Current File : //usr/share/perl5/vendor_perl/CPANPLUS/Shell/Default.pm
package CPANPLUS::Shell::Default;
use strict;
use CPANPLUS::Error;
use CPANPLUS::Backend;
use CPANPLUS::Configure::Setup;
use CPANPLUS::Internals::Constants;
use CPANPLUS::Internals::Constants::Report qw[GRADE_FAIL];
use Cwd;
use IPC::Cmd;
use Term::UI;
use Data::Dumper;
use Term::ReadLine;
use Module::Load qw[load];
use Params::Check qw[check];
use Module::Load::Conditional qw[can_load check_install];
use Locale::Maketext::Simple Class => 'CPANPLUS', Style => 'gettext';
local $Params::Check::VERBOSE = 1;
local $Data::Dumper::Indent = 1; # for dumpering from !
BEGIN {
use vars qw[ $VERSION @ISA ];
@ISA = qw[ CPANPLUS::Shell::_Base::ReadLine ];
$VERSION = "0.9138";
}
load CPANPLUS::Shell;
my $map = {
'm' => '_search_module',
'a' => '_search_author',
'!' => '_bang',
'?' => '_help',
'h' => '_help',
'q' => '_quit',
'r' => '_readme',
'v' => '_show_banner',
'w' => '__display_results',
'd' => '_fetch',
'z' => '_shell',
'f' => '_distributions',
'x' => '_reload_indices',
'i' => '_install',
't' => '_install',
'l' => '_details',
'p' => '_print',
's' => '_set_conf',
'o' => '_uptodate',
'b' => '_autobundle',
'u' => '_uninstall',
'/' => '_meta', # undocumented for now
'c' => '_reports',
'e' => '_reload_shell',
};
### free letters: e g j k n y ###
### will be filled if you have a .default-shell.rc and
### Config::Auto installed
my $rc = {};
### the shell object, scoped to the file ###
my $Shell;
my $Brand = loc('CPAN Terminal');
my $Prompt = $Brand . '> ';
=pod
=head1 NAME
CPANPLUS::Shell::Default - the default CPANPLUS shell
=head1 SYNOPSIS
### loading the shell:
$ cpanp # run 'cpanp' from the command line
$ perl -MCPANPLUS -eshell # load the shell from the command line
use CPANPLUS::Shell qw[Default]; # load this shell via the API
# always done via CPANPLUS::Shell
my $ui = CPANPLUS::Shell->new;
$ui->shell; # run the shell
$ui->dispatch_on_input( input => 'x'); # update the source using the
# dispatch method
### when in the shell:
### Note that all commands can also take options.
### Look at their underlying CPANPLUS::Backend methods to see
### what options those are.
cpanp> h # show help messages
cpanp> ? # show help messages
cpanp> m Acme # find acme modules, allows regexes
cpanp> a KANE # find modules by kane, allows regexes
cpanp> f Acme::Foo # get a list of all releases of Acme::Foo
cpanp> i Acme::Foo # install Acme::Foo
cpanp> i Acme-Foo-1.3 # install version 1.3 of Acme::Foo
cpanp> i <URI> # install from URI, like ftp://foo.com/X.tgz
cpanp> i <DIR> # install from an absolute or relative directory
cpanp> i 1 3..5 # install search results 1, 3, 4 and 5
cpanp> i * # install all search results
cpanp> a KANE; i *; # find modules by kane, install all results
cpanp> t Acme::Foo # test Acme::Foo, without installing it
cpanp> u Acme::Foo # uninstall Acme::Foo
cpanp> d Acme::Foo # download Acme::Foo
cpanp> z Acme::Foo # download & extract Acme::Foo, then open a
# shell in the extraction directory
cpanp> c Acme::Foo # get a list of test results for Acme::Foo
cpanp> l Acme::Foo # view details about the Acme::Foo package
cpanp> r Acme::Foo # view Acme::Foo's README file
cpanp> o # get a list of all installed modules that
# are out of date
cpanp> o 1..3 # list uptodateness from a previous search
cpanp> s conf # show config settings
cpanp> s conf md5 1 # enable md5 checks
cpanp> s program # show program settings
cpanp> s edit # edit config file
cpanp> s reconfigure # go through initial configuration again
cpanp> s selfupdate # update your CPANPLUS install
cpanp> s save # save config to disk
cpanp> s mirrors # show currently selected mirrors
cpanp> ! [PERL CODE] # execute the following perl code
cpanp> b # create an autobundle for this computers
# perl installation
cpanp> x # reload index files (purges cache)
cpanp> x --update_source # reload index files, get fresh source files
cpanp> p [FILE] # print error stack (to a file)
cpanp> v # show the banner
cpanp> w # show last search results again
cpanp> q # quit the shell
cpanp> e # exit the shell and reload
cpanp> /plugins # list available plugins
cpanp> /? PLUGIN # list help test of <PLUGIN>
### common options:
cpanp> i ... --skiptest # skip tests
cpanp> i ... --force # force all operations
cpanp> i ... --verbose # run in verbose mode
=head1 DESCRIPTION
This module provides the default user interface to C<CPANPLUS>. You
can start it via the C<cpanp> binary, or as detailed in the L<SYNOPSIS>.
=cut
sub new {
my $class = shift;
my $cb = CPANPLUS::Backend->new( @_ );
my $self = $class->SUPER::_init(
brand => $Brand,
term => Term::ReadLine->new( $Brand ),
prompt => $Prompt,
backend => $cb,
format => "%4s %-55s %8s %-10s\n",
dist_format => "%4s %-42s %-12s %8s %-10s\n",
);
### make it available package wide ###
$Shell = $self;
my $rc_file = File::Spec->catfile(
$cb->configure_object->get_conf('base'),
DOT_SHELL_DEFAULT_RC,
);
if( -e $rc_file && -r _ ) {
$rc = $self->_read_configuration_from_rc( $rc_file );
}
### register install callback ###
$cb->_register_callback(
name => 'install_prerequisite',
code => \&__ask_about_install,
);
### execute any login commands specified ###
$self->dispatch_on_input( input => $rc->{'login'} )
if defined $rc->{'login'};
### register test report callbacks ###
$cb->_register_callback(
name => 'edit_test_report',
code => \&__ask_about_edit_test_report,
);
$cb->_register_callback(
name => 'send_test_report',
code => \&__ask_about_send_test_report,
);
$cb->_register_callback(
name => 'proceed_on_test_failure',
code => \&__ask_about_test_failure,
);
### load all the plugins
$self->_plugins_init;
if (my $histfile = $cb->configure_object->get_conf( 'histfile' )) {
my $term = $self->term;
if ($term->can('AddHistory')) {
if (open my $fh, '<', $histfile) {
local $/ = "\n";
while (my $line = <$fh>) {
chomp($line);
$term->AddHistory($line);
}
close($fh);
}
}
}
return $self;
}
sub shell {
my $self = shift;
my $term = $self->term;
my $conf = $self->backend->configure_object;
$self->_show_banner;
$self->__print( "*** Type 'p' now to show start up log\n" ); # XXX add to banner?
