Current File : //usr/share/mysql-test/suite/funcs_1/triggers/triggers_0407.inc
#======================================================================
#
# Trigger Tests
# (test case numbering refer to requirement document TP v1.1)
#======================================================================
USE test;
--source suite/funcs_1/include/tb3.inc
--disable_abort_on_error
# General setup for Trigger tests
let $message= Testcase: 3.5:;
--source include/show_msg.inc
--disable_abort_on_error
create User test_general@localhost;
set password for test_general@localhost = password('PWD');
revoke ALL PRIVILEGES, GRANT OPTION FROM test_general@localhost;
create User test_super@localhost;
set password for test_super@localhost = password('PWD');
grant ALL on *.* to test_super@localhost with grant OPTION;
connect (con1_general,localhost,test_general,PWD,test,$MASTER_MYPORT,$MASTER_MYSOCK);
connect (con1_super,localhost,test_super,PWD,test,$MASTER_MYPORT,$MASTER_MYSOCK);
connection default;
####################################
############ Section 3.5.4 #########
# Drop Trigger Checkes: #
####################################
let $message= Testcase 3.5.4:;
--source include/show_msg.inc
connection default;
use test;
#Section 3.5.4.1
# Testcase: Ensure that the DROP TRIGGER statement cleanly drops its target trigger.
let $message= Testcase 3.5.4.1:;
--source include/show_msg.inc
connection con1_super;
create database db_drop;
Use db_drop;
--replace_result $engine_type <engine_to_be_used>
eval create table t1 (f1 char(30)) engine = $engine_type;
grant INSERT, SELECT on db_drop.t1 to test_general;
Use db_drop;
Create trigger trg1 BEFORE INSERT on t1
for each row set new.f1='Trigger 3.5.4.1';
connection con1_general;
Use db_drop;
Insert into t1 values ('Insert error 3.5.4.1');
Select * from t1 order by f1;
connection con1_super;
drop trigger trg1;
select trigger_schema, trigger_name, event_object_table
from information_schema.triggers
where trigger_schema = 'db_drop'
order by trigger_name;
connection con1_general;
Insert into t1 values ('Insert no trigger 3.5.4.1');
Select * from t1 order by f1;
#Cleanup
--disable_warnings
connection con1_super;
--disable_warnings
--error 0,ER_TRG_DOES_NOT_EXIST
drop trigger trg1;
drop database if exists db_drop;
revoke ALL PRIVILEGES, GRANT OPTION FROM 'test_general'@'localhost';
--enable_warnings
#Section 3.5.4.2
# Test case: Ensure that DROP TRIGGER <trigger name> fails, with an appropriate error
# message, if the trigger name does not exist.
let $message= Testcase 3.5.4.2:;
--source include/show_msg.inc
connection con1_super;
create database db_drop2;
Use db_drop2;
--disable_warnings
drop table if exists t1_432 ;
--enable_warnings
--replace_result $engine_type <engine_to_be_used>
eval create table t1_432 (f1 char (30)) engine = $engine_type;
--error ER_TRG_DOES_NOT_EXIST
Drop trigger tr_does_not_exit;
#cleanup
--disable_warnings
drop table if exists t1_432 ;
drop database if exists db_drop2;
--enable_warnings
#Section 3.5.4.3
# Test case: Ensure that DROP TRIGGER <trigger name> fails, with an appropriate
# error message, if <trigger name> is not a qualified name.
let $message= Testcase 3.5.4.3:;
--source include/show_msg.inc
connection con1_super;
create database db_drop3;
Use db_drop3;
--disable_warnings
drop table if exists t1_433 ;
drop table if exists t1_433a ;
--enable_warnings
--replace_result $engine_type <engine_to_be_used>
eval create table t1_433 (f1 char (30)) engine = $engine_type;
--replace_result $engine_type <engine_to_be_used>
eval create table t1_433a (f1a char (5)) engine = $engine_type;
CREATE TRIGGER trg3 BEFORE INSERT on t1_433 for each row
set new.f1 = 'Trigger 3.5.4.3';
# Using table
--error ER_PARSE_ERROR
Drop trigger t1.433.trg3;
# Using database.table
--error ER_PARSE_ERROR
Drop trigger db_drop3.t1.433.trg3;
# wrong database
--error ER_TRG_DOES_NOT_EXIST
Drop trigger mysql.trg3;
# database does not exist
--error ER_TRG_DOES_NOT_EXIST
Drop trigger tbx.trg3;
#cleanup
Drop trigger db_drop3.trg3;
drop table if exists t1_433;
drop table if exists t1_433a;
drop database if exists db_drop3;
