Mini Shell

Direktori : /usr/share/mysql-test/suite/binlog/t/
Current File : //usr/share/mysql-test/suite/binlog/t/binlog_error_action.test
###############################################################################
# Bug#11758766:MYSQLD CONTINUES OPERATION WITHOUT LOGGING WHEN BINLOGS
# CANNOT BE WRITTEN
#
# Problem:
# ========
# If an error occurs that prevents mysqld writing to the binary logs (disk
# full, readonly filesystem, etc) then the logs are disabled and operations
# continue. This can lead to out of sync slaves and improper backups.
#
# Test:
# =====
# A new option "binlog_error_action" has been introduced whose values
# are "IGNORE" or "ABORT". When binlogging becomes impossible if user sets
# the variable to "ABORT" server will stop if user sets it to "IGNORE" binlog
# will be turned off and server will continue. 4 different test cases are
# added to check both the behaviours.
###############################################################################
--source include/have_log_bin.inc
--source include/not_embedded.inc
--source include/have_binlog_format_statement.inc
# Don't test this under valgrind, memory leaks will occur
--source include/not_valgrind.inc
--source include/have_debug.inc
--source include/have_debug_sync.inc
# Avoid CrashReporter popup on Mac
--source include/not_crashrep.inc

call mtr.add_suppression("MYSQL_BIN_LOG::add_log_to_index failed to copy index file to crash safe index file.");
call mtr.add_suppression("Disk is full writing *");
call mtr.add_suppression("Retry in 60 secs. *");
call mtr.add_suppression("Error writing file*");
call mtr.add_suppression("Could not open .*");
call mtr.add_suppression("Could not use .*");
call mtr.add_suppression("Can't generate a unique log-filename master-bin");
call mtr.add_suppression("The server was unable to create a new log file *");
call mtr.add_suppression("An error occurred during flush stage of the commit");
call mtr.add_suppression("An error occurred during sync stage of the commit");
call mtr.add_suppression("Either disk is full or file system is read only");
call mtr.add_suppression("Attempting backtrace. You can use the following information to find out");
let $old=`select @@debug`;

RESET MASTER;

--echo Test case1
# Make binlog index readonly and check the behaviour with ABORT
let $MYSQLD_DATADIR= `select @@datadir`;
let $INDEX=$MYSQLD_DATADIR/master-bin.index;
--chmod 0444 $INDEX

SET GLOBAL binlog_error_action= ABORT_SERVER;
--exec echo "wait" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--error ER_BINLOG_LOGGING_IMPOSSIBLE
flush logs;
--chmod 0666 $INDEX
--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--enable_reconnect
--source include/wait_until_connected_again.inc

--echo Test case2
# Make MYSQL_BIN_LOG::open_binlog fail with debug simulation and test
# the behaviour in case of ABORT
SET SESSION debug="+d,fault_injection_updating_index";
SET GLOBAL binlog_error_action= ABORT_SERVER;
--exec echo "wait" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--error ER_BINLOG_LOGGING_IMPOSSIBLE
flush logs;
--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--enable_reconnect
--source include/wait_until_connected_again.inc

--echo Test case3
# Simulate diskfull during opening of binlog and check for diskfull error
# behaviour where binlogging impossible error is to abort the server.
SET SESSION debug="+d,simulate_disk_full_on_open_binlog";
SET GLOBAL binlog_error_action= ABORT_SERVER;
--exec echo "wait" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--error ER_BINLOG_LOGGING_IMPOSSIBLE
flush logs;
--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--enable_reconnect
--source include/wait_until_connected_again.inc

--echo Test case4
SET SESSION debug="+d,fault_injection_init_name";
SET GLOBAL binlog_error_action= ABORT_SERVER;
--exec echo "wait" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--error ER_BINLOG_LOGGING_IMPOSSIBLE
flush logs;
--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--enable_reconnect
--source include/wait_until_connected_again.inc

--echo Test case5
# Make binlog index readonly and check the behaviour with IGNORE
--chmod 0444 $INDEX
--replace_regex /\.[\\\/]master/master/ /errno: 13 - .*\)/errno: 13 - Permission denied)/
--error 29
flush logs;
CREATE TABLE t1 ( f int );
SHOW TABLES;
DROP TABLE t1;
--chmod 0666 $INDEX
--source include/restart_mysqld.inc

--echo Test case6
# Make MYSQL_BIN_LOG::open_binlog fail with debug simulation and test
# the behaviour in case of IGNORE
SET SESSION debug="+d,fault_injection_updating_index";
--replace_regex /\.[\\\/]master/master/ /errno: 1 - .*\)/errno: 1 - Operation not permitted)/
--error ER_CANT_OPEN_FILE
flush logs;
CREATE TABLE t2 (f int );
SHOW TABLES;
DROP TABLE t2;
SET SESSION debug="-d,fault_injection_updating_index";
--source include/restart_mysqld.inc