$self->_show_random_tip if $conf->get_conf('show_startup_tip');
$self->_input_loop && $self->__print( "\n" );
$self->_quit;
}
sub _input_loop {
my $self = shift;
my $term = $self->term;
my $cb = $self->backend;
my $normal_quit = 0;
while (
defined (my $input = eval { $term->readline($self->prompt) } )
or $self->_signals->{INT}{count} == 1
) {
### re-initiate all signal handlers
while (my ($sig, $entry) = each %{$self->_signals} ) {
$SIG{$sig} = $entry->{handler} if exists($entry->{handler});
}
$self->__print( "\n" );
last if $self->dispatch_on_input( input => $input );
### flush the lib cache ###
$cb->_flush( list => [qw|lib load|] );
} continue {
### clear the sigint count
$self->_signals->{INT}{count}--
if $self->_signals->{INT}{count};
### reset the 'install prereq?' cached answer
$self->settings->{'install_all_prereqs'} = undef;
}
return 1;
}
### return 1 to quit ###
sub dispatch_on_input {
my $self = shift;
my $conf = $self->backend->configure_object();
my $term = $self->term;
my %hash = @_;
my($string, $noninteractive);
my $tmpl = {
input => { required => 1, store => \$string },
noninteractive => { required => 0, store => \$noninteractive },
};
check( $tmpl, \%hash ) or return;
### indicates whether or not the user will receive a shell
### prompt after the command has finished.
$self->noninteractive($noninteractive) if defined $noninteractive;
my $rv = 1;
my @cmds = split ';', $string;
while( my $input = shift @cmds ) {
### to send over the socket ###
my $org_input = $input;
my $key; my $options;
{ ### make whitespace not count when using special chars
{ $input =~ s|^\s*([!?/])|$1 |; }
### get the first letter of the input
$input =~ s|^\s*([\w\?\!/])\w*||;
chomp $input;
$key = lc($1);
### we figured out what the command was...
### if we have more input, that DOES NOT start with a white
### space char, we misparsed.. like 'Test::Foo::Bar', which
### would turn into 't', '::Foo::Bar'...
if( $input and $input !~ s/^\s+// ) {
$self->__print( loc("Could not understand command: %1\n".
"Possibly missing command before argument(s)?\n",
$org_input) );
return;
}
### allow overrides from the config file ###
if( defined $rc->{$key} ) {
$input = $rc->{$key} . $input;
}
### grab command line options like --no-force and --verbose ###
($options,$input) = $term->parse_options($input)
unless $key eq '!';
}
### emtpy line? ###
return unless $key;
### time to quit ###
return 1 if $key eq 'q';
my $method = $map->{$key};
### dispatch meta locally at all times ###
if( $key eq '/' ) {
### keep track of failures
$rv *= length $self->$method(input => $input, options => $options);
next;
}
### flush unless we're trying to print the stack
CPANPLUS::Error->flush unless $key eq 'p';
### connected over a socket? ###
if( $self->remote ) {
### unsupported commands ###
if( $key eq 'z' or
($key eq 's' and $input =~ /^\s*edit/)
) {
$self->__print( "\n",
loc( "Command '%1' not supported over remote connection",
join ' ', $key, $input
), "\n\n" );
} else {
my($status,$buff) = $self->__send_remote_command($org_input);
$self->__print( "\n", loc("Command failed!"), "\n\n" )
unless $status;
### keep track of failures
$rv *= length $status;
$self->_pager_open if $buff =~ tr/\n// > $self->_term_rowcount;
$self->__print( $buff );
$self->_pager_close;
}
### or just a plain local shell? ###
} else {
unless( $self->can($method) ) {
$self->__print(loc("Unknown command '%1'. Usage:", $key), "\n");
$self->_help;
} else {
### some methods don't need modules ###
my @mods;
@mods = $self->_select_modules($input)
unless grep {$key eq $_} qw[! m a v w x p s b / ? h];
### keep track of failures
$rv *= defined eval { $self->$method(
modules => \@mods,
options => $options,
input => $input,
choice => $key )
};
error( $@ ) if $@;
}
}
}
### outside the shell loop, we can return the actual return value;
return $rv if $self->noninteractive;
return;
}
sub _select_modules {
my $self = shift;
my $input = shift or return;
my $cache = $self->cache;
my $cb = $self->backend;
### expand .. in $input
$input =~ s{\b(\d+)\s*\.\.\s*(\d+)\b}
{join(' ', ($1 < 1 ? 1 : $1) .. ($2 > $#{$cache} ? $#{$cache} : $2))}eg;
$input = join(' ', 1 .. $#{$cache}) if $input eq '*';
$input =~ s/'/::/g; # perl 4 convention
my @rv;
for my $mod (split /\s+/, $input) {
### it's a cache look up ###
if( $mod =~ /^\d+/ and $mod > 0 ) {
unless( scalar @$cache ) {
$self->__print( loc("No search was done yet!"), "\n" );
} elsif ( my $obj = $cache->[$mod] ) {
push @rv, $obj;
} else {
$self->__print( loc("No such module: %1", $mod), "\n" );
}
} else {
my $obj = $cb->parse_module( module => $mod );
unless( $obj ) {
$self->__print( loc("No such module: %1", $mod), "\n" );
} else {
push @rv, $obj;
}
}
}
unless( scalar @rv ) {
$self->__print( loc("No modules found to operate on!\n") );
return;
} else {
return @rv;
}
}
sub _format_version {
my $self = shift;
my $version = shift || 0;
### fudge $version into the 'optimal' format
$version = 0 if $version eq 'undef';
