Current File : //usr/share/mysql-test/suite/perfschema/r/binlog_edge_stmt.result
set binlog_format=statement;
RESET MASTER;
drop database if exists my_replicated_db;
call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
create database my_replicated_db;
create table my_replicated_db.my_tx_table(a bigint) engine = innodb;
create table my_replicated_db.my_non_tx_table(a bigint) engine = myisam;
create table my_replicated_db.my_bh_table(a bigint) engine = blackhole;
use test;
drop table if exists marker_start;
Warnings:
Note 1051 Unknown table 'test.marker_start'
use my_replicated_db;
insert into my_tx_table(a)
values (1000), (2000), (3000);
insert into my_non_tx_table(a)
values (1000), (2000), (3000);
insert into my_bh_table(a)
values (1000), (2000), (3000);
use test;
drop table if exists marker_insert_select;
Warnings:
Note 1051 Unknown table 'test.marker_insert_select'
use my_replicated_db;
insert into my_tx_table(a)
select thread_id from performance_schema.threads;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_non_tx_table(a)
select thread_id from performance_schema.threads;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_bh_table(a)
select thread_id from performance_schema.threads;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_tx_table(a)
select id from information_schema.processlist;
insert into my_non_tx_table(a)
select id from information_schema.processlist;
insert into my_bh_table(a)
select id from information_schema.processlist;
insert into my_tx_table(a)
select thread_id from mysql.general_log;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_non_tx_table(a)
select thread_id from mysql.general_log;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_bh_table(a)
select thread_id from mysql.general_log;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_tx_table(a)
select thread_id from mysql.slow_log;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_non_tx_table(a)
select thread_id from mysql.slow_log;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_bh_table(a)
select thread_id from mysql.slow_log;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_tx_table(a)
select Relay_log_pos from mysql.slave_relay_log_info;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_non_tx_table(a)
select Relay_log_pos from mysql.slave_relay_log_info;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_bh_table(a)
select Relay_log_pos from mysql.slave_relay_log_info;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_tx_table(a)
select Master_log_pos from mysql.slave_master_info;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_non_tx_table(a)
select Master_log_pos from mysql.slave_master_info;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_bh_table(a)
select Master_log_pos from mysql.slave_master_info;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_tx_table(a)
select Relay_log_pos from mysql.slave_worker_info;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_non_tx_table(a)
select Relay_log_pos from mysql.slave_worker_info;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
insert into my_bh_table(a)
select Relay_log_pos from mysql.slave_worker_info;
Warnings:
Note 1592 Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
use test;
drop table if exists marker_multi_update;
Warnings:
Note 1051 Unknown table 'test.marker_multi_update'
use my_replicated_db;
update my_tx_table, performance_schema.setup_instruments
set my_tx_table.a = my_tx_table.a + 1,
performance_schema.setup_instruments.timed= 'NO';
update my_non_tx_table, performance_schema.setup_instruments
set my_non_tx_table.a = my_non_tx_table.a + 1,
performance_schema.setup_instruments.timed= 'NO';
update my_bh_table, performance_schema.setup_instruments
set my_bh_table.a = my_bh_table.a + 1,
performance_schema.setup_instruments.timed= 'NO';
use test;
drop table if exists marker_multi_delete;
Warnings:
Note 1051 Unknown table 'test.marker_multi_delete'
use my_replicated_db;
insert into performance_schema.setup_actors
values ('FOO', 'FOO', 'FOO');
delete my_tx_table.*, performance_schema.setup_actors.*
from my_tx_table, performance_schema.setup_actors
where my_tx_table.a != 1000
or performance_schema.setup_actors.role='FOO';
insert into performance_schema.setup_actors
values ('BAR', 'BAR', 'BAR');
delete my_non_tx_table.*, performance_schema.setup_actors.*
from my_non_tx_table, performance_schema.setup_actors
where my_non_tx_table.a != 1000
or performance_schema.setup_actors.role='BAR';
insert into performance_schema.setup_actors
values ('BAZ', 'BAZ', 'BAZ');
delete my_bh_table.*, performance_schema.setup_actors.*
from my_bh_table, performance_schema.setup_actors
where my_bh_table.a != 1000
or performance_schema.setup_actors.role='BAZ';
use test;
drop table if exists marker_end;
Warnings:
Note 1051 Unknown table 'test.marker_end'
drop database my_replicated_db;
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Query # # drop database if exists my_replicated_db
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `mtr`; INSERT INTO test_suppressions (pattern) VALUES ( NAME_CONST('pattern',_latin1'Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT' COLLATE 'latin1_swedish_ci'))
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # create database my_replicated_db
master-bin.000001 # Query # # use `test`; create table my_replicated_db.my_tx_table(a bigint) engine = innodb
master-bin.000001 # Query # # use `test`; create table my_replicated_db.my_non_tx_table(a bigint) engine = myisam
master-bin.000001 # Query # # use `test`; create table my_replicated_db.my_bh_table(a bigint) engine = blackhole
master-bin.000001 # Query # # use `test`; DROP TABLE IF EXISTS `marker_start` /* generated by server */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_tx_table(a)
values (1000), (2000), (3000)
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_non_tx_table(a)
values (1000), (2000), (3000)
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_bh_table(a)
values (1000), (2000), (3000)
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # use `test`; DROP TABLE IF EXISTS `marker_insert_select` /* generated by server */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_tx_table(a)
select thread_id from performance_schema.threads
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_non_tx_table(a)
select thread_id from performance_schema.threads
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_bh_table(a)
select thread_id from performance_schema.threads
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_tx_table(a)
select id from information_schema.processlist
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_non_tx_table(a)
select id from information_schema.processlist
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_bh_table(a)
select id from information_schema.processlist
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_tx_table(a)
select thread_id from mysql.general_log
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_non_tx_table(a)
select thread_id from mysql.general_log
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_bh_table(a)
select thread_id from mysql.general_log
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_tx_table(a)
select thread_id from mysql.slow_log
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_non_tx_table(a)
select thread_id from mysql.slow_log
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_bh_table(a)
select thread_id from mysql.slow_log
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_tx_table(a)
select Relay_log_pos from mysql.slave_relay_log_info
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_non_tx_table(a)
select Relay_log_pos from mysql.slave_relay_log_info
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_bh_table(a)
select Relay_log_pos from mysql.slave_relay_log_info
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_tx_table(a)
select Master_log_pos from mysql.slave_master_info
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_non_tx_table(a)
select Master_log_pos from mysql.slave_master_info
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_bh_table(a)
select Master_log_pos from mysql.slave_master_info
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_tx_table(a)
select Relay_log_pos from mysql.slave_worker_info
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_non_tx_table(a)
select Relay_log_pos from mysql.slave_worker_info
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # BEGIN
master-bin.000001 # Query # # use `my_replicated_db`; insert into my_bh_table(a)
select Relay_log_pos from mysql.slave_worker_info
master-bin.000001 # Query # # COMMIT
master-bin.000001 # Query # # use `test`; DROP TABLE IF EXISTS `marker_multi_update` /* generated by server */
master-bin.000001 # Query # # use `test`; DROP TABLE IF EXISTS `marker_multi_delete` /* generated by server */
master-bin.000001 # Query # # use `test`; DROP TABLE IF EXISTS `marker_end` /* generated by server */
master-bin.000001 # Query # # drop database my_replicated_db
truncate table performance_schema.setup_actors;
insert into performance_schema.setup_actors values ('%', '%', '%');
Mini Shell