--echo Test case7
# Simulate diskfull during opening of binlog and check for diskfull error
# behaviour where binlogging impossible error is to continue the server
# after the error.
SET SESSION debug="+d,simulate_disk_full_on_open_binlog";
--replace_regex /\.[\\\/]master/master/ /Errcode: 28 - .*\)/Errcode: 28 - No space left on device)/
# error EE_WRITE with error code number 3 is expected.
--error 3
flush logs;
SET SESSION debug="-d,simulate_disk_full_on_open_binlog";
--source include/restart_mysqld.inc

--echo Test case8
SET SESSION debug="+d,fault_injection_init_name";
--replace_regex /\.[\\\/]master/master/ /errno: 1 - .*\)/errno: 1 - Operation not permitted)/
--error ER_CANT_OPEN_FILE
flush logs;
CREATE TABLE t2 (f int );
SHOW TABLES;
DROP TABLE t2;
SET SESSION debug="-d,fault_injection_init_name";
--source include/restart_mysqld.inc

###############################################################################
# Bug#20805298: BINLOG_ERROR_ACTION DOESN'T HANDLE SOME
# FAILURES DURING BINLOG ROTATION
#
# Problem:
# ========
# Hardware errors in binlog partition during binlog rotate are not handled by
# binlog_error_action.
#
# Test:
# =====
# Simulate failure during creation of new binary log file name. Set
# binlog_error_action to "IGNORE_ERROR" and observe that the binary log gets
# disabled and the server continues by logging an appropriate error message in
# error log file. Set binlog_error_action to "ABORT_ERROR" and observe that
# the
# server aborts when creation of new binarylog file name fails.
###############################################################################
--echo Test case09
# Test error scenario with binlog_error_action=IGNORE_ERROR
CREATE TABLE t1 (a INT) ENGINE=InnoDB;
SET SESSION debug='+d,error_unique_log_filename';
--error ER_NO_UNIQUE_LOGFILE
FLUSH LOGS;
DROP TABLE t1;
eval SET SESSION debug="$debug_save";
# Test to prove that binary log is disabled
--error ER_NO_BINARY_LOGGING
SHOW BINARY LOGS;
--source include/restart_mysqld.inc

--echo Test case10
# Test error scenario with binlog_error_action=ABORT_SERVER

CREATE TABLE t1 (a INT) ENGINE=InnoDB;
SET GLOBAL binlog_error_action=ABORT_SERVER;
SET SESSION debug='+d,error_unique_log_filename';
--exec echo "wait" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--error ER_BINLOG_LOGGING_IMPOSSIBLE
FLUSH LOGS;
--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--enable_reconnect
--source include/wait_until_connected_again.inc
DROP TABLE t1;

###############################################################################
# BUG#16666407BINLOG WRITE ERRORS SILENTLY IGNORED
# BUG#20938915 2PC SUCCEEDS EVEN THOUGH BINLOG FLUSH/SYNC FAILS
###############################################################################

############################
--echo Test case11
############################

# Simulate error during flushing cache to file and test the behaviour
# when binlog_error_action is set to ABORT_SERVER/IGNORE_ERROR.

# Case 11.1 (binlog_error_action = ABORT_SERVER)
--source include/shutdown_mysqld.inc
--remove_file $MYSQLTEST_VARDIR/tmp/binlog_error_action.err
--source include/start_mysqld.inc
RESET MASTER;

CREATE TABLE t1(i INT);
--let $log_pos_before = query_get_value("SHOW BINARY LOGS", File_size, 1)
SET SESSION debug = "+d,simulate_error_during_flush_cache_to_file";
SET GLOBAL binlog_error_action = ABORT_SERVER;
--exec echo "wait" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect

# Check that flush error causing server to abort and client gets
# ER_BINLOG_LOGGING_IMPOSSIBLE when binlog_error_action= 'ABORT_SERVER'.
--error ER_BINLOG_LOGGING_IMPOSSIBLE
INSERT INTO t1 VALUES (1);
--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--enable_reconnect
--source include/wait_until_connected_again.inc

# Check that error present in error log
--let SEARCH_FILE = $MYSQLTEST_VARDIR/tmp/binlog_error_action.err
--let SEARCH_PATTERN = An error occurred during flush stage of the commit. 'binlog_error_action' is set to 'ABORT_SERVER'.
--source include/search_pattern_in_file.inc

# Check that transaction is not committed
--let $assert_cond= COUNT(*) = 0 FROM t1;
--let $assert_text= Count of elements in t1 should be 0.
--source include/assert.inc