$version =~ s/_//g; # everything after gets stripped off otherwise
### allow 6 digits after the dot, as that's how perl stringifies
### x.y.z numbers.
$version = sprintf('%3.6f', $version);
$version = '' if $version == '0.00';
$version =~ s/(00{0,3})$/' ' x (length $1)/e;
return $version;
}
sub __display_results {
my $self = shift;
my $cache = $self->cache;
my @rv = @$cache;
if( scalar @rv ) {
$self->_pager_open if $#{$cache} >= $self->_term_rowcount;
my $i = 1;
for my $mod (@rv) {
next unless $mod; # first one is undef
# humans start counting at 1
### for dists only -- we have checksum info
if( $mod->mtime ) {
$self->__printf(
$self->dist_format,
$i,
$mod->module,
$mod->mtime,
$self->_format_version( $mod->version ),
$mod->author->cpanid
);
} else {
$self->__printf(
$self->format,
$i,
$mod->module,
$self->_format_version( $mod->version ),
$mod->author->cpanid
);
}
$i++;
}
$self->_pager_close;
} else {
$self->__print( loc("No results to display"), "\n" );
}
return 1;
}
sub _quit {
my $self = shift;
my $term = $self->term;
$self->dispatch_on_input( input => $rc->{'logout'} )
if defined $rc->{'logout'};
if ($term->can('GetHistory')) {
my @history = $term->GetHistory;
my $histfile = $self->backend->configure_object->get_conf('histfile');
if (open my $fh, '>', $histfile) {
foreach my $line (@history) {
print {$fh} "$line\n";
}
close($fh);
}
else {
warn "Cannot open history file '$histfile' - $!";
}
}
$self->__print( loc("Exiting CPANPLUS shell"), "\n" );
return 1;
}
###########################
### actual command subs ###
###########################
### print out the help message ###
### perhaps, '?' should be a slightly different version ###
{ my @help;
sub _help {
my $self = shift;
my %hash = @_;
my $input;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
input => { required => 0, store => \$input }
};
my $args = check( $tmpl, \%hash ) or return;
}
@help = (
loc('[General]' ),
loc(' h | ? # display help' ),
loc(' q # exit' ),
loc(' e # exit and reload' ),
loc(' v # version information' ),
loc('[Search]' ),
loc(' a AUTHOR ... # search by author(s)' ),
loc(' m MODULE ... # search by module(s)' ),
loc(' f MODULE ... # list all releases of a module' ),
loc(" o [ MODULE ... ] # list installed module(s) that aren't up to date" ),
loc(' w # display the result of your last search again' ),
loc('[Operations]' ),
loc(' i MODULE | NUMBER ... # install module(s), by name or by search number' ),
loc(' i URI | ... # install module(s), by URI (ie http://foo.com/X.tgz)' ),
loc(' i DIR | ... # install module(s), by path (ie ./Module-1.0)' ),
loc(' t MODULE | NUMBER ... # test module(s), by name or by search number' ),
loc(' u MODULE | NUMBER ... # uninstall module(s), by name or by search number' ),
loc(' d MODULE | NUMBER ... # download module(s)' ),
loc(' l MODULE | NUMBER ... # display detailed information about module(s)' ),
loc(' r MODULE | NUMBER ... # display README files of module(s)' ),
loc(' c MODULE | NUMBER ... # check for module report(s) from cpan-testers' ),
loc(' z MODULE | NUMBER ... # extract module(s) and open command prompt in it' ),
loc('[Local Administration]' ),
loc(' b # write a bundle file for your configuration' ),
loc(' s program [OPT VALUE] # set program locations for this session' ),
loc(' s conf [OPT VALUE] # set config options for this session' ),
loc(' s mirrors # show currently selected mirrors' ),
loc(' s reconfigure # reconfigure settings ' ),
loc(' s selfupdate # update your CPANPLUS install '),
loc(' s save [user|system] # save settings for this user or systemwide' ),
loc(' s edit [user|system] # open configuration file in editor and reload' ),
loc(' ! EXPR # evaluate a perl statement' ),
loc(' p [FILE] # print the error stack (optionally to a file)' ),
loc(' x # reload CPAN indices (purges cache)' ),
loc(' x --update_source # reload CPAN indices, get fresh source files' ),
loc('[Common Options]' ),
loc(' i ... --skiptest # skip tests' ),
loc(' i ... --force # force all operations' ),
loc(' i ... --verbose # run in verbose mode' ),
loc('[Plugins]' ),
loc(' /plugins # list available plugins' ),
loc(' /? [PLUGIN NAME] # show usage for (a particular) plugin(s)' ),
) unless @help;
$self->_pager_open if (@help >= $self->_term_rowcount);
### XXX: functional placeholder for actual 'detailed' help.
$self->__print( "Detailed help for the command '$input' is " .
"not available.\n\n" ) if length $input;
$self->__print( map {"$_\n"} @help );
$self->__print( $/ );
$self->_pager_close;
return 1;
}
}
### eval some code ###
sub _bang {
my $self = shift;
my $cb = $self->backend;
my %hash = @_;
my $input;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
input => { required => 1, store => \$input }
};
my $args = check( $tmpl, \%hash ) or return;
}
local $Data::Dumper::Indent = 1; # for dumpering from !
