GIF89a;
Mini Shell
Mini Shell
#compdef ipadm
# Synced with the S11U1 build 19 man page
_ipadm_ifs() {
local -a extra
zparseopts -D -E -a extra /+:
compadd "$@" - $(ipadm show-if -p -o ifname) $extra[2,-1]
}
_ipadm_enabled_ifs() {
# Interfaces not marked "disabled"
compadd "$@" - "${(@)${(@)${(f)$(ipadm show-if -p -o state,ifname)}:#disabled:*}#*:}"
}
_ipadm_disabled_ifs() {
compadd "$@" - "${(@)${(@)${(f)$(ipadm show-if -p -o state,ifname)}#disabled:*}:#*:*}"
}
_ipadm_vnis() {
compadd "$@" - "${(@)${(@)${(f)$(ipadm show-if -p -o class,ifname)}#vni:*}:#*:*}"
}
_ipadm_ipmps() {
compadd "$@" - "${(@)${(@)${(f)$(ipadm show-if -p -o class,ifname)}#ipmp:*}:#*:*}"
}
_ipadm_get_possible_values() {
local -a proto poss
local cmd
cmd=${${(M)words:#set-*}/set/show}
if [[ $cmd == "show-prop" ]]; then
# You have to specify a protocol for show-prop if you specify a
# property, so we loop through them all.
poss=()
for proto in ipv4 ipv6 icmp tcp udp sctp; do
poss=( $poss ${(u)=$(ipadm $cmd -c -p ${IPREFIX%=} -o possible $proto 2> /dev/null)//,/ } )
done
poss=( ${(u)poss:#\?} )
else
proto=${=opt_args[-m]:+-m $opt_args[-m]}
poss=( ${(u)=$(ipadm $cmd -c -p ${IPREFIX%=} $proto -o possible)//,/ } )
fi
if [[ $poss[1] == [0-9]##-[0-9]## ]]; then
if (( $#poss > 1 )); then
_message -e "number in ranges ${(j:, :)poss}"
else
_message -e "number in range $poss"
fi
elif [[ -z $poss[1] ]]; then
_message -e "value"
else
compadd "$@" - $poss
fi
}
_ipadm_addrobjs() {
compadd "$@" - $(ipadm show-addr -p -o addrobj)
}
_ipadm_addrobjs_or_ifs() {
compadd "$@" - $(ipadm show-addr -p -o addrobj) \
$(ipadm show-if -p -o ifname)
}
_ipadm_protos() {
compadd "$@" - $(ipadm show-prop -c -o proto)
}
_ipadm() {
local context state line expl
local -A opt_args
local -a subcmds
local -a if_properties if_propproperties if_properties2
local -a addr_properties addr_propproperties
local -a addrobj_properties
local -a proto_ipv4_properties proto_ipv6_properties proto_tcp_properties
local -a proto_udp_properties proto_sctp_properties proto_icmp_properties
local -a proto_all_properties proto_propproperties
subcmds=(
"help"
{"show","disable","enable"}"-if"
{"create","delete"}"-ip"
{"create","delete"}"-vni"
{"create","delete","add","remove"}"-ipmp"
{"set","reset","show"}"-ifprop"
{"create","delete","show","up","down","refresh","disable","enable"}"-addr"
{"set","reset","show"}"-addrprop"
{"set","reset","show"}"-prop"
)
if_properties=( "ifname" "class" "state" "active" "current" "persistent" "over" )
if_propproperties=( "ifname" "property" "proto" "perm" "current" "persistent" "default" "possible" )
if_properties2=(
"arp:value:_ipadm_get_possible_values"
"forwarding:value:_ipadm_get_possible_values"
"metric:value:_ipadm_get_possible_values"
"mtu:value:_ipadm_get_possible_values"
"nud:value:_ipadm_get_possible_values"
"usesrc:value:_ipadm_ifs -/ none"
"exchange_routes:value:_ipadm_get_possible_values"
"group:value:_ipadm_get_possible_values"
"standby:value:_ipadm_get_possible_values"
)
addr_properties=(
"broadcast:value:_ipadm_get_possible_values"
"deprecated:value:_ipadm_get_possible_values"
"prefixlen:value:_ipadm_get_possible_values"
"private:value:_ipadm_get_possible_values"
"reqhost:value:_ipadm_get_possible_values"
"transmit:value:_ipadm_get_possible_values"
"zone:value:_zones -t c"
)
addr_propproperties=( "addrobj" "property" "perm" "current" "persistent" "default" "possible" )
addrobj_properties=(
"addrobj" "type" "state" "current" "persistent" "addr"
"cid-type" "cid-value" "begin" "expire" "renew"
)
proto_ipv4_properties=( "hostmodel" "ttl" "forwarding" )
proto_ipv6_properties=( "hostmodel" "hoplimit" "forwarding" )
proto_tcp_properties=( "cong_default" "cong_enabled" "ecn" "extra_priv_ports" "max_buf" "recv_buf"
"send_buf" "sack" "smallest_anon_port" "largest_anon_port" "smallest_nonpriv_port" )
