries to show]:number of entries' \
{-o,--output=}'[Change journal output mode]:modes:_outputmodes' \
'*::systemctl command:_systemctl_command'
;;
loginctl)
_arguments -s \
{-h,--help}'[Show help]' \
'--version[Show package version]' \
\*{-p,--property=}'[Show only properties by this name]:unit property' \
{-a,--all}'[Show all properties, including empty ones]' \
'--kill-who=[Who to send signal to]:killwho:(main control all)' \
{-s,--signal=}'[Which signal to send]:signal:_signals' \
'--no-ask-password[Do not ask for system passwords]' \
{-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
{-P,--privileged}'[Acquire privileges before execution]' \
'--no-pager[Do not pipe output into a pager]' \
'*::loginctl command:_loginctl_command'
;;
hostnamectl)
_arguments -s \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--transient[Only set transient hostname]' \
'--static[Only set static hostname]' \
'--pretty[Only set pretty hostname]' \
'--no-ask-password[Do not prompt for password]' \
{-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
'*::hostnamectl commands:_hostnamectl_command'
;;
journalctl)
_arguments -s \
'--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
'--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
{-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \
'--system[Show system and kernel messages]' \
'--user[Show messages from user services]' \
{-b,--this-boot}'[Show data only from current boot]' \
{-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
'--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \
{-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
{-f,--follow}'[Follow journal]' \
{-n,--lines=}'[Number of journal entries to show]:integer' \
'--no-tail[Show all lines, even in follow mode]' \
{-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \
{-l,--full}'[Show long fields in full]' \
{-a,--all}'[Show all fields, including long and unprintable]' \
{-q,--quiet}"[Don't show privilege warning]" \
'--no-pager[Do not pipe output into a pager]' \
{-m,--merge}'[Show entries from all available journals]' \
{-D,--directory=}'[Show journal files from directory]:directories:_directories' \
'--interval=[Time interval for changing the FSS sealing key]:time interval' \
'--verify-key=[Specify FSS verification key]:FSS key' \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--new-id128[Generate a new 128 Bit ID]' \
'--header[Show journal header information]' \
'--disk-usage[Show total disk usage]' \
{-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \
'--setup-keys[Generate new FSS key pair]' \
'--verify[Verify journal file consistency]' \
'--list-catalog[List messages in catalog]' \
'--update-catalog[Update binary catalog database]' \
'*::default: _journal_none'
;;
localectl)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
"--no-convert[Don't convert keyboard mappings]" \
'--no-pager[Do not pipe output into a pager]' \
'--no-ask-password[Do not prompt for password]' \
{-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
'*::localectl commands:_localectl_command'
;;
systemd-coredumpctl)
_arguments \
{-o,--output=}'[Write output to FILE]:output file:_files' \
'--no-pager[Do not pipe output into a pager]' \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'*::systemd-coredumpctl commands:_systemd-coredumpctl_command'
;;
timedatectl)
_arguments -s \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
'--no-pager[Do not pipe output into a pager]' \
'--no-ask-password[Do not prompt for password]' \
{-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
'*::timedatectl commands:_timedatectl_command'
;;
udevadm)
_arguments \
'--debug[Print debug messages to stderr]' \
'--version[Print version number]' \
'--help[Print help text]' \
'*::udevadm commands:_udevadm_command'
;;
systemd-analyze)
_arguments \
{-h,--help}'[Show help text.]' \
'--user[Shows performance data of user sessions instead of the system manager.]' \
'--order[When generating graph for dot, show only order]' \
'--require[When generating graph for dot, show only requirement]' \
'*::systemd-analyze commands:_systemd_analyze_command'
;;
systemd-ask-password)
_arguments \
{-h,--help}'[Show this help]' \
'--icon=[Icon name]' \
'--timeout=[Timeout in sec]' \
'--no-tty[Ask question via agent even on TTY]' \
'--accept-cached[Accept cached passwords]' \
'--multiple[List multiple passwords if available]'
;;
systemd-cat)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version.]' \
{-t,--identifier=}'[Set syslog identifier.]' \
{-p,--priority=}'[Set priority value.]:value:({0..7})' \
'--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
':Message'
;;
systemd-cgls)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--no-pager[Do not pipe output into a pager]' \