# Check that transaction is not binlogged as well
--let $log_pos_after = query_get_value("SHOW BINARY LOGS", File_size, 1)
--let $assert_cond = $log_pos_before = $log_pos_after
--let $assert_text = Query is not binlogged as expected.
--source include/assert.inc

# Case 11.2 (binlog_error_action = IGNORE_ERROR)
RESET MASTER;
--let $log_pos_before = query_get_value("SHOW BINARY LOGS", File_size, 1)
SET SESSION debug ="+d,simulate_error_during_flush_cache_to_file";
SET GLOBAL binlog_error_action= IGNORE_ERROR;
INSERT INTO t1 VALUES (2);

# Check that transaction is committed
--let $assert_cond = COUNT(*) = 1 FROM t1;
--let $assert_text = Count of elements in t1 should be 1.
--source include/assert.inc

# Restart so that binary log is enabled again and we can do the below test
--source include/restart_mysqld.inc

# Check that transaction is not binlogged
--let $log_pos_after = query_get_value("SHOW BINARY LOGS", File_size, 1)
--let $assert_cond = $log_pos_before = $log_pos_after
--let $assert_text = Query is not binlogged as expected.
--source include/assert.inc

# Check that error present in error log
--let SEARCH_FILE = $MYSQLTEST_VARDIR/tmp/binlog_error_action.err
--let SEARCH_PATTERN = An error occurred during flush stage of the commit. 'binlog_error_action' is set to 'IGNORE_ERROR'.
--source include/search_pattern_in_file.inc

# Cleanup
DROP TABLE t1;
RESET MASTER;

############################
--echo Test case12
############################

# Simulate error during syncing binlog file and test the behaviour
# when binlog_error_action is set to ABORT_SERVER/IGNORE_ERROR.
# Set sync_binlog=1 just to make sure that logic enters into sync phase.

# Case 12.1 (binlog_error_action = ABORT_SERVER)
SET GLOBAL sync_binlog = 1;
CREATE TABLE t1(i INT);
SET SESSION debug = "+d,simulate_error_during_sync_binlog_file";
SET GLOBAL binlog_error_action = ABORT_SERVER;
--exec echo "wait" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect

# Check that sync error causing server to abort and client gets
# ER_BINLOG_LOGGING_IMPOSSIBLE when binlog_error_action= 'ABORT_SERVER'.
--error ER_BINLOG_LOGGING_IMPOSSIBLE
INSERT INTO t1 VALUES (1);

--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--enable_reconnect
--source include/wait_until_connected_again.inc

# Cleanup
DELETE FROM t1;
RESET MASTER;

# Case 12.2 (binlog_error_action = IGNORE_ERROR)
SET SESSION debug = "+d,simulate_error_during_sync_binlog_file";
SET GLOBAL binlog_error_action = IGNORE_ERROR;
INSERT INTO t1 VALUES (2);

# Check that transaction is committed
--let $assert_cond = COUNT(*) = 1 FROM t1;
--let $assert_text = Count of elements in t1 should be 1.
--source include/assert.inc

# Cleanup
DROP table t1;
SET SESSION debug = "-d,simulate_error_during_sync_binlog_file";
--source include/restart_mysqld.inc
RESET MASTER;

############################
--echo Test case13
############################

# Simulate error during flushing events to binlog cache and test the behaviour
# when binlog_error_action is set to ABORT_SERVER/IGNORE_ERROR.

# Case 13.1 (binlog_error_action = ABORT_SERVER)
CREATE TABLE t1(i INT);
--let $log_pos_before = query_get_value("SHOW BINARY LOGS", File_size, 1)
SET SESSION debug = "+d,simulate_do_write_cache_failure";
SET GLOBAL binlog_error_action = ABORT_SERVER;
--exec echo "wait" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect

# Check that write cache error is causing server to abort and client gets
# ER_BINLOG_LOGGING_IMPOSSIBLE when binlog_error_action= 'ABORT_SERVER'.
--error ER_BINLOG_LOGGING_IMPOSSIBLE
INSERT INTO t1 VALUES (1);
--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--enable_reconnect
--source include/wait_until_connected_again.inc

# Check that transaction is not committed
--let $assert_cond = COUNT(*) = 0 FROM t1;
--let $assert_text = Count of elements in t1 should be 0.
--source include/assert.inc

# Check that transaction is not binlogged as well
--let $log_pos_after = query_get_value("SHOW BINARY LOGS", File_size, 1)
--let $assert_cond = $log_pos_before = $log_pos_after
--let $assert_text = Query is not binlogged as expected.
--source include/assert.inc

# Cleanup
RESET MASTER;

# Case 13.2 (binlog_error_action = IGNORE_ERROR)
SET SESSION debug = "+d,simulate_do_write_cache_failure";
SET GLOBAL binlog_error_action = IGNORE_ERROR;
INSERT INTO t1 VALUES (2);

# Check that transaction is committed (binlog check cannot be done
# as we would have written STOP_EVENT in the binlog while closing
# it)
--let $assert_cond = COUNT(*) = 1 FROM t1;
--let $assert_text = Count of elements in t1 should be 1.
--source include/assert.inc

# Cleanup
DROP table t1;
--source include/restart_mysqld.inc
RESET MASTER;

############################
--echo Test case14
############################

# Simulating a situation when a transaction is about to
# enter ordered_commit and another transaction closed
# binary log due to an error.