proto_udp_properties=( "extra_priv_ports" "max_buf" "recv_buf" "send_buf" "smallest_anon_port"
"largest_anon_port" "smallest_nonpriv_port" )
proto_sctp_properties=( "cong_default" "cong_enabled" "extra_priv_ports" "max_buf" "recv_buf"
"send_buf" "smallest_anon_port" "largest_anon_port" "smallest_nonpriv_port" )
proto_icmp_properties=( "max_buf" "recv_buf" "send_buf" )
proto_all_properties=( $proto_ipv4_properties $proto_ipv6_properties $proto_tcp_properties
$proto_udp_properties $proto_sctp_properties $proto_icmp_properties )
proto_all_properties=( $^proto_all_properties:value:_ipadm_get_possible_values )
proto_propproperties=( "proto" "property" "perm" "current" "persistent" "default" "possible" )
if [[ $service == "ipadm" ]]; then
_arguments -C -A "-*" \
'-\?[Help]' \
'*::command:->subcmd' && return 0
if (( CURRENT == 1 )); then
_wanted commands expl "ipadm subcommand" compadd -a subcmds
return
fi
service="$words[1]"
curcontext="${curcontext%:*}=$service:"
fi
case $service in
("help")
_arguments ':subcommand:($subcmds)'
;;
("create-ip")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Interface should be temporary]' \
':interface name:'
;;
("delete-ip")
_arguments -A "-*" \
':interface name:_ipadm_ifs'
;;
("create-vni")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Interface should be temporary]' \
':VNI name:'
;;
("delete-vni")
_arguments -A "-*" \
':VNI name:_ipadm_vnis'
;;
("create-ipmp")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Interface should be temporary]' \
'(-i --interface)'{-i,--interface}'[List of underlying interfaces]:interface name:_values -s , "interface" $(ipadm show-if -p -o ifname)' \
':IPMP interface name:'
;;
("delete-ipmp")
_arguments -A "-*" \
'(-f --force)'{-f,--force}'[First remove all underlying interfaces from group]' \
':IPMP interface name:_ipadm_ipmps'
;;
("add-ipmp")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Interface should be temporary]' \
'(-i --interface)'{-i,--interface}'[List of underlying interfaces]:interface name:_values -s , "interface" $(ipadm show-if -p -o ifname)' \
':IPMP interface name:_ipadm_ipmps'
;;
("remove-ipmp")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Interface should be temporary]' \
'(-i --interface)'{-i,--interface}'[List of underlying interfaces]:interface name:_values -s , "interface" $(ipadm show-if -p -o ifname)' \
':IPMP interface name:_ipadm_ipmps'
;;
("show-if")
_arguments -A "-*" \
'(-p --parseable)'{-p,--parseable}'[Parseable output]' \
'(-o --output)'{-o,--output}'[Properties to display]:property:_values -s , "property" $if_properties' \
':interface name:_ipadm_ifs'
;;
("disable-if")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
':interface name:_ipadm_enabled_ifs'
;;
("enable-if")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
':interface name:_ipadm_disabled_ifs'
;;
("set-ifprop")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
'(-m --module)'{-m,--module}'[Protocol]:protocol:(ipv4 ipv6)' \
'(-p --prop)'{-p,--prop}'[Property to set]:property:_values -s , "property" $if_properties2' \
':interface name:_ipadm_ifs'
;;
("reset-ifprop")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
'(-m --module)'{-m,--module}'[Protocol]:protocol:(ipv4 ipv6)' \
'(-p --prop)'{-p,--prop}'[Property to reset]:property:($if_properties2)' \
':interface name:_ipadm_ifs'
;;
("show-ifprop")
_arguments -A "-*" \
'(-c --parseable)'{-c,--parseable}'[Parseable output]' \
'(-m --module)'{-m,--module}'[Protocol]:protocol:(ipv4 ipv6)' \
'(-o --output)'{-o,--output}'[Property properties to display]:property:_values -s , "property" $if_propproperties' \
'(-p --prop)'{-p,--prop}'[Interface properties to display]:property:_values -s , "property" ${if_properties2%%\:*}' \
':interface name:_ipadm_ifs'
;;
("create-addr")