{-a,--all}'[Show all groups, including empty]' \
'-k[Include kernel threads in output]' \
':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)'
;;
systemd-cgtop)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Print version and exit]' \
'(-c -m -i -t)-p[Order by path]' \
'(-c -p -m -i)-t[Order by number of tasks]' \
'(-m -p -i -t)-c[Order by CPU load]' \
'(-c -p -i -t)-m[Order by memory load]' \
'(-c -m -p -t)-i[Order by IO load]' \
{-d,--delay=}'[Specify delay]' \
{-n,--iterations=}'[Run for N iterations before exiting]' \
{-b,--batch}'[Run in batch mode, accepting no input]' \
'--depth=[Maximum traversal depth]'
;;
systemd-delta)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--no-pager[Do not pipe output into a pager]' \
'--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
{-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \
':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
;;
systemd-detect-virt)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
{-c,--container}'[Only detect whether we are run in a container]' \
{-v,--vm}'[Only detect whether we are run in a VM]' \
{-q,--quiet}"[Don't output anything, just set return value]"
;;
systemd-inhibit)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \
'--who=[A descriptive string who is inhibiting]' \
'--why=[A descriptive string why is being inhibited]' \
'--mode=[One of block or delay]' \
'--list[List active inhibitors]' \
'*:commands:_systemd_inhibit_command'
;;
systemd-machine-id-setup)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]'
;;
systemd-notify)
_arguments \
{-h,--help}'[Show this help]' \
'--version[Show package version]' \
'--ready[Inform the init system about service start-up completion.]' \
'--pid=[Inform the init system about the main PID of the daemon]' \
'--status=[Send a free-form status string for the daemon to the init systemd]' \
'--booted[Returns 0 if the system was booted up with systemd]' \
'--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)'
;;
systemd-nspawn)
_arguments \
{-h,--help}'[Show this help]' \
{--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \
{--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \
{--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \
'--uuid=[Set the specified uuid for the container.]' \
{--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \
'--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \
'--read-only[Mount the root file system read only for the container.]' \
'--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \
"--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \
'-j[Equivalent to --link-journal=guest.]'
;;
systemd-tmpfiles)
_arguments \
'--create[Create, set ownership/permissions based on the config files.]' \
'--clean[Clean up all files and directories with an age parameter configured.]' \
'--remove[All files and directories marked with r, R in the configuration files are removed.]' \
'--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
'--exclude-prefix=[Ignore rules that apply to paths with the specified prefix.]' \
'--help[Prints a short help text and exits.]' \
'*::files:_files'
;;
systemd-tty-ask-password-agent)
_arguments \
{-h,--help}'[Prints a short help text and exits.]' \
'--version[Prints a short version string and exits.]' \
'--list[Lists all currently pending system password requests.]' \
'--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
'--watch[Continuously process password requests.]' \
'--wall[Forward password requests to wall(1).]' \
'--plymouth[Ask question with plymouth(8).]' \
'--console[Ask question on /dev/console.]'
;;
machinectl)
_arguments \
{-h,--help}'[Prints a short help text and exits.]' \
'--version[Prints a short version string and exits.]' \
{-p,--property=}'[Limit output to specified property.]:property:(Name Id Timestamp TimestampMonotonic Service Scope Leader Class State RootDirectory)' \
{-a,--all}'[Show all proerties]' \
(-l,--full)'[Do not ellipsize cgroup members]' \
'--no-pager[Do not pipe output into a pager]' \
'--no-ask-password[Do not ask for system passwords]' \
'--kill-who=[Who to send signal to]:killwho:(leader all)' \
{-s,--signal=}'[Which signal to send]:signal:_signals' \
{-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
{-P,--privileged}'[Acquire privileges before execution]' \
'*::machinectl command:_machinectl_command'
;;
*) _message 'eh?' ;;
esac
}
_systemd-nspawn(){
local -a _caps
_caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH
CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE
CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP
CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG
CAP_SYS_RESOURCE CAP_SYS_BOOT )
_values -s , 'capabilities' "$_caps[@]"
