Current File : //usr/share/mysql-test/include/rpl_change_topology.inc
# ==== Purpose ====
#
# Changes replication topology. This file is normally sourced from
# include/rpl_init.inc, but test cases can also source it if they
# need to change topology after they have sourced include/rpl_init.inc
#
# This file sets up variables needed by include/rpl_sync.inc and many
# other replication scripts in the include/ directory. It also issues
# CHANGE MASTER on all servers where the configuration changes from
# what it was before. It does not issue START SLAVE (use
# include/rpl_start_slaves.inc for that).
#
# Note: it is not currently possible to change the number of servers
# after the rpl_init.inc, without first calling rpl_end.inc. So the
# test has to set $rpl_server_count to the total number of servers
# that the test uses, before it sources include/rpl_init.inc. After
# that, $rpl_server_count must not change until after next time the
# test sources include/rpl_end.inc.
#
# Note: Since this script issues CHANGE MASTER, the test case must
# ensure that all slaves where the configuration changes have stopped
# both the IO thread and the SQL thread before this script is sourced.
#
#
# ==== Usage ====
#
# [--let $rpl_server_count= 7]
# --let $rpl_topology= 1->2->3->1->4, 2->5, 6->7
# [--let $use_gtids= 1]
# [--let $rpl_skip_change_master= 1]
# [--let $rpl_master_log_file= 1:master-bin.000001,3:master-bin.000003]
# [--let $rpl_master_log_pos= 1:4711,3:107]
# [--let $rpl_debug= 1]
# [--let $rpl_unconditional_change_master= 1]
# --source include/rpl_change_topology.inc
#
# Parameters:
# $use_gtids
# Use option MASTER_AUTO_POSITION = 1 to CHANGE MASTER.
#
# $rpl_master_log_file
# By default, CHANGE MASTER is executed with MASTER_LOG_FILE set
# to the name of the last binlog file on the master (retrieved by
# executing SHOW MASTER STATUS). This variable can be set to
# specify another filename. This variable should be a
# comma-separated list of the following form:
#
# SERVER_NUMBER_1:FILE_NAME_1,SERVER_NUMBER_2:FILE_NAME_2,...
#
# Before CHANGE MASTER is executed on server N, this script checks
# if $rpl_master_log_file contains the text N:FILE_NAME. If it
# does, then MASTER_LOG_FILE is set to FILE_NAME. Otherwise,
# MASTER_LOG_FILE is set to the last binlog on the master. For
# example, to specify that server_1 should start replicate from
# master-bin.000007 and server_5 should start replicate from
# master-bin.012345, do:
# --let $rpl_master_log_file= 1:master-bin.000007,5:master-bin.012345
#
# $rpl_master_log_pos
# By default, CHANGE MASTER is executed without specifying the
# MASTER_LOG_POS parameter. This variable can be set to set a
# specific position. It has the same form as $rpl_master_log_file
# (see above). For example, to specify that server_3 should start
# replicate from position 4711 of its master, do:
# --let $rpl_master_log_pos= 3:4711
#
# $rpl_unconditional_change_master
# This script remembers the topology set by previous invokations
# of either rpl_init.inc or of this script. By default, this
# script only executes CHANGE MASTER on servers that actually have
# a new master. If $rpl_unconditiona_change_master is set, then
# this script unconditionally executes CHANGE MASTER on all
# servers that have a master. This is useful either if you have
# changed the topology without invoking the scripts or if you want
# to set some other parameters of CHANGE MASTER.
#
# $rpl_server_count, $rpl_topology, $rpl_debug, $rpl_skip_change_master
# See include/rpl_init.inc
#
#
# ==== Internal variables configured by this file ====
#
# This file sets up the following variables, which are used by other
# low-level replication files such as:
# include/rpl_sync.inc
# include/rpl_start_slaves.inc
# include/rpl_stop_slaves.inc
# include/rpl_end.inc
#
# $rpl_server_count_length:
# Set to LENGTH($rpl_server_count). So if $rpl_server_count < 10,
# then $rpl_server_count_length = 1; if 10 <= $rpl_server_count <
# 100, then $rpl_server_count_length = 2, etc.