eval $input;
error( $@ ) if $@;
$self->__print( "\n" );
return if $@;
return 1;
}
sub _search_module {
my $self = shift;
my $cb = $self->backend;
my %hash = @_;
my $args;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
input => { required => 1, },
options => { default => { } },
};
$args = check( $tmpl, \%hash ) or return;
}
my @regexes = map { qr/$_/i } split /\s+/, $args->{'input'};
### XXX this is rather slow, because (probably)
### of the many method calls
### XXX need to profile to speed it up =/
### find the modules ###
my @rv = sort { $a->module cmp $b->module }
$cb->search(
%{$args->{'options'}},
type => 'module',
allow => \@regexes,
);
### store the result in the cache ###
$self->cache([undef,@rv]);
$self->__display_results;
return 1;
}
sub _search_author {
my $self = shift;
my $cb = $self->backend;
my %hash = @_;
my $args;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
input => { required => 1, },
options => { default => { } },
};
$args = check( $tmpl, \%hash ) or return;
}
my @regexes = map { qr/$_/i } split /\s+/, $args->{'input'};
my @rv;
for my $type (qw[author cpanid]) {
push @rv, $cb->search(
%{$args->{'options'}},
type => $type,
allow => \@regexes,
);
}
my %seen;
my @list = sort { $a->module cmp $b->module }
grep { defined }
map { $_->modules }
grep { not $seen{$_}++ } @rv;
$self->cache([undef,@list]);
$self->__display_results;
return 1;
}
sub _readme {
my $self = shift;
my $cb = $self->backend;
my %hash = @_;
my $args; my $mods; my $opts;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
modules => { required => 1, store => \$mods },
options => { default => { }, store => \$opts },
};
$args = check( $tmpl, \%hash ) or return;
}
return unless scalar @$mods;
$self->_pager_open;
for my $mod ( @$mods ) {
$self->__print( $mod->readme( %$opts ) );
}
$self->_pager_close;
return 1;
}
sub _fetch {
my $self = shift;
my $cb = $self->backend;
my %hash = @_;
my $args; my $mods; my $opts;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
modules => { required => 1, store => \$mods },
options => { default => { }, store => \$opts },
};
$args = check( $tmpl, \%hash ) or return;
}
$self->_pager_open if @$mods >= $self->_term_rowcount;
my $rv = 1;
for my $mod (@$mods) {
my $where = $mod->fetch( %$opts );
$rv *= length $where;
$self->__print(
$where
? loc("Successfully fetched '%1' to '%2'",
$mod->module, $where )
: loc("Failed to fetch '%1'", $mod->module)
);
$self->__print( "\n" );
}
$self->_pager_close;
return 1 if $rv;
return;
}
sub _shell {
my $self = shift;
my $cb = $self->backend;
my $conf = $cb->configure_object;
my %hash = @_;
my $shell = $conf->get_program('shell');
unless( $shell ) {
$self->__print(
loc("Your config does not specify a subshell!"), "\n",
loc("Perhaps you need to re-run your setup?"), "\n"
);
return;
}
my $args; my $mods; my $opts;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
modules => { required => 1, store => \$mods },
options => { default => { }, store => \$opts },
};
$args = check( $tmpl, \%hash ) or return;
}
my $cwd = Cwd::cwd();
for my $mod (@$mods) {
$mod->fetch( %$opts ) or next;
$mod->extract( %$opts ) or next;
$cb->_chdir( dir => $mod->status->extract() ) or next;
#local $ENV{PERL5OPT} = CPANPLUS::inc->original_perl5opt;
if( system($shell) and $! ) {
$self->__print(
loc("Error executing your subshell '%1': %2",
$shell, $!),"\n"
);
next;
}
}
$cb->_chdir( dir => $cwd );
return 1;
}
sub _distributions {
my $self = shift;
my $cb = $self->backend;
my $conf = $cb->configure_object;
my %hash = @_;
my $args; my $mods; my $opts;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
modules => { required => 1, store => \$mods },
options => { default => { }, store => \$opts },
};
$args = check( $tmpl, \%hash ) or return;
}
my @list;
for my $mod (@$mods) {
push @list, sort { $a->version <=> $b->version }
grep { defined } $mod->distributions( %$opts );
}
my @rv = sort { $a->module cmp $b->module } @list;
$self->cache([undef,@rv]);
$self->__display_results;
return 1;
}
sub _reload_indices {
my $self = shift;
my $cb = $self->backend;
my %hash = @_;
my $args; my $opts;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
options => { default => { }, store => \$opts },
};
$args = check( $tmpl, \%hash ) or return;
}
my $rv = $cb->reload_indices( %$opts );
### so the update failed, but you didnt give it any options either
if( !$rv and !(keys %$opts) ) {
$self->__print(
"\nFailure may be due to corrupt source files\n" .
"Try this:\n\tx --update_source\n\n" );
}
return $rv;
}
sub _install {
my $self = shift;
my $cb = $self->backend;
my $conf = $cb->configure_object;
my %hash = @_;
my $args; my $mods; my $opts; my $choice;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
modules => { required => 1, store => \$mods },
options => { default => { }, store => \$opts },
choice => { required => 1, store => \$choice,
allow => [qw|i t|] },
};
$args = check( $tmpl, \%hash ) or return;
}
unless( scalar @$mods ) {
$self->__print( loc("Nothing done\n") );
return;
}
my $target = $choice eq 'i' ? TARGET_INSTALL : TARGET_CREATE;
my $prompt = $choice eq 'i' ? loc('Installing ') : loc('Testing ');
my $action = $choice eq 'i' ? 'install' : 'test';
my $status = {};
### first loop over the mods to install them ###
for my $mod (@$mods) {
$self->__print( $prompt, $mod->module, " (".$mod->version.")", "\n" );
my $log_length = length CPANPLUS::Error->stack_as_string;
### store the status for look up when we're done with all
### install calls
$status->{$mod} = $mod->install( %$opts, target => $target );
### would you like a log file of what happened?
if( $conf->get_conf('write_install_logs') ) {
if ( ON_WIN32 and !check_install(
module => 'IPC::Run', version => 0.55 )
) {
error(loc("IPC::Run version '%1' is required on MSWin32"
. " in order to capture buffers."