}
_systemd_inhibit_command(){
if (( CURRENT == 1 )); then
compset -q
_normal
else
local n=${words[(b:2:i)[^-]*]}
if (( n <= CURRENT )); then
compset -n $n
_alternative \
'files:file:_files' \
'commands:command:_normal' && return 0
fi
_default
fi
}
_systemd_analyze_command(){
local -a _systemd_analyze_cmds
# Descriptions taken from systemd-analyze --help.
_systemd_analyze_cmds=(
'time:Print time spent in the kernel before reaching userspace'
'blame:Print list of running units ordered by time to init'
'critical-chain:Print a tree of the time critical chain of units'
'plot:Output SVG graphic showing service initialization'
'dot:Dump dependency graph (in dot(1) format)'
)
if (( CURRENT == 1 )); then
_describe "options" _systemd_analyze_cmds
else
_message "no more options"
fi
}
_hosts_or_user_at_host()
{
_alternative \
'users-hosts:: _user_at_host' \
'hosts:: _hosts'
}
_outputmodes() {
local -a _output_opts
_output_opts=(short short-monotonic verbose export json json-pretty json-see cat)
_describe -t output 'output mode' _output_opts || compadd "$@"
}
(( $+functions[_systemctl_command] )) || _systemctl_command()
{
local -a _systemctl_cmds
_systemctl_cmds=(
"list-units:List units"
"start:Start (activate) one or more units"
"stop:Stop (deactivate) one or more units"
"reload:Reload one or more units"
"restart:Start or restart one or more units"
"condrestart:Restart one or more units if active"
"try-restart:Restart one or more units if active"
"reload-or-restart:Reload one or more units if possible, otherwise start or restart"
"force-reload:Reload one or more units if possible, otherwise restart if active"
"hibernate:Hibernate the system"
"hybrid-sleep:Hibernate and suspend the system"
"reload-or-try-restart:Reload one or more units if possible, otherwise restart if active"
"isolate:Start one unit and stop all others"
"kill:Send signal to processes of a unit"
"is-active:Check whether units are active"
"is-failed:Check whether units are failed"
"status:Show runtime status of one or more units"
"show:Show properties of one or more units/jobs or the manager"
"reset-failed:Reset failed state for all, one, or more units"
"load:Load one or more units"
"list-unit-files:List installed unit files"
"enable:Enable one or more unit files"
"disable:Disable one or more unit files"
"reenable:Reenable one or more unit files"
"preset:Enable/disable one or more unit files based on preset configuration"
"help:Show documentation for specified units"
"list-dependencies:Show unit dependency tree"
"mask:Mask one or more units"
"unmask:Unmask one or more units"
"link:Link one or more units files into the search path"
"is-enabled:Check whether unit files are enabled"
"list-jobs:List jobs"
"cancel:Cancel all, one, or more jobs"
"dump:Dump server status"
"snapshot:Create a snapshot"
"delete:Remove one or more snapshots"
"show-environment:Dump environment"
"set-environment:Set one or more environment variables"
"unset-environment:Unset one or more environment variables"
"daemon-reload:Reload systemd manager configuration"
"daemon-reexec:Reexecute systemd manager"
"default:Enter system default mode"
"rescue:Enter system rescue mode"
"emergency:Enter system emergency mode"
"halt:Shut down and halt the system"
"suspend:Suspend the system"
"poweroff:Shut down and power-off the system"
"reboot:Shut down and reboot the system"
"kexec:Shut down and reboot the system with kexec"
"exit:Ask for user instance termination"
)
if (( CURRENT == 1 )); then
_describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@"
else
local curcontext="$curcontext"
cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}"
# Deal with any aliases
case $cmd in
condrestart) cmd="try-restart";;
force-reload) cmd="reload-or-try-restart";;
esac
if (( $#cmd )); then
curcontext="${curcontext%:*:*}:systemctl-${cmd}:"
local update_policy
zstyle -s ":completion:${curcontext}:" cache-policy update_policy
if [[ -z "$update_policy" ]]; then
zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy
fi
_call_function ret _systemctl_$cmd || _message 'no more arguments'
else
_message "unknown systemctl command: $words[1]"
fi
return ret
fi
}
__systemctl()
{
local -a _modes
_modes=("--user" "--system")
systemctl ${words:*_modes} --full --no-legend --no-pager "$@"
}
# Fills the unit list
_systemctl_all_units()
{
if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) &&
! _retrieve_cache SYS_ALL_UNITS;
then
_sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo " $a"; done; }) )
_store_cache SYS_ALL_UNITS _sys_all_units
fi
}
# Fills the unit list including all file units
_systemctl_really_all_units()
{
local -a all_unit_files;
local -a really_all_units;
if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) &&
! _retrieve_cache SYS_REALLY_ALL_UNITS;
then
all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo " $a"; done; }) )
_systemctl_all_units