#Section 3.5.4.4
# Test case: Ensure that when a database is dropped, all triggers created within
# that database are also cleanly dropped.
let $message= Testcase 3.5.4.4:;
--source include/show_msg.inc
connection con1_super;
create database db_drop4;
Use db_drop4;
--replace_result $engine_type <engine_to_be_used>
eval create table t1 (f1 char(30)) engine = $engine_type;
grant INSERT, SELECT on db_drop4.t1 to test_general;
Create trigger trg4 BEFORE INSERT on t1
for each row set new.f1='Trigger 3.5.4.4';
connection con1_general;
Use db_drop4;
Insert into t1 values ('Insert 3.5.4.4');
Select * from t1;
connection con1_super;
Drop database db_drop4;
Show databases like 'db_drop4';
select trigger_schema, trigger_name, event_object_table
from information_schema.triggers
where information_schema.triggers.trigger_name='trg4';
create database db_drop4;
Use db_drop4;
--replace_result $engine_type <engine_to_be_used>
eval create table t1 (f1 char(30)) engine = $engine_type;
grant INSERT, SELECT on db_drop4.t1 to test_general;
connection con1_general;
Insert into t1 values ('2nd Insert 3.5.4.4');
Select * from t1;
#Cleanup
connection con1_super;
--disable_warnings
--error ER_TRG_DOES_NOT_EXIST
drop trigger trg4;
drop database if exists db_drop4;
--enable_warnings
revoke ALL PRIVILEGES, GRANT OPTION FROM 'test_general'@'localhost';
#Section 3.5.4.5
# Test case: Ensure that when a table is dropped, all triggers for which it is the
# subject table are also cleanly dropped.
let $message= Testcase 3.5.4.5:;
--source include/show_msg.inc
connection con1_super;
create database db_drop5;
Use db_drop5;
--replace_result $engine_type <engine_to_be_used>
eval create table t1 (f1 char(50)) engine = $engine_type;
grant INSERT, SELECT on t1 to test_general;
Create trigger trg5 BEFORE INSERT on t1
for each row set new.f1='Trigger 3.5.4.5';
connection con1_general;
Use db_drop5;
Insert into t1 values ('Insert 3.5.4.5');
Select * from t1;
connection con1_super;
Drop table t1;
Show tables;
select trigger_schema, trigger_name, event_object_table
from information_schema.triggers
where information_schema.triggers.trigger_name='trg5';
--replace_result $engine_type <engine_to_be_used>
eval create table t1 (f1 char(50)) engine = $engine_type;
grant INSERT, SELECT on t1 to test_general;
connection con1_general;
Insert into t1 values ('2nd Insert 3.5.4.5');
Select * from t1;
#Cleanup
connection con1_super;
--disable_warnings
--error ER_TRG_DOES_NOT_EXIST
drop trigger trg5;
drop database if exists db_drop5;
--enable_warnings
revoke ALL PRIVILEGES, GRANT OPTION FROM 'test_general'@'localhost';
##################################
######### Section 3.5.5 ##########
# Checks on the Subject Table #
##################################
let $message= Testcase 3.5.5:;
--source include/show_msg.inc
connection default;
use test;
#Section 3.5.5.1
# Test case: Ensure that, if CREATE TRIGGER is executed with a non-existent
# subject table, the statement fails with an appropriate error message.
let $message= Testcase 3.5.5.1:;
--source include/show_msg.inc
--error ER_NO_SUCH_TABLE
Create trigger trg1 before INSERT on t100 for each row set new.f2=1000;
#Section 3.5.5.2
# Test case: Ensure that, if CREATE TRIGGER is executed with a temporary table
# as the subject table, the statement fails with an appropriate error message.
let $message= Testcase 3.5.5.2:;
--source include/show_msg.inc
Create temporary table t1_temp (f1 bigint signed, f2 bigint unsigned);
--error ER_TRG_ON_VIEW_OR_TEMP_TABLE
Create trigger trg2 before INSERT
on t1_temp for each row set new.f2=9999;
#Cleanup
--disable_warnings
drop table t1_temp;
--enable_warnings
#Section 3.5.5.3
# Test case: Ensure that, if CREATE TRIGGER is executed with a view as the subject
# table, the statement fails with an appropriate error message.
let $message= Testcase 3.5.5.3:;
--source include/show_msg.inc
Create view vw3 as select f118 from tb3;
# OBN Not sure why the server is returning error ER_WRONG_OBJECT
--error ER_WRONG_OBJECT
Create trigger trg3 before INSERT
on vw3 for each row set new.f118='s';
#Cleanup
--disable_warnings
drop view vw3;