. " The logfile generated may not contain"
. " any useful data, until it is installed", 0.55));
}
my $dir = File::Spec->catdir(
$conf->get_conf('base'),
$conf->_get_build('install_log_dir'),
);
### create the dir if it doesn't exit yet
$cb->_mkdir( dir => $dir ) unless -d $dir;
my $file = File::Spec->catfile(
$dir,
INSTALL_LOG_FILE->( $mod )
);
if ( open my $fh, ">$file" ) {
my $stack = CPANPLUS::Error->stack_as_string;
### remove everything in the log that was there *before*
### we started this install
substr( $stack, 0, $log_length, '' );
print $fh $stack;
close $fh;
$self->__print(
loc("*** Install log written to:\n %1\n\n", $file)
);
} else {
warn "Could not open '$file': $!\n";
next;
}
}
}
my $flag;
### then report whether all this went ok or not ###
for my $mod (@$mods) {
# if( $mod->status->installed ) {
if( $status->{$mod} ) {
$self->__print(
loc("Module '%1' %tense(%2,past) successfully\n",
$mod->module, $action)
);
} else {
$flag++;
$self->__print(
loc("Error %tense(%1,present) '%2'\n", $action, $mod->module)
);
}
}
if( !$flag ) {
$self->__print(
loc("No errors %tense(%1,present) all modules", $action), "\n"
);
} else {
$self->__print(
loc("Problem %tense(%1,present) one or more modules", $action)
);
$self->__print( "\n" );
$self->__print(
loc("*** You can view the complete error buffer by pressing ".
"'%1' ***\n", 'p')
) unless $conf->get_conf('verbose') || $self->noninteractive;
}
$self->__print( "\n" );
return !$flag;
}
sub __ask_about_install {
my $mod = shift or return;
my $prereq = shift or return;
my $term = $Shell->term;
$Shell->__print( "\n" );
$Shell->__print( loc("Module '%1' requires '%2' to be installed",
$mod->module, $prereq->module ) );
$Shell->__print( "\n\n" );
### previously cached answer?
return $Shell->settings->{'install_all_prereqs'}
if defined $Shell->settings->{'install_all_prereqs'};
$Shell->__print(
loc( "If you don't wish to see this question anymore\n".
"you can disable it by entering the following ".
"commands on the prompt:\n '%1'",
's conf prereqs 1; s save' ) );
$Shell->__print("\n\n");
my $yes = loc("Yes");
my $no = loc("No");
my $all = loc("Yes to all (for this module)");
my $none = loc("No to all (for this module)");
my $reply = $term->get_reply(
prompt => loc("Should I install this module?"),
choices => [ $yes, $no, $all, $none ],
default => $yes,
);
### if 'all' or 'none', save this, so we can apply it to
### other prereqs in this chain.
$Shell->settings->{'install_all_prereqs'} =
$reply eq $all ? 1 :
$reply eq $none ? 0 :
undef;
### if 'yes' or 'all', the user wants it installed
return $reply eq $all ? 1 :
$reply eq $yes ? 1 :
0;
}
sub __ask_about_send_test_report {
my($mod, $grade) = @_;
return 1 unless $grade eq GRADE_FAIL;
my $term = $Shell->term;
$Shell->__print( "\n" );
$Shell->__print(
loc("Test report prepared for module '%1'.\n Would you like to ".
"send it? (You can edit it if you like)", $mod->module ) );
$Shell->__print( "\n\n" );
my $bool = $term->ask_yn(
prompt => loc("Would you like to send the test report?"),
default => 'n'
);
return $bool;
}
sub __ask_about_edit_test_report {
my($mod, $grade) = @_;
return 0 unless $grade eq GRADE_FAIL;
my $term = $Shell->term;
$Shell->__print( "\n" );
$Shell->__print(
loc("Test report prepared for module '%1'. You can edit this ".
"report if you would like", $mod->module ) );
$Shell->__print("\n\n");
my $bool = $term->ask_yn(
prompt => loc("Would you like to edit the test report?"),
default => 'y'
);
return $bool;
}
sub __ask_about_test_failure {
my $mod = shift;
my $captured = shift || '';
my $term = $Shell->term;
$Shell->__print( "\n" );
$Shell->__print(
loc( "The tests for '%1' failed. Would you like me to proceed ".
"anyway or should we abort?", $mod->module ) );
$Shell->__print( "\n\n" );
my $bool = $term->ask_yn(
prompt => loc("Proceed anyway?"),
default => 'n',
);
return $bool;
}
sub _details {
my $self = shift;
my $cb = $self->backend;
my $conf = $cb->configure_object;
my %hash = @_;
my $args; my $mods; my $opts;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
modules => { required => 1, store => \$mods },
options => { default => { }, store => \$opts },
};
$args = check( $tmpl, \%hash ) or return;
}
### every module has about 10 lines of details
### maybe more later with Module::CPANTS etc
$self->_pager_open if scalar @$mods * 10 > $self->_term_rowcount;
my $format = "%-24s %-45s\n";
my $cformat = "%-24s %-45s %-10s\n";
for my $mod (@$mods) {
my $href = $mod->details( %$opts );
my @list = sort { $a->module cmp $b->module } $mod->contains;
unless( $href ) {
$self->__print(
loc("No details for %1 - it might be outdated.",
$mod->module), "\n" );
next;
} else {
$self->__print( loc( "Details for '%1'\n", $mod->module ) );
for my $item ( sort keys %$href ) {
$self->__printf( $format, $item, $href->{$item} );
}
my $showed;
for my $item ( @list ) {
$self->__printf(
$cformat, ($showed ? '' : 'Contains:'),
$item->module, $item->version
);
$showed++;
}
$self->__print( "\n" );
}
}
$self->_pager_close;
$self->__print( "\n" );
return 1;
}
sub _print {
my $self = shift;
my %hash = @_;
my $args; my $opts; my $file;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
options => { default => { }, store => \$opts },
input => { default => '', store => \$file },
};
$args = check( $tmpl, \%hash ) or return;
}
my $old; my $fh;
if( $file ) {
$fh = FileHandle->new( ">$file" )
or( warn loc("Could not open '%1': '%2'", $file, $!),
return
);
$old = select $fh;
}
$self->_pager_open if !$file;
$self->__print( CPANPLUS::Error->stack_as_string );
$self->_pager_close;
select $old if $old;
$self->__print( "\n" );
return 1;
}
sub _set_conf {
my $self = shift;
my %hash = @_;
my $cb = $self->backend;
my $conf = $cb->configure_object;
### possible options
### XXX hard coded, not optimal :(
my %types = (
reconfigure => '',
save => q([user | system | boxed]),
edit => '',
program => q([key => val]),
conf => q([key => val]),
mirrors => '',
selfupdate => '', # XXX add all opts here?