really_all_units=($_sys_all_units $all_unit_files)
_sys_really_all_units=(${(u)really_all_units})
_store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units
fi
}
_filter_units_by_property() {
local property=$1 value=$2 ; shift ; shift
local -a units ; units=($*)
local prop unit
for ((i=1; $i <= ${#units[*]}; i++)); do
# FIXME: "Failed to issue method call: Unknown unit" errors are ignored for
# now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to
# revert to calling 'systemctl show' once for all units, which is way
# faster
unit=${units[i]}
prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"}
if [[ "${prop}" = "$property=$value" ]]; then
echo " ${unit}"
fi
done
}
_systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo " $a"; done; }) )}
_systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" || $c == "failed" ]] && echo " $a"; done; }) )}
_systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo " $a"; done; }) )}
_systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo " $a"; done; }) )}
_systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo " $a"; done; }) )}
_systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo " $a"; done; }) )}
# Completion functions for ALL_UNITS
for fun in is-active is-failed is-enabled status show mask preset help list-dependencies ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
_systemctl_really_all_units
compadd "$@" -a - _sys_really_all_units
}
done
# Completion functions for ENABLED_UNITS
for fun in disable reenable ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
_systemctl_enabled_units
_systemctl_disabled_units
compadd "$@" -a - _sys_enabled_units _sys_disabled_units
}
done
# Completion functions for DISABLED_UNITS
(( $+functions[_systemctl_enable] )) || _systemctl_enable()
{
_systemctl_disabled_units
compadd "$@" -a - _sys_disabled_units
}
# Completion functions for FAILED_UNITS
(( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed()
{
_systemctl_failed_units
compadd "$@" -a - _sys_failed_units || _message "no failed unit found"
}
# Completion functions for STARTABLE_UNITS
(( $+functions[_systemctl_start] )) || _systemctl_start()
{
_systemctl_inactive_units
compadd "$@" -a - _sys_inactive_units
}
# Completion functions for STOPPABLE_UNITS
for fun in stop kill try-restart condrestart ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
_systemctl_active_units
compadd "$@" - $( _filter_units_by_property CanStop yes \
${_sys_active_units[*]} )
}
done
# Completion functions for ISOLATABLE_UNITS
(( $+functions[_systemctl_isolate] )) || _systemctl_isolate()
{
_systemctl_all_units
compadd "$@" - $( _filter_units_by_property AllowIsolate yes \
${_sys_all_units[*]} )
}
# Completion functions for RELOADABLE_UNITS
for fun in reload reload-or-try-restart force-reload ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
_systemctl_active_units
compadd "$@" - $( _filter_units_by_property CanReload yes \
${_sys_active_units[*]} )
}
done
# Completion functions for RESTARTABLE_UNITS
for fun in restart reload-or-restart ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
_systemctl_all_units
compadd "$@" - $( _filter_units_by_property CanStart yes \
${_sys_all_units[*]} | while read line; do \
[[ "$line" =~ \.device$ ]] || echo " $line"; \
done )
}
done
# Completion functions for MASKED_UNITS
(( $+functions[_systemctl_unmask] )) || _systemctl_unmask()
{
_systemctl_masked_units
compadd "$@" -a - _sys_masked_units || _message "no masked unit found"
}
# Completion functions for JOBS
(( $+functions[_systemctl_cancel] )) || _systemctl_cancel()
{
compadd "$@" - $(__systemctl list-jobs \
| cut -d' ' -f1 2>/dev/null ) || _message "no job found"
}
# Completion functions for SNAPSHOTS
(( $+functions[_systemctl_delete] )) || _systemctl_delete()
{
compadd "$@" - $(__systemctl list-units --type snapshot --all \
| cut -d' ' -f1 2>/dev/null ) || _message "no snapshot found"
}
# Completion functions for ENVS
for fun in set-environment unset-environment ; do
(( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
{
local fun=$0 ; fun=${fun##_systemctl_}
local suf
if [[ "${fun}" = "set-environment" ]]; then
suf='-S='
fi
compadd "$@" ${suf} - $(systemctl show-environment \
| while read line; do echo " ${line%%\=}";done )
}
done
(( $+functions[_systemctl_link] )) || _systemctl_link() { _files }
# no systemctl completion for:
# [STANDALONE]='daemon-reexec daemon-reload default dump
# emergency exit halt kexec list-jobs list-units
# list-unit-files poweroff reboot rescue show-environment'
# [NAME]='snapshot load'
_systemctl_caching_policy()
{
local _sysunits
local -a oldcache
# rebuild if cache is more than a day old
oldcache=( "$1"(mh+1) )
(( $#oldcache )) && return 0
_sysunits=($(__systemctl --all | cut -d' ' -f1))
if (( $#_sysunits )); then
for unit in $_sysunits; do
[[ "$unit" -nt "$1" ]] && return 0