#
# $rpl_master_list
# Set to a string consisting of $rpl_server_count numbers, each one
# whitespace-padded to $rpl_server_count_length characters. If
# server N is a slave, then the N'th number is the master of server
# N. If server N is not a slave, then the N'th number is just spaces
# (so in fact it is not a number). For example, if $rpl_topology is
# '1->2,2->3,3->1,2->4,5->6', then $rpl_master_list is '3122 6'.
#
# $rpl_sync_chain_dirty
# This variable is set to 1. This tells include/rpl_sync.inc to
# compute a new value for $rpl_sync_chain next time that
# include/rpl_sync.inc is sourced. See
# include/rpl_generate_sync_chain.inc and include/rpl_sync.inc for
# details.
# Remove whitespace from $rpl_topology
--let $rpl_topology= `SELECT REPLACE('$rpl_topology', ' ', '')`
--let $include_filename= rpl_change_topology.inc [new topology=$rpl_topology]
--source include/begin_include_file.inc
if ($rpl_debug)
{
--echo ---- Check input ----
}
if (`SELECT '$rpl_topology' = '' OR '$rpl_server_count' = ''`)
{
--die You must set $rpl_topology and $rpl_server_count before you source rpl_change_topology.inc. If you really want to change to the empty topology, set $rpl_topology= none
}
--let $_rpl_topology= $rpl_topology
if ($_rpl_topology == 'none')
{
--let $_rpl_topology=
}
if ($rpl_master_list == '')
{
--die You must source include/rpl_init.inc before you source include/rpl_change_topology.inc
}
--let $_rpl_old_master_list= $rpl_master_list
if ($rpl_debug)
{
--echo \$rpl_server_count='$rpl_server_count'
--echo \$rpl_server_count_length='$rpl_server_count_length'
--echo new \$rpl_topology='$_rpl_topology'
--echo old \$rpl_master_list='$rpl_master_list'
--echo old \$rpl_sync_chain='$rpl_sync_chain'
}
if ($rpl_debug)
{
--echo ---- Generate \$rpl_server_count_length and \$rpl_master_list ----
}
--let $rpl_server_count_length= `SELECT LENGTH('$rpl_server_count')`
--let $rpl_master_list=
--let $_rpl_no_server= `SELECT REPEAT(' ', $rpl_server_count_length)`
--let $rpl_master_list= `SELECT REPEAT('$_rpl_no_server', $rpl_server_count)`
while ($_rpl_topology)
{
# Get 's1->s2' from 's1->s2->s3->...' or from 's1->s2,s3->s4,...'
--let $_rpl_master_slave= `SELECT SUBSTRING_INDEX(SUBSTRING_INDEX('$_rpl_topology', ',', 1), '->', 2)`
# Modify $_rpl_topology as follows:
# - If it starts with 's1->s2,', remove 's1->s2,'
# - If it starts with 's1->s2->', remove 's1->'
# - If it is equal to 's1->s2', remove 's1->s2'
--let $_rpl_topology= `SELECT SUBSTR('$_rpl_topology', IF(SUBSTR('$_rpl_topology', LENGTH('$_rpl_master_slave') + 1, 2) != '->', LENGTH('$_rpl_master_slave'), LOCATE('->', '$_rpl_master_slave')) + 2)`
# Get 's1' from 's1->s2'
--let $_rpl_master= `SELECT SUBSTRING_INDEX('$_rpl_master_slave', '->', 1)`
# Get 's2' from 's1->s2'
--let $_rpl_slave= `SELECT SUBSTRING('$_rpl_master_slave', LENGTH('$_rpl_master') + 3)`
# Check that s2 does not have another master.
if (`SELECT SUBSTR('$rpl_master_list', 1 + ($_rpl_slave - 1) * $rpl_server_count_length, $rpl_server_count_length) != '$_rpl_no_server'`)
{
--echo ERROR IN TEST: Server '$_rpl_slave' has more than one master in topology '$rpl_topology'
--die ERROR IN TEST: found a server with more than one master in the $rpl_topology variable
}
# Save 's1' at position 's2' in $rpl_master_list
--let $rpl_master_list= `SELECT INSERT('$rpl_master_list', 1 + ($_rpl_slave - 1) * $rpl_server_count_length, $rpl_server_count_length, RPAD('$_rpl_master', $rpl_server_count_length, ' '))`
}
if ($rpl_debug)
{
--echo new \$rpl_server_count_length = '$rpl_server_count_length'
--echo new \$rpl_master_list = '$rpl_master_list'
}
if (!$rpl_skip_change_master)
{
if ($rpl_debug)
{
--echo ---- Execute CHANGE MASTER on all servers ----
}
if (!$rpl_debug)
{
--disable_query_log
}
--let $_rpl_server= $rpl_server_count
while ($_rpl_server)
{
if (!$rpl_unconditional_change_master)
