Mini Shell

Direktori : /usr/share/doc/perl-Net-SSLeay-1.55/

Current File : //usr/share/doc/perl-Net-SSLeay-1.55/README

README - Net::SSLeay Perl module for using OpenSSL
$Id: README 370 2013-03-22 00:28:13Z mikem-guest $

By popular demand...
--------------------

perl -MNet::SSLeay -e '($p)=Net::SSLeay::get_https("www.openssl.org", 443, "/"); print $p'

Prerequisites
-------------

perl-5.6.1
though anything starting from perl5.003 probably works.
OpenSSL-0.9.6j or OpenSSL-0.9.7b
(try http://www.openssl.org/) -
This release has been tested with 0.9.6d and
in historical light it seems likely that future versions
will work as well (if major version number changes all bets
are off, though)

Note: SSLeay is no longer supported. If you want to use Net::SSLeay with
SSLeay or early versions of OpenSSL, use version 1.03. The support
for SSLeay was dropped due to nobody maintaining it (all active
work goes on with OpenSSL) and due to incompatible API changes
in OpenSSL-0.9.2b. OpenSSL-0.9.1c support has also been dropped,
version 1.03 was the last one to support that.

You should use the same C compiler and options to compile OpenSSL,
perl, and Net::SSLeay. This is the only supported configuration.
If you insist on using different compilers (perhaps because you
obtained either OpenSSL or perl as binaries from a vendor and they
used a compiler that you do not have) then all requests for support
will be ignored. If the only way for you to use the same compiler
for all three components is to recompile your openssl or perl, then
that is exactly what I expect you to do before asking for support.

Installing
----------

Unix:
# build OpenSSL as per instructions in that package

gunzip <Net-SSLeay.pm-1.35.tar.gz | tar xvf -
cd Net-SSLeay.pm-1.35
perl Makefile.PL # builds and tests it
make test # Run the test suite
make install # You probably have to su to root to do this

HPUX:
In principle the Unix build should work (Makefile.PL contains
special code to detect aCC), but historically there have been
some problems. Marko Asplund (aspa@@kronodoc._fi) reports
that he has successfully compiled on HP-UX. He used following
incantations

Configuring OpenSSL:

./Configure no-asm --prefix=/openssl/path hpux-parisc2-cc

Configuring Net::SSLeay:

OPENSSL_PREFIX=/openssl/path perl Makefile.PL CCFLAGS='-D_HPUX_SOURCE \
-Aa -I/usr/local/include +e'

The magic bit seemed to be the `+e' flag. Since version 1.14
Makefile.PL tries to figure this out.

He was using: gcc v2.95.2, OpenSSL v0.9.6c, Net::SSLeay-1.13

Windows:
Supported on 32 and 64 bit platforms
See README.Win32 for details

You should also be able to use CPAN.pm to install this module if you like.

Linking with RSAref is no longer supported (the patent issue is moot
due to patent expiring). If you want to try it, you are on your own,
but here's how it used to work...

For linking against RSAref the the OPENSSL_RSAREF environment variable like this:

OPENSSL_RSAREF=1 ./Makefile.PL -t # builds and tests it, link against RSAref

You must previously have built OpenSSL with RSAref support (which
implies first building rsaref itself), I use the RSAglue method. File
librsaref.a must be found in one of the locations searched by linker
(-L switches). Usually this means that you have to rename rsaref.a to
librsaref.a and copy it to suitable directory, e.g. /usr/local/ssl/lib.

N.B. AFAIK the patent that made using RSAref necessary has expired, so
this should be nonissue by now.