done
fi
return 1
}
_list_fields() {
local -a journal_fields
journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC}
ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID}
_{P,U,G}ID _COMM _EXE _CMDLINE
_AUDIT_{SESSION,LOGINUID}
_SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID}
_SYSTEMD_USER_UNIT
_SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
_{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT
_KERNEL_{DEVICE,SUBSYSTEM}
_UDEV_{SYSNAME,DEVNODE,DEVLINK}
__CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP)
_describe 'possible fields' journal_fields
}
_journal_none() {
local -a _commands _files
_commands=( ${(f)"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} )
_alternative : \
'files:/dev files:_files -W /dev -P /dev/' \
"commands:commands:($_commands[@])" \
'fields:fields:_list_fields'
}
_journal_fields() {
local -a _fields cmd
cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" )
_fields=( ${(f)"$(_call_program fields $cmd[@])"} )
typeset -U _fields
_describe 'possible values' _fields
}
_loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo " $a"; done; }) )}
_loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo " $a"; done; }) )}
_loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo " $a"; done; }) )}
# Completion functions for SESSIONS
for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do
(( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
{
_loginctl_all_sessions
compadd "$@" -a - _sys_all_sessions
}
done
# Completion functions for USERS
for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do
(( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
{
_loginctl_all_users
compadd "$@" -a - _sys_all_users
}
done
# Completion functions for SEATS
(( $+functions[_loginctl_seats] )) || _loginctl_seats()
{
_loginctl_all_seats
compadd "$@" -a - _sys_all_seats
}
for fun in seat-status show-seat terminate-seat ; do
(( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
{ _loginctl_seats }
done
# Completion functions for ATTACH
(( $+functions[_loginctl_attach] )) || _loginctl_attach()
{
_loginctl_all_seats
_arguments -w -C -S -s \
':seat:_loginctl_seats' \
'*:device:_files'
}
# no loginctl completion for:
# [STANDALONE]='list-sessions list-users list-seats flush-devices'
(( $+functions[_loginctl_command] )) || _loginctl_command()
{
local -a _loginctl_cmds
_loginctl_cmds=(
"list-sessions:List sessions"
"session-status:Show session status"
"show-session:Show properties of one or more sessions"
"activate:Activate a session"
"lock-session:Screen lock one or more sessions"
"unlock-session:Screen unlock one or more sessions"
"terminate-session:Terminate one or more sessions"
"kill-session:Send signal to processes of a session"
"list-users:List users"
"user-status:Show user status"
"show-user:Show properties of one or more users"
"enable-linger:Enable linger state of one or more users"
"disable-linger:Disable linger state of one or more users"
"terminate-user:Terminate all sessions of one or more users"
"kill-user:Send signal to processes of a user"
"list-seats:List seats"
"seat-status:Show seat status"
"show-seat:Show properties of one or more seats"
"attach:Attach one or more devices to a seat"
"flush-devices:Flush all device associations"
"terminate-seat:Terminate all sessions on one or more seats"
)
if (( CURRENT == 1 )); then
_describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@"
else
local curcontext="$curcontext"
cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}"
if (( $#cmd )); then
curcontext="${curcontext%:*:*}:loginctl-${cmd}:"
_call_function ret _loginctl_$cmd || _message 'no more arguments'
else
_message "unknown loginctl command: $words[1]"
fi
return ret
fi
}
_hostnamectl_command() {
local -a _hostnamectl_cmds
_hostnamectl_cmds=(
"status:Show current hostname settings"
"set-hostname:Set system hostname"
"set-icon-name:Set icon name for host"
)
if (( CURRENT == 1 )); then
_describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@"
else
local curcontext="$curcontext"
cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"
if (( $#cmd )); then
[[ $cmd == status ]] && msg="no options" || msg="options for $cmd"
_message "$msg"
else
_message "unknown hostnamectl command: $words[1]"
fi
fi
}
_localectl_set-locale() {
local -a _confs _locales
local expl suf
_locales=( ${(f)"$(_call_program locales "$service" list-locales)"} )
_confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} )
if [[ -prefix 1 *\= ]]; then
local conf=${PREFIX%%\=*}
compset -P1 '*='
_wanted locales expl "locales configs" \
_combination localeconfs confs=$conf locales "$@" -
else
compadd -S '=' $_confs
fi
}
_localectl_set-keymap() {
local -a _keymaps
_keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )
if (( CURRENT <= 3 )); then
_describe keymaps _keymaps
else
_message "no more options"
fi
}
_localectl_set-x11-keymap() {