{
# The following statement evaluates to:
# - The master server, if we need to execute CHANGE MASTER on
# server_$_rpl_server.
# - The empty string otherwise; i.e., if server_$_rpl_server is
# not a slave or if server_$_rpl_server has the same master
# as before.
let $_rpl_master=
`SELECT TRIM(IFNULL(NULLIF(
SUBSTRING('$rpl_master_list',
1 + ($_rpl_server - 1) * $rpl_server_count_length,
$rpl_server_count_length),
SUBSTRING('$_rpl_old_master_list',
1 + ($_rpl_server - 1) * $rpl_server_count_length,
$rpl_server_count_length)
), ''))`;
}
if ($rpl_unconditional_change_master)
{
# The following statement evaluates to the master server, or to
# the empty string if the server_$_rpl_server is not a slave.
let $_rpl_master= `SELECT TRIM(
SUBSTRING('$rpl_master_list',
1 + ($_rpl_server - 1) * $rpl_server_count_length,
$rpl_server_count_length)
)`;
}
if ($rpl_debug)
{
--echo \$_rpl_server='$_rpl_server' \$_rpl_master='$_rpl_master'
}
if (!$use_gtids)
{
--let $rpl_connection_name= server_$_rpl_server
--source include/rpl_connection.inc
--let $_master_auto_position= query_get_value(SHOW SLAVE STATUS, Auto_Position, 1)
if ($_master_auto_position == 1)
{
CHANGE MASTER TO MASTER_AUTO_POSITION= 0;
}
}
if ($_rpl_master != '')
{
# Get port number
--let $_rpl_port= \$SERVER_MYPORT_$_rpl_master
if ($use_gtids)
{
--let $_rpl_change_master_position= MASTER_AUTO_POSITION = 1
--let $rpl_connection_name= server_$_rpl_server
--source include/rpl_connection.inc
}
if (!$use_gtids)
{
# Get MASTER_LOG_FILE
--let $_rpl_master_log_file_index= `SELECT LOCATE('$_rpl_server:', '$rpl_master_log_file')`
if ($_rpl_master_log_file_index)
{
# Get text from after ':' and before ',', starting at
# $_rpl_master_log_file
--let $_rpl_master_log_file= `SELECT SUBSTRING_INDEX(SUBSTRING_INDEX(SUBSTRING('$rpl_master_log_file', $_rpl_master_log_file_index), ',', 1), ':', -1)`
}
if (!$_rpl_master_log_file_index)
{
--let $rpl_connection_name= server_$_rpl_master
--source include/rpl_connection.inc
--let $_rpl_master_log_file= query_get_value(SHOW MASTER STATUS, File, 1)
}
--let $_rpl_change_master_position= MASTER_LOG_FILE = '$_rpl_master_log_file'
# Change connection.
--let $rpl_connection_name= server_$_rpl_server
--source include/rpl_connection.inc
# Get MASTER_LOG_POS
--let $_rpl_master_log_pos_index= `SELECT LOCATE('$_rpl_server:', '$rpl_master_log_pos')`
if ($_rpl_master_log_pos_index)
{
--let $_rpl_master_log_pos= `SELECT SUBSTRING_INDEX(SUBSTRING_INDEX(SUBSTRING('$rpl_master_log_pos', $_rpl_master_log_pos_index), ',', 1), ':', -1)`
--let $_rpl_change_master_position= $_rpl_change_master_position, MASTER_LOG_POS = $_rpl_master_log_pos
}
}
--replace_regex /[0-9]{4}/####/
eval CHANGE MASTER TO MASTER_HOST = '127.0.0.1', MASTER_PORT = $_rpl_port, MASTER_USER = 'root', $_rpl_change_master_position, MASTER_CONNECT_RETRY = 1;
}
if ($_rpl_master == '')
{
# This un-configures the server so that it's not a slave.
# After BUG#28796, such configuration is not possible any more.
#--let $rpl_connection_name= server_$_rpl_server
#--source include/rpl_connection.inc
#CHANGE MASTER TO MASTER_HOST = '';
}
--dec $_rpl_server
}
}
--let $rpl_sync_chain_dirty= 1
--let $include_filename= rpl_change_topology.inc
--source include/end_include_file.inc
Mini Shell