--enable_warnings
#Section 3.5.5.4
# Test case: Ensure that, if CREATE TRIGGER is executed with a table that resides
# in a different database than in which the trigger will reside, the
# statement fails with an appropriate error message; that is, ensure that
# the trigger and its subject table must reside in the same database.
let $message= Testcase 3.5.5.4:;
--source include/show_msg.inc
connection con1_super;
create database dbtest_one;
create database dbtest_two;
use dbtest_two;
--replace_result $engine_type <engine_to_be_used>
eval create table t2 (f1 char(15)) engine = $engine_type;
use dbtest_one;
--error ER_TRG_IN_WRONG_SCHEMA
create trigger trg4 before INSERT
on dbtest_two.t2 for each row set new.f1='trig 3.5.5.4';
grant INSERT, SELECT on dbtest_two.t2 to test_general;
grant SELECT on dbtest_one.* to test_general;
connection con1_general;
use dbtest_two;
Insert into t2 values ('1st Insert 3.5.5.4');
Select * from t2;
use dbtest_one;
Insert into dbtest_two.t2 values ('2nd Insert 3.5.5.4');
Select * from dbtest_two.t2 order by f1;
#Cleanup
connection con1_super;
--disable_warnings
revoke ALL PRIVILEGES, GRANT OPTION FROM 'test_general'@'localhost';
DROP DATABASE if exists dbtest_one;
drop database if EXISTS dbtest_two;
--enable_warnings
#####################################
########### Section 3.5.6 ###########
# Check on the Trigger Action Time #
#####################################
let $message= Testcase 3.5.6:;
--source include/show_msg.inc
connection default;
use test;
#Section 3.5.6.1
# Test case: Ensure that a trigger definition can specify a trigger action time of BEFORE.
# See section 3.5.1.1
let $message= Testcase 3.5.6.1 (see Testcase 3.5.1.1);
--source include/show_msg.inc
#Section 3.5.6.2
# Test case: Ensure that a trigger definition can specify a trigger action time of AFTER.
# See section 3.5.1.1
let $message= Testcase 3.5.6.2 (see Testcase 3.5.1.1);
--source include/show_msg.inc
#Section 3.5.6.3
# Test case: Ensure that a trigger definition that specifies a trigger action
# time that is not either BEFORE or AFTER fails, with an appropriate
# error message, at CREATE TRIGGER time.
let $message= Testcase 3.5.6.3:;
--source include/show_msg.inc
--error ER_PARSE_ERROR
Create trigger trg3_1 DURING UPDATE on tb3 for each row set new.f132=25;
--error ER_PARSE_ERROR
Create trigger trg3_2 TIME INSERT on tb3 for each row set new.f132=15;
#Cleanup
# OBN - Although none of the above should have been created we should do a cleanup
# since if they have been created, not dropping them will affect following
# tests.
--disable_warnings
--error 0, ER_TRG_DOES_NOT_EXIST
drop trigger tb3.trg3_1;
--error 0, ER_TRG_DOES_NOT_EXIST
drop trigger tb3.trg3_2;
--enable_warnings
#Section 3.5.6.4
# Test case: Ensure that a trigger defined with a trigger action time of BEFORE
# always executes its triggered action immediately before the trigger event.
# See section 3.5.1.1
let $message= Testcase 3.5.6.4 (see Testcase 3.5.1.1);
--source include/show_msg.inc
#Section 3.5.6.5
# Test case: Ensure that a trigger defined with a trigger action time of AFTER
# always executes its triggered action immediately after the trigger event.
let $message= Testcase 3.5.6.5 (see Testcase 3.5.1.1);
--source include/show_msg.inc
#############################
####### Section 3.5.7 #######
# Check on Trigger Event #
#############################
#Section 3.5.7.1
#Test case: Ensure that a trigger definition can specify a trigger event of INSERT.
let $message= Testcase 3.5.7.1 (see Testcase 3.5.1.1);
--source include/show_msg.inc
#Section 3.5.7.2
# Test case: Ensure that a trigger definition can specify a trigger event of UPDATE.
let $message= Testcase 3.5.7.2 (see Testcase 3.5.1.1);
--source include/show_msg.inc
#Section 3.5.7.3
# Test case: Ensure that a trigger definition can specify a trigger event of DELETE.
let $message= Testcase 3.5.7.3 (see Testcase 3.5.1.1);
--source include/show_msg.inc
#Section 3.5.7.4
# Test case: Ensure that a trigger definition that specifies a trigger event that
# is not either INSERT, UPDATE or DELETE fails, with an appropriate error
# message, at CREATE TRIGGER time.
let $message= Testcase 3.5.7.4:;
--source include/show_msg.inc
--error ER_PARSE_ERROR
Create trigger trg4_1 BEFORE SELECT on tb3 for each row set new.f132=5;
--error ER_PARSE_ERROR
Create trigger trg4_2 AFTER VALUE on tb3 for each row set new.f132=1;