if (( $+commands[pkg-config] )); then
local -a _file _layout _model _variant _options
local _xorg_lst
_xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}
_file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )
_layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} )
_model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} )
_variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} )
_options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} )
#_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} )
#_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} )
#_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} )
#_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} )
case $CURRENT in
2) _describe layouts _layout ;;
3) _describe models _model;;
4) _describe variants _variant;;
5) _describe options _options;;
*) _message "no more options"
esac
fi
}
_localectl_command() {
local -a _localectl_cmds
_localectl_cmds=(
'status:Show current locale settings'
'set-locale:Set system locale'
'list-locales:Show known locales'
'set-keymap:Set virtual console keyboard mapping'
'list-keymaps:Show known virtual console keyboard mappings'
'set-x11-keymap:Set X11 keyboard mapping'
)
if (( CURRENT == 1 )); then
_describe -t commands 'localectl command' _localectl_cmds
else
local curcontext="$curcontext"
cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"
if (( $+functions[_localectl_$cmd] )); then
_localectl_$cmd
else
_message "no more options"
fi
fi
}
_timedatectl_set-timezone(){
local -a _timezones
_timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )
compadd "$_timezones[@]"
}
_timedatectl_set-time(){
_message "YYYY-MM-DD HH:MM:SS"
}
_timedatectl_set-local-rtc(){
local -a _options
_options=(
'0:Maintain RTC in universal time'
'1:Maintain RTC in local time'
)
_describe options _options
}
_timedatectl_set-ntp(){
local -a _options
_options=(
'0:Disable NTP based network time configuration'
'1:Enable NTP based network time configuration'
)
_describe options _options
}
_timedatectl_command(){
local -a _timedatectl_cmds
_timedatectl_cmds=(
'status:Show current time settings'
'set-time:Set system time'
'set-timezone:Set system timezone'
'list-timezones:Show known timezones'
'set-local-rtc:Control whether RTC is in local time'
'set-ntp:Control whether NTP is enabled'
)
if (( CURRENT == 1 )); then
_describe -t commands 'timedatectl command' _timedatectl_cmds
else
local curcontext="$curcontext"
cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"
if (( $#cmd )); then
if (( $+functions[_timedatectl_$cmd] )); then
_timedatectl_$cmd
else
_message "no more options"
fi
else
_message "unknown timedatectl command: $words[1]"
fi
fi
}
_systemd-coredumpctl_command(){
local -a _systemd_coredumpctl_cmds
_systemd_coredumpctl_cmds=(
'list:List available coredumps'
'dump:Print coredump to std'
)
if (( CURRENT == 1 )); then
_describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds
else
local curcontext="$curcontext"
local -a _dumps
cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
if (( $#cmd )); then
# user can set zstyle ':completion:*:*:systemd-coredumpctl:*' sort no for coredumps to be ordered by date, otherwise they get ordered by pid
_dumps=( "${(foa)$(systemd-coredumpctl list | awk 'BEGIN{OFS=":"} /^\s/ {sub(/[[ \t]+/, ""); print $5,$0}' 2>/dev/null)}" )
if [[ -n "$_dumps" ]]; then
_describe -t pids 'coredumps' _dumps
else
_message "no coredumps"
fi
else
_message "no more options"
fi
fi
}
(( $+functions[_machinectl_command] )) || _machinectl_command()
{
local -a _machinectl_cmds
_machinectl_cmds=(
"list:List currently running VMs/containers"
"status:Show VM/container status"
"show:Show properties of one or more VMs/containers"
"terminate:Terminate one or more VMs/containers"
"kill:Send signal to process or a VM/container"
)
if (( CURRENT == 1 )); then
_describe -t commands 'machinectl command' _machinectl_cmds || compadd "$@"
else
local curcontext="$curcontext"
cmd="${${_machinectl_cmds[(r)$words[1]:*]%%:*}}"
if (( $#cmd )); then
case $cmd in
list) msg="no options" ;;
*)
_machines=( "${(foa)$(machinectl list | awk '{print $1}')}" )
if [[ -n "$_machines" ]]; then
_describe 'machines' _machines
else
_message 'no machines'
fi
esac
else
_message "no more options"
fi
fi
}
_udevadm_info(){
_arguments \
'--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
'--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
'--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
'--root[Print absolute paths in name or symlink query.]' \
'--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
'--export[Print output as key/value pairs.]' \
'--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
'--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
'--export-db[Export the content of the udev database.]' \
'--cleanup-db[Cleanup the udev database.]'