SET GLOBAL binlog_error_action = IGNORE_ERROR;
SET GLOBAL sync_binlog = 1;
CREATE TABLE t1(i INT);
CREATE TABLE t2(i INT);
connect(con1,localhost,root,,);
connect(con2,localhost,root,,);

--connection con1
SET DEBUG_SYNC = "waiting_to_enter_flush_stage SIGNAL about_to_enter_flush_stage WAIT_FOR binlog_closed";
--send INSERT INTO t1 values (1);

--connection default
SET DEBUG_SYNC = "now wait_for about_to_enter_flush_stage";

--connection con2
SET DEBUG_SYNC = "after_binlog_closed_due_to_error SIGNAL binlog_closed";
SET SESSION debug = "+d,simulate_error_during_sync_binlog_file";
--send INSERT INTO t2 values (2);

--connection con1
--reap
--connection con2
--reap

# Cleanup
--disconnect con1
--disconnect con2

--connection default
DROP table t1, t2;
--source include/restart_mysqld.inc

############################
--echo Test case15
############################

# Simulating a situation when a transaction is about to
# close binary log due to a sync error (about to acquire lock_log)
# and another transaction in the middle of flush stage (holding
# lock_log.

SET GLOBAL binlog_error_action = IGNORE_ERROR;
SET GLOBAL sync_binlog = 1;
CREATE TABLE t1(i INT);
CREATE TABLE t2(i INT);
connect(con1,localhost,root,,);
connect(con2,localhost,root,,);

--connection con1
SET DEBUG_SYNC = "before_binlog_closed_due_to_error SIGNAL binlog_about_to_be_closed WAIT_FOR in_the_middle_of_flush_stage";
SET SESSION debug = "+d,simulate_error_during_sync_binlog_file";
--send INSERT INTO t1 values (1);

--connection default
SET DEBUG_SYNC = "now wait_for binlog_about_to_be_closed";

--connection con2
SET DEBUG_SYNC = "waiting_in_the_middle_of_flush_stage SIGNAL in_the_middle_of_flush_stage";
--send INSERT INTO t2 values (2);

--connection con1
--reap
--connection con2
--reap

# Claenup
--disconnect con1
--disconnect con2

--connection default
DROP table t1, t2;
--source include/shutdown_mysqld.inc
--remove_file $MYSQLTEST_VARDIR/tmp/binlog_error_action.err
--source include/start_mysqld.inc

############################
--echo Test case16
############################

# Simulating a situation where two binlog groups encounter
# errors (one flush error, one sync error) at the same time
# and both of them try to close the binary log.

SET GLOBAL binlog_error_action = IGNORE_ERROR;
SET GLOBAL sync_binlog = 1;
CREATE TABLE t1(i INT);
CREATE TABLE t2(i INT);
connect(con1,localhost,root,,);
connect(con2,localhost,root,,);

--connection con1
SET DEBUG_SYNC = "before_binlog_closed_due_to_error SIGNAL binlog_about_to_be_closed WAIT_FOR another_group_encountered_flush_error";
SET SESSION debug = "+d,simulate_error_during_sync_binlog_file";
--send INSERT INTO t1 values (1);

--connection default
SET DEBUG_SYNC = "now wait_for binlog_about_to_be_closed";

--connection con2
SET DEBUG_SYNC = "before_binlog_closed_due_to_error SIGNAL another_group_encountered_flush_error";
SET SESSION debug ="+d,simulate_error_during_flush_cache_to_file";
--send INSERT INTO t2 values (2);

--connection con1
--reap
--connection con2
--reap
--replace_regex /[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2} [0-9]+/--TIME--/ /flush|sync stage/flush_or_sync stage/
--let GREP_FILE=$MYSQLTEST_VARDIR/tmp/binlog_error_action.err
--let GREP_PATTERN=An error occurred during
--source extra/rpl_tests/grep_pattern.inc

# Claenup
--disconnect con1
--disconnect con2

--connection default
DROP table t1, t2;
--source include/restart_mysqld.inc
./BlackJoker Mini Shell 1.0