);
my $args; my $opts; my $input;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
options => { default => { }, store => \$opts },
input => { default => '', store => \$input },
};
$args = check( $tmpl, \%hash ) or return;
}
my ($type,$key,$value) = $input =~ m/(\w+)\s*(\w*)\s*(.*?)$/;
$value =~ s/\s+$//g if $value;
$type = '' unless defined $type;
$type = lc $type;
if( $type eq 'reconfigure' ) {
my $setup = CPANPLUS::Configure::Setup->new(
configure_object => $conf,
term => $self->term,
backend => $cb,
);
return $setup->init;
} elsif ( $type eq 'save' ) {
my $where = {
user => CONFIG_USER,
system => CONFIG_SYSTEM,
boxed => CONFIG_BOXED,
}->{ $key } || CONFIG_USER;
### boxed is special, so let's get its value from %INC
### so we can tell it where to save
### XXX perhaps this logic should be generic for all
### types, and put in the ->save() routine
my $dir;
if( $where eq CONFIG_BOXED ) {
my $file = join( '/', split( '::', CONFIG_BOXED ) ) . '.pm';
my $file_re = quotemeta($file);
my $path = $INC{$file} || '';
$path =~ s/$file_re$//;
$dir = $path;
}
my $rv = $cb->configure_object->save( $where => $dir );
$self->__print(
$rv
? loc("Configuration successfully saved to %1\n (%2)\n",
$where, $rv)
: loc("Failed to save configuration\n" )
);
return $rv;
} elsif ( $type eq 'edit' ) {
my $editor = $conf->get_program('editor')
or( print(loc("No editor specified")), return );
my $where = {
user => CONFIG_USER,
system => CONFIG_SYSTEM,
}->{ $key } || CONFIG_USER;
my $file = $conf->_config_pm_to_file( $where );
system($editor,$file);
### now reload it
### disable warnings for this
{ require Module::Loaded;
Module::Loaded::mark_as_unloaded( $where );
### reinitialize the config
local $^W;
$conf->init;
}
return 1;
} elsif ( $type eq 'mirrors' ) {
$self->__print(
loc("Readonly list of mirrors (in order of preference):\n\n" ) );
my $i;
for my $host ( @{$conf->get_conf('hosts')} ) {
my $uri = $cb->_host_to_uri( %$host );
$i++;
$self->__print( "\t[$i] $uri\n" );
}
$self->__print(
loc("\nTo edit this list, please type: '%1'\n", 's edit') );
} elsif ( $type eq 'selfupdate' ) {
my %valid = map { $_ => $_ }
$cb->selfupdate_object->list_categories;
unless( $valid{$key} ) {
$self->__print(
loc( "To update your current CPANPLUS installation, ".
"choose one of the these options:\n%1",
( join $/, map {
sprintf "\ts selfupdate %-17s " .
"[--latest=0] [--dryrun]", $_
} sort keys %valid )
)
);
} else {
my %update_args = (
update => $key,
latest => 1,
%$opts
);
my %list = $cb->selfupdate_object
->list_modules_to_update( %update_args );
$self->__print(loc("The following updates will take place:"),$/.$/);
for my $feature ( sort keys %list ) {
my $aref = $list{$feature};
### is it a 'feature' or a built in?
$self->__print(
$valid{$feature}
? " " . ucfirst($feature) . ":\n"
: " Modules for '$feature' support:\n"
);
### show what modules would be installed
$self->__print(
scalar @$aref
? map { sprintf " %-42s %-6s -> %-6s \n",
$_->name, $_->installed_version, $_->version
} @$aref
: " No upgrades required\n"
);
$self->__print( $/ );
}
unless( $opts->{'dryrun'} ) {
$self->__print( loc("Updating your CPANPLUS installation\n") );
$cb->selfupdate_object->selfupdate( %update_args );
}
}
} else {
if ( $type eq 'program' or $type eq 'conf' ) {
my $format = {
conf => '%-25s %s',
program => '%-12s %s',
}->{ $type };
unless( $key ) {
my @list = grep { $_ ne 'hosts' }
$conf->options( type => $type );
my $method = 'get_' . $type;
local $Data::Dumper::Indent = 0;
for my $name ( @list ) {
my $val = $conf->$method($name) || '';
($val) = ref($val)
? (Data::Dumper::Dumper($val) =~ /= (.*);$/)
: "'$val'";
$self->__printf( " $format\n", $name, $val );
}
} elsif ( $key eq 'hosts' or $key eq 'lib' ) {
$self->__print(
loc( "Setting %1 is not trivial.\n" .
"It is suggested you use '%2' and edit the " .