}
_udevadm_trigger(){
_arguments \
'--verbose[Print the list of devices which will be triggered.]' \
'--dry-run[Do not actually trigger the event.]' \
'--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
'--action=[Type of event to be triggered.]:actions:(add change remove)' \
'--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
'--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
'--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
'--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
'--property-match=[Trigger events for devices with a matching property value.]' \
'--tag-match=property[Trigger events for devices with a matching tag.]' \
'--sysname-match=[Trigger events for devices with a matching sys device name.]' \
'--parent-match=[Trigger events for all children of a given device.]'
}
_udevadm_settle(){
_arguments \
'--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
'--seq-start=[Wait only for events after the given sequence number.]' \
'--seq-end=[Wait only for events before the given sequence number.]' \
'--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
'--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
'--help[Print help text.]'
}
_udevadm_control(){
_arguments \
'--exit[Signal and wait for systemd-udevd to exit.]' \
'--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
'--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
'--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
'--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
'--property=[Set a global property for all events.]' \
'--children-max=[Set the maximum number of events.]' \
'--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
'--help[Print help text.]'
}
_udevadm_monitor(){
_arguments \
'--kernel[Print the kernel uevents.]' \
'--udev[Print the udev event after the rule processing.]' \
'--property[Also print the properties of the event.]' \
'--subsystem-match=[Filter events by subsystem/\[devtype\].]' \
'--tag-match=[Filter events by property.]' \
'--help[Print help text.]'
}
_udevadm_test(){
_arguments \
'--action=[The action string.]:actions:(add change remove)' \
'--subsystem=[The subsystem string.]' \
'--help[Print help text.]' \
'*::devpath:_files -P /sys/ -W /sys'
}
_udevadm_test-builtin(){
if (( CURRENT == 2 )); then
_arguments \
'--help[Print help text]' \
'*::builtins:(blkid btrfs hwdb input_id kmod path_id usb_id uaccess)'
elif (( CURRENT == 3 )); then
_arguments \
'--help[Print help text]' \
'*::syspath:_files -P /sys -W /sys'
else
_arguments \
'--help[Print help text]'
fi
}
_udevadm_mounts(){
local dev_tmp dpath_tmp mp_tmp mline
tmp=( "${(@f)$(< /etc/mtab)}" )
dev_tmp=( "${(@)${(@)tmp%% *}:#none}" )
mp_tmp=( "${(@)${(@)tmp#* }%% *}" )
local MATCH
mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")
dpath_tmp=( "${(@Mq)dev_tmp:#/*}" )
dev_tmp=( "${(@q)dev_tmp:#/*}" )
_alternative \
'device-paths: device path:compadd -a dpath_tmp' \
'directories:mount point:compadd -a mp_tmp'
}
_udevadm_command(){
local -a _udevadm_cmds
_udevadm_cmds=(
'info:query sysfs or the udev database'
'trigger:request events from the kernel'
'settle:wait for the event queue to finish'
'control:control the udev daemon'
'monitor:listen to kernel and udev events'
'test:test an event run'
'test-builtin:test a built-in command'
)
if ((CURRENT == 1)); then
_describe -t commands 'udevadm commands' _udevadm_cmds
else
local curcontext="$curcontext"
cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"
if (($#cmd)); then
if (( $+functions[_udevadm_$cmd] )); then
_udevadm_$cmd
else
_message "no options for $cmd"
fi
else
_message "no more options"
fi
fi
}
_ctls "$@"
#vim: set ft=zsh sw=4 ts=4 et
Mini Shell