#Cleanup
# OBN - Although none of the above should have been created we should do a cleanup
# since if they have been created, not dropping them will affect following
# tests.
--disable_warnings
--error 0, ER_TRG_DOES_NOT_EXIST
drop trigger tb3.trg4_1;
--error 0, ER_TRG_DOES_NOT_EXIST
drop trigger tb3.trg4_2;
--enable_warnings
#Section 3.5.7.5 / 3.5.7.6
# Test case: Ensure that it is not possible to create multiple BEFORE INSERT triggers
# on the same table, even if the triggers have different names / different
# triggered actions.
let $message= Testcase 3.5.7.5 / 3.5.7.6:;
--source include/show_msg.inc
Create trigger trg5_1 BEFORE INSERT
on tb3 for each row set new.f122='Trigger1 3.5.7.5/6';
--error ER_NOT_SUPPORTED_YET
Create trigger trg5_2 BEFORE INSERT
on tb3 for each row set new.f122='Trigger2 3.5.7.5';
Insert into tb3 (f121,f122) values ('Test 3.5.7.5/6','Insert 3.5.7.5');
Select f121,f122 from tb3 where f121='Test 3.5.7.5/6';
update tb3 set f122='Update 3.5.7.6' where f121= 'Test 3.5.7.5/6';
Select f121,f122 from tb3 where f121='Test 3.5.7.5/6';
#Cleanup
--disable_warnings
drop trigger trg5_1;
--error 0, ER_TRG_DOES_NOT_EXIST
drop trigger trg5_2;
delete from tb3 where f121='Test 3.5.7.5/6';
--enable_warnings
#Section 3.5.7.7 / 3.5.7.8
# Test case: Ensure that it is not possible to create multiple AFTER INSERT triggers
# on the same table, even if the triggers have different names / different
# triggered actions.
let $message= Testcase 3.5.7.7 / 3.5.7.8:;
--source include/show_msg.inc
set @test_var='Before trig 3.5.7.7';
Create trigger trg6_1 AFTER INSERT
on tb3 for each row set @test_var='Trigger1 3.5.7.7/8';
--error ER_NOT_SUPPORTED_YET
Create trigger trg6_2 AFTER INSERT
on tb3 for each row set @test_var='Trigger2 3.5.7.7';
select @test_var;
Insert into tb3 (f121,f122) values ('Test 3.5.7.7/8','Insert 3.5.7.7');
Select f121,f122 from tb3 where f121='Test 3.5.7.7/8';
select @test_var;
update tb3 set f122='Update 3.5.7.8' where f121= 'Test 3.5.7.7/8';
Select f121,f122 from tb3 where f121='Test 3.5.7.7/8';
select @test_var;
#Cleanup
--disable_warnings
drop trigger trg6_1;
--error 0, ER_TRG_DOES_NOT_EXIST
drop trigger trg6_2;
delete from tb3 where f121='Test 3.5.7.7/8';
--enable_warnings
#Section 3.5.7.9 / 3.5.7.10
# Test case: Ensure that it is not possible to create multiple BEFORE UPDATE triggers
# on the same table, even if the triggers have different names / different
# triggered actions.
let $message= Testcase 3.5.7.9/10:;
--source include/show_msg.inc
Create trigger trg7_1 BEFORE UPDATE
on tb3 for each row set new.f122='Trigger1 3.5.7.9/10';
--error ER_NOT_SUPPORTED_YET
Create trigger trg7_2 BEFORE UPDATE
on tb3 for each row set new.f122='Trigger2 3.5.7.9';
Insert into tb3 (f121,f122) values ('Test 3.5.7.9/10','Insert 3.5.7.9');
Select f121,f122 from tb3 where f121='Test 3.5.7.9/10';
update tb3 set f122='update 3.5.7.10' where f121='Test 3.5.7.9/10';
Select f121,f122 from tb3 where f121='Test 3.5.7.9/10';
#Cleanup
--disable_warnings
drop trigger trg7_1;
--error 0, ER_TRG_DOES_NOT_EXIST
drop trigger trg7_2;
delete from tb3 where f121='Test 3.5.7.9/10';