"configuration file manually", $key, 's edit')
);
} else {
my $method = 'set_' . $type;
$conf->$method( $key => defined $value ? $value : '' )
and $self->__print( loc("Key '%1' was set to '%2'", $key,
defined $value ? $value : 'EMPTY STRING') );
}
} else {
$self->__print( loc("Unknown type '%1'",$type || 'EMPTY' ) );
$self->__print( $/ );
$self->__print( loc("Try one of the following:") );
$self->__print( $/, join $/,
map { sprintf "\t%-11s %s", $_, $types{$_} }
sort keys %types );
}
}
$self->__print( "\n" );
return 1;
}
sub _uptodate {
my $self = shift;
my %hash = @_;
my $cb = $self->backend;
my $conf = $cb->configure_object;
my $opts; my $mods;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
options => { default => { }, store => \$opts },
modules => { required => 1, store => \$mods },
};
check( $tmpl, \%hash ) or return;
}
### long listing? short is default ###
my $long = $opts->{'long'} ? 1 : 0;
my @list = scalar @$mods ? @$mods : @{$cb->_all_installed};
my @rv; my %seen;
for my $mod (@list) {
### skip this mod if it's up to date ###
next if $mod->is_uptodate;
### skip this mod if it's core ###
next if $mod->package_is_perl_core;
if( $long or !$seen{$mod->package}++ ) {
push @rv, $mod;
}
}
@rv = sort { $a->module cmp $b->module } @rv;
$self->cache([undef,@rv]);
$self->_pager_open if scalar @rv >= $self->_term_rowcount;
my $format = "%5s %12s %12s %-36s %-10s\n";
my $i = 1;
for my $mod ( @rv ) {
$self->__printf(
$format,
$i,
$self->_format_version($mod->installed_version) || 'Unparsable',
$self->_format_version( $mod->version ),
$mod->module,
$mod->author->cpanid
);
$i++;
}
$self->_pager_close;
return 1;
}
sub _autobundle {
my $self = shift;
my %hash = @_;
my $cb = $self->backend;
my $conf = $cb->configure_object;
my $opts; my $input;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
options => { default => { }, store => \$opts },
input => { default => '', store => \$input },
};
check( $tmpl, \%hash ) or return;
}
$opts->{'path'} = $input if $input;
my $where = $cb->autobundle( %$opts );
$self->__print(
$where
? loc("Wrote autobundle to '%1'", $where)
: loc("Could not create autobundle" )
);
$self->__print( "\n" );
return $where ? 1 : 0;
}
sub _uninstall {
my $self = shift;
my %hash = @_;
my $cb = $self->backend;
my $term = $self->term;
my $conf = $cb->configure_object;
my $opts; my $mods;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
options => { default => { }, store => \$opts },
modules => { default => [], store => \$mods },
};
check( $tmpl, \%hash ) or return;
}
my $force = $opts->{'force'} || $conf->get_conf('force');
unless( $force ) {
my $list = join "\n", map { ' ' . $_->module } @$mods;
$self->__print( loc("
This will uninstall the following modules:
%1
Note that if you installed them via a package manager, you probably
should use the same package manager to uninstall them
", $list) );
return unless $term->ask_yn(
prompt => loc("Are you sure you want to continue?"),
default => 'n',
);
}
### first loop over all the modules to uninstall them ###
for my $mod (@$mods) {
$self->__print( loc("Uninstalling '%1'", $mod->module), "\n" );
$mod->uninstall( %$opts );
}
my $flag;
### then report whether all this went ok or not ###
for my $mod (@$mods) {
if( $mod->status->uninstall ) {
$self->__print(
loc("Module '%1' %tense(uninstall,past) successfully\n",
$mod->module ) );
} else {
$flag++;
$self->__print(
loc("Error %tense(uninstall,present) '%1'\n", $mod->module) );
}
}
if( !$flag ) {
$self->__print(
loc("All modules %tense(uninstall,past) successfully"), "\n" );
} else {
$self->__print(
loc("Problem %tense(uninstall,present) one or more modules" ),
"\n" );
$self->__print(
loc("*** You can view the complete error buffer by pressing '%1'".
"***\n", 'p') ) unless $conf->get_conf('verbose');
}
$self->__print( "\n" );
return !$flag;
}
sub _reports {
my $self = shift;
my %hash = @_;
my $cb = $self->backend;
my $term = $self->term;
my $conf = $cb->configure_object;
my $opts; my $mods;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
options => { default => { }, store => \$opts },
modules => { default => '', store => \$mods },
};
check( $tmpl, \%hash ) or return;
}
### XXX might need to be conditional ###
$self->_pager_open;
for my $mod (@$mods) {
my @list = $mod->fetch_report( %$opts )
or( print(loc("No reports available for this distribution.")),
next
);
@list = reverse
map { $_->[0] }
sort { $a->[1] cmp $b->[1] }
map { [$_, $_->{'dist'}.':'.$_->{'platform'}] } @list;
### XXX this may need to be sorted better somehow ###
my $url;
my $format = "%8s %s %s\n";
my %seen;
for my $href (@list ) {
$self->__print(
"[" . $mod->author->cpanid .'/'. $href->{'dist'} . "]\n"
) unless $seen{ $href->{'dist'} }++;
$self->__printf(
$format,
$href->{'grade'},
$href->{'platform'},
($href->{'details'} ? '(*)' : '')
);
$url ||= $href->{'details'};
}
$self->__print( "\n==> $url\n" ) if $url;
$self->__print( "\n" );
}
$self->_pager_close;
return 1;
}
### Load plugins
{ my @PluginModules;
my %Dispatch = (
showtip => [ __PACKAGE__, '_show_random_tip'],
plugins => [ __PACKAGE__, '_list_plugins' ],
'?' => [ __PACKAGE__, '_plugins_usage' ],
);
sub plugin_modules { return @PluginModules }
sub plugin_table { return %Dispatch }
my $init_done;
sub _plugins_init {
### only initialize once
return if $init_done++;
### find all plugins first
if( check_install( module => 'Module::Pluggable', version => '2.4') ) {
require Module::Pluggable;
my $only_re = __PACKAGE__ . '::Plugins::\w+$';
Module::Pluggable->import(
sub_name => '_plugins',
search_path => __PACKAGE__,
only => qr/$only_re/,
#except => [ INSTALLER_MM, INSTALLER_SAMPLE ]
);
push @PluginModules, __PACKAGE__->_plugins;
}
### now try to load them
for my $p ( __PACKAGE__->plugin_modules ) {
my %map = eval { load $p; $p->import; $p->plugins };
error(loc("Could not load plugin '$p': $@")), next if $@;
### register each plugin
while( my($name, $func) = each %map ) {
if( not length $name or not length $func ) {
error(loc("Empty plugin name or dispatch function detected"));
next;
}
if( exists( $Dispatch{$name} ) ) {
error(loc("'%1' is already registered by '%2'",
$name, $Dispatch{$name}->[0]));
next;
}
### register name, package and function
$Dispatch{$name} = [ $p, $func ];
}
}
}
### dispatch a plugin command to its function
sub _meta {
my $self = shift;
my %hash = @_;
my $cb = $self->backend;
my $term = $self->term;
my $conf = $cb->configure_object;
my $opts; my $input;
{ local $Params::Check::ALLOW_UNKNOWN = 1;
my $tmpl = {
options => { default => { }, store => \$opts },
input => { default => '', store => \$input },
};
check( $tmpl, \%hash ) or return;
}
$input =~ s/\s*(\S+)\s*//;
my $cmd = $1;
### look up the command, or go to the default
my $aref = $Dispatch{ $cmd } || [ __PACKAGE__, '_plugin_default' ];
my($pkg,$func) = @$aref;
my $rv = eval { $pkg->$func( $self, $cb, $cmd, $input, $opts ) };
error( $@ ) if $@;