# This causes all options and arguments following -T to be
# stuck into $opt_args[-T]. It feels hacky, but it seems
# to do the trick.
# XXX When -T is static, it's not necessary.
_arguments -C -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Address should be temporary]' \
'-T[Address type]:*::address type:->newaddr'
if [[ $state == "newaddr" ]]; then
case ${opt_args[-T]#-T:} in
("static:"*)
local -a addrthingsv4
addrthingsv4=( "local:address: " "remote:address: ")
_arguments -A "-*" \
'(-d --down)'{-d,--down}'[Address should be marked down]' \
'(-a --address)'{-a,--address}'[Address specification]:address:_values -s , "address" $addrthingsv4' \
':address object name:_ipadm_addrobjs_or_ifs'
;;
("dhcp:"*)
_arguments -A "-*" \
'(-w --wait)'{-w,--wait}'[Seconds to wait for completion]:number or "forever":{if [[ -prefix [0-9]## ]]; then _message -e "number of seconds"; else _wanted forever expl "number or \"forever\"" compadd forever; fi}' \
'-h[Request a specific hostname]:hostname:' \
':address object name:_ipadm_addrobjs_or_ifs'
;;
("addrconf:"*)
local -a addrthingsv6 statefulness
addrthingsv6=( "local:interface id: " "remote:interface id: ")
statefulness=( "stateful:statefulness:(yes no)" "stateless:statelessness:(yes no)" )
_arguments -A "-*" \
'(-i --interface-id)'{-i,--interface-id}'[Interface ID]:address:_values -s , "interface id" $addrthingsv6' \
'(-p --prop)'{-p,--prop}'[Statefulness configuration]:statefulness configuration:_values -s , "statefulness" $statefulness' \
':address object name:_ipadm_addrobjs_or_ifs'
;;
(*)
_wanted commands expl "address type" compadd static dhcp addrconf
;;
esac
fi
;;
("delete-addr")
_arguments -A "-*" \
'(-r --release)'{-r,--release}'[Release DHCP-acquired address]' \
':address object name:_ipadm_addrobjs'
;;
("show-addr")
_arguments -A "-*" \
'(-d --dhcp -p --parseable)'{-d,--dhcp}'[Display DHCP status fields]' \
'(-p --parseable -d --dhcp)'{-p,--parseable}'[Parseable output]' \
'(-o --output)'{-o,--output}'[Properties to display]:property:_values -s , "property" $addrobj_properties' \
':address object name:_ipadm_addrobjs_or_ifs'
;;
({"up","down","disable","enable"}"-addr")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
':address object name:_ipadm_addrobjs'
;;
("refresh-addr")
_arguments -A "-*" \
'(-i --inform)'{-i,--inform}'[Retrieve DHCP parameters]' \
':address object name:_ipadm_addrobjs'
;;
("set-addrprop")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
'(-p --prop)'{-p,--prop}'[Property to set]:property:_values -s , "property" $addr_properties' \
':address object name:_ipadm_addrobjs'
;;
("reset-addrprop")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
'(-p --prop)'{-p,--prop}'[Property to reset]:property:(${addr_properties%%\:*})' \
':address object name:_ipadm_addrobjs'
;;
("show-addrprop")
_arguments -A "-*" \
'(-c --parseable)'{-c,--parseable}'[Parseable output]' \
'(-o --output)'{-o,--output}'[Property properties to display]:property:_values -s , "property" $addr_propproperties' \
'(-p --prop)'{-p,--prop}'[Address object properties to display]:property:_values -s , "property" ${addr_properties%%\:*}' \
':address object name:_ipadm_addrobjs_or_ifs'
;;
("set-prop")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
'(-p --prop)'{-p,--prop}'[Property to set]:property:_values -s , "property" $proto_all_properties' \
':protocol name:_ipadm_protos'
;;
("reset-prop")
_arguments -A "-*" \
'(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
'(-p --prop)'{-p,--prop}'[Property to reset]:property:(${proto_all_properties%%\:*})' \
':protocol name:_ipadm_protos'
;;
("show-prop")
_arguments -A "-*" \
'(-c --parseable)'{-c,--parseable}'[Parseable output]' \
'(-o --output)'{-o,--output}'[Property properties to display]:property:_values -s , "property" $proto_propproperties' \
'(-p --prop)'{-p,--prop}'[Protocol properties to display]:property:_values -s , "property" ${proto_all_properties%%\:*}' \
':protocol name:_ipadm_protos'
;;
(*)
_message "unknown ipadm subcommand: $service"
;;
esac
}
_ipadm "$@"
./BlackJoker Mini Shell 1.0