Problems (read this before sending mail)
----------------------------------------

Please, do not send bug report before you have

- compiled your OpenSSL yourself - don't copy binaries, please
- compiled your perl yourself and with substantially same CFLAGS
and same C compiler (say `which cc' or `which gcc') as your OpenSSL.
This is especially applicable to link errors and shared
library loading problems. Please do not even dream of
copying a perl binary or installing perl binary from a package.
Perl's idea of calling conventions has to match OpenSSL's and
unfortunately both are quite advanced pieces of code
(guru duel: Larry Wall vs. Eric Young :-) with dynamic loading
and who knows what
- compiled my module from source against correct perl (say `which perl'
and check your path). Generally my module's build process will
discover correct compiler and flags from `perl -V'
- tried gcc, if your vendor cc fails

If you post a question or make a bug report, please remember to mention

- Your platform and OS version (i386 Linux, Sparc Solaris, etc) (uname -a)
- On Linux, please report glibc version as well (ls -l /lib/libc*)
- Net::SSLeay version (see tar ball)
- OpenSSL version (`/usr/local/ssl/bin/openssl version')
- ANSI C compiler brand and version (e.g. gcc -v)

If build fails,
- three compiler warnings are known to be emitted (due to lack of const
in some places), one of them indicates a fatal bug in callback handling,
but as I have not yet sorted it out, you'll simply have to ignore it
- if you installed OpenSSL from some distribution, try getting a fresh
copy from www.openssl.org and recompiling and installing it yourself
- make sure you are not being confused by the fact that OpenSSL-0.9.3
changed the location of include files to /usr/local/ssl/include/openssl/*
Consider deleting all old bogus headers
- if using newer than supported OpenSSL, please downgrade to supported
version to see if it makes difference
- you must compile the module, perl, and openssl with the same C compiler
and the same options. Use perl -V to check what options were used and
recompile openssl and Net::SSLeay accordingly
- never report bugs related to binary installs. First compile _yourself_
perl, openssl and my module, always using the same compiler and
compiler flags. Many distros are known to "know better" and thus
cause problems for their users. I'm not very sympathetic to having
to answer end user questions thus created.
- send full output of `make clean; perl Makefile.PL -t'

If make test fails, please
- one warning is known to be emitted between tests 4 and 5 (callback)
- edit test.pl and set $trace=2
- send full output of `make clean; perl Makefile.PL -t'
- send contents of sslecho.log

If you have problems with a site, please
- what site, what server software (including version and platform)
- does it reproduce with s_client, try with something like

echo 'GET /' | /usr/local/ssl/bin/openssl s_client -connect www.bacus.pt:443

- does it reproduce with popular web browsers
- play with Net::SSLeay::ssl_version (see top of SSLeay.pm)
- does the site run exotic configuration, e.g. insisting on specific
protocol version, limiting available ciphers, using nonstandard
ciphers, weird authentication arrangements, etc.)
- contact the owner of the server to see what the problem looks like
in his end. He should be able to tell you the exact versions used
and the error messages he is seeing in his log
- if you ask me to check a site out, you are granting me permission
to access that site and will pay all legal expenses to defend me
in court as well as any remedies that may be granted to the site
in case the site decides to sue me. You warrant that you are
authorized to give me permission to access the site.
- if you ask me to check a site, please send me a working URL and
include any authentication credentials if needed. If your site
is so confidential that you can not give me an URL, then do
not ask me to debug your problems.

HP-UX is known to give some problems, please mail me or the mailing
list so we can get these problems straightened. Hint: it has to do
with dynamic loading. One user reports that adding `-lgcc' to EXTRALIBS
and LD_LOAD_LIBS in Makefile fixes the problem. I have not received any
confirmation whether this fix really works, but its worth a try. Another
bag of problems is people installing against binary distributed
perl and compiling the package with different cc or different options.
Genereally this will never work. Please compile _yourself_ your perl,
openssl, and the module, always with the same compiler and compiler flags.

Solaris 8 does not come standard with /dev/random or /dev/urandom, and the
'make test' assumes that some source of randomness is available. 'make test'
will fail on Solaris 8 if /dev/urandom is not available. The error message
seen with trace enabled will be "SSL_GET_NEW_SESSION:ssl session id callback
failed". In order to fix this, you must install Sun patch 112438-03 from
http://sunsolve.sun.com

#: unzip 112438-03.zip
#: patchadd ./112438-03
You will probably need to reboot your system:
#: reboot

I have a report (schinder@@pobox._com) of make test segfaulting on
Linux-PPC. This still needs to be investigated. No recent information
has been received.

It seems perl5.004 (at least some versions) has bad xsub compiler which
can make builds sometimes fail. Try