### return $rv instead, so input loop can be terminated?
return 1;
}
sub _plugin_default { error(loc("No such plugin command")) }
}
### plugin commands
{ my $help_format = " /%-21s # %s\n";
sub _list_plugins {
my $self = shift;
$self->__print( loc("Available plugins:\n") );
$self->__print( loc(" List usage by using: /? PLUGIN_NAME\n" ) );
$self->__print( $/ );
my %table = __PACKAGE__->plugin_table;
for my $name( sort keys %table ) {
my $pkg = $table{$name}->[0];
my $this = __PACKAGE__;
my $who = $pkg eq $this
? "Standard Plugin"
: do { my $v = $self->_format_version($pkg->VERSION) || '';
$pkg =~ s/^$this/../;
sprintf "Provided by: %-30s %-10s", $pkg, $v;
};
$self->__printf( $help_format, $name, $who );
}
$self->__print( $/.$/ );
$self->__print(
" Write your own plugins? Read the documentation of:\n" .
" CPANPLUS::Shell::Default::Plugins::HOWTO\n" );
$self->__print( $/ );
}
sub _list_plugins_help {
return sprintf $help_format, 'plugins', loc("lists available plugins");
}
### registered as a plugin too
sub _show_random_tip_help {
return sprintf $help_format, 'showtip', loc("show usage tips" );
}
sub _plugins_usage {
my $self = shift;
my $shell = shift;
my $cb = shift;
my $cmd = shift;
my $input = shift;
my %table = $self->plugin_table;
my @list = length $input ? split /\s+/, $input : sort keys %table;
for my $name( @list ) {
### no such plugin? skip
error(loc("No such plugin '$name'")), next unless $table{$name};
my $pkg = $table{$name}->[0];
my $func = $table{$name}->[1] . '_help';
if ( my $sub = $pkg->can( $func ) ) {
eval { $self->__print( $sub->() ) };
error( $@ ) if $@;
} else {
$self->__print(" No usage for '$name' -- try perldoc $pkg");
}
$self->__print( $/ );
}
$self->__print( $/.$/ );
}
sub _plugins_usage_help {
return sprintf $help_format, '? [NAME ...]',
loc("show usage for plugins");
}
}
### send a command to a remote host, retrieve the answer;
sub __send_remote_command {
my $self = shift;
my $cmd = shift;
my $remote = $self->remote or return;
my $user = $remote->{'username'};
my $pass = $remote->{'password'};
my $conn = $remote->{'connection'};
my $end = "\015\012";
my $answer;
my $send = join "\0", $user, $pass, $cmd;
print $conn $send . $end;
### XXX why doesn't something like this just work?
#1 while recv($conn, $answer, 1024, 0);
while(1) {
my $buff;
$conn->recv( $buff, 1024, 0 );
$answer .= $buff;
last if $buff =~ /$end$/;
}
my($status,$buffer) = split "\0", $answer;
return ($status, $buffer);
}
sub _read_configuration_from_rc {
my $self = shift;
my $rc_file = shift;
my $href;
if( can_load( modules => { 'Config::Auto' => '0.0' } ) ) {
$Config::Auto::DisablePerl = 1;
eval { $href = Config::Auto::parse( $rc_file, format => 'space' ) };
$self->__print(
loc( "Unable to read in config file '%1': %2", $rc_file, $@ )
) if $@;
}
return $href || {};
}
{ my @tips = (
loc( "You can update CPANPLUS by running: '%1'", 's selfupdate' ),
loc( "You can install modules by URL using '%1'", 'i URL' ),
loc( "You can turn off these tips using '%1'",
's conf show_startup_tip 0' ),
loc( "You can use wildcards like '%1' and '%2' on search results",
'*', '2..5' ) ,
loc( "You can use plugins. Type '%1' to list available plugins",
'/plugins' ),
loc( "You can show all your out of date modules using '%1'", 'o' ),
loc( "Many operations take options, like '%1', '%2' or '%3'",
'--verbose', '--force', '--skiptest' ),
loc( "The documentation in %1 and %2 is very useful",
"CPANPLUS::Module", "CPANPLUS::Backend" ),
loc( "You can type '%1' for help and '%2' to exit", 'h', 'q' ),
loc( "You can run an interactive setup using '%1'", 's reconfigure' ),
loc( "You can add custom sources to your index. See '%1' for details",
'/cs --help' ),
loc( "CPANPLUS now has an experimental SQLite backend. You can enable ".
"it via: '%1'. Update dependencies via '%2'",
's conf source_engine CPANPLUS::Internals::Source::SQLite; s save',
's selfupdate enabled_features ' ),
);
sub _show_random_tip {
my $self = shift;
$self->__print( $/, "Did you know...\n ",
$tips[ int rand scalar @tips ], $/ );
return 1;
}
}
sub _reload_shell {
{ exec ($^X, '-MCPANPLUS', '-e', 'shell') }; print STDERR "couldn't exec foo: $!";
}
1;
__END__
=pod
=head1 BUG REPORTS
Please report bugs or other issues to E<lt>bug-cpanplus@rt.cpan.org<gt>.
=head1 AUTHOR
This module by Jos Boumans E<lt>kane@cpan.orgE<gt>.
=head1 COPYRIGHT
The CPAN++ interface (of which this module is a part of) is copyright (c)
2001 - 2007, Jos Boumans E<lt>kane@cpan.orgE<gt>. All rights reserved.
This library is free software; you may redistribute and/or modify it
under the same terms as Perl itself.
=head1 SEE ALSO
L<CPANPLUS::Shell::Classic>, L<CPANPLUS::Shell>, L<cpanp>
=cut
# Local variables:
# c-indentation-style: bsd
# c-basic-offset: 4
# indent-tabs-mode: nil
# End:
# vim: expandtab shiftwidth=4:
__END__
TODO:
e => "_expand_inc", # scratch it, imho -- not used enough
### free letters: g j k n y ###
Mini Shell