#Section 3.5.7.11 / 3.5.7.12
# Test case: Ensure that it is not possible to create multiple AFTER UPDATE triggers
# on the same table, even if the triggers have different names / different
# triggered actions.
let $message= Testcase 3.5.7.11/12:;
--source include/show_msg.inc
set @test_var='Before trig 3.5.7.11';
Create trigger trg8_1 AFTER UPDATE
on tb3 for each row set @test_var='Trigger 3.5.7.11/12';
--error ER_NOT_SUPPORTED_YET
Create trigger trg8_2 AFTER UPDATE
on tb3 for each row set @test_var='Trigger2 3.5.7.11';
select @test_var;
Insert into tb3 (f121,f122) values ('Test 3.5.7.11/12','Insert 3.5.7.11/12');
select @test_var;
Select f121,f122 from tb3 where f121='Test 3.5.7.11/12';
update tb3 set f122='update 3.5.7.12' where f121='Test 3.5.7.11/12';
Select f121,f122 from tb3 where f121='Test 3.5.7.11/12';
select @test_var;
delete from tb3 where f121='Test 3.5.7.11/12';
#Cleanup
--disable_warnings
drop trigger trg8_1;
--error 0, ER_TRG_DOES_NOT_EXIST
drop trigger trg8_2;
delete from tb3 where f121='Test 3.5.7.11/12';
#Section 3.5.7.13 / 3.5.7.14
# Test case: Ensure that it is not possible to create multiple BEFORE DELETE triggers
# on the same table, even if the triggers have different names / different
# triggered actions.
let $message= Testcase 3.5.7.13/14:;
--source include/show_msg.inc
set @test_var=1;
Create trigger trg9_1 BEFORE DELETE
on tb3 for each row set @test_var=@test_var+1;
--error ER_NOT_SUPPORTED_YET
Create trigger trg9_2 BEFORE DELETE
on tb3 for each row set @test_var=@test_var+10;
select @test_var;
Insert into tb3 (f121,f122) values ('Test 3.5.7.13/14','Insert 3.5.7.13');
Select f121,f122 from tb3 where f121='Test 3.5.7.13/14';
select @test_var;
delete from tb3 where f121='Test 3.5.7.13/14';
Select f121,f122 from tb3 where f121='Test 3.5.7.13/14';
select @test_var;
delete from tb3 where f121='Test 3.5.7.13/14';
select @test_var;
#Cleanup
--disable_warnings
drop trigger trg9_1;
--error 0, ER_TRG_DOES_NOT_EXIST
drop trigger trg9_2;
delete from tb3 where f121='Test 3.5.7.13/14';
#Section 3.5.7.15 / 3.5.7.16
# Test case: Ensure that it is not possible to create multiple AFTER DELETE triggers
# on the same table, even if the triggers have different names / different
# triggered actions.
let $message= Testcase 3.5.7.15/16:;
--source include/show_msg.inc
set @test_var=1;
Create trigger trg_3_406010_1 AFTER DELETE
on tb3 for each row set @test_var=@test_var+5;
--error ER_NOT_SUPPORTED_YET
Create trigger trg_3_406010_2 AFTER DELETE
on tb3 for each row set @test_var=@test_var+50;
--error ER_TRG_ALREADY_EXISTS
Create trigger trg_3_406010_1 AFTER INSERT
on tb3 for each row set @test_var=@test_var+1;
select @test_var;
Insert into tb3 (f121,f122) values ('Test 3.5.7.15/16','Insert 3.5.7.15/16');
Select f121,f122 from tb3 where f121='Test 3.5.7.15/16';
select @test_var;
delete from tb3 where f121='Test 3.5.7.15/16';
Select f121,f122 from tb3 where f121='Test 3.5.7.15/16';
select @test_var;
delete from tb3 where f121='Test 3.5.7.15/16';
select @test_var;
#Cleanup
--disable_warnings
drop trigger trg_3_406010_1;
--error 0, ER_TRG_DOES_NOT_EXIST
drop trigger trg_3_406010_2;
delete from tb3 where f121='Test 3.5.7.15/16';
--enable_warnings
#Section 3.5.7.17
# Test case: Ensure that it is possible to have a BEFORE INSERT, an AFTER INSERT,
# a BEFORE UPDATE, an AFTER UPDATE, a BEFORE DELETE, and an AFTER DELETE
# trigger on the same table; that is, ensure that every persistent base
# table may be the subject table for exactly six triggers
let $message= Testcase 3.5.7.17 (see Testcase 3.5.1.1);
--source include/show_msg.inc
# Cleanup section 3.5
connection default;
drop user test_general@localhost;
drop user test_general;
drop user test_super@localhost;
DROP TABLE test.tb3;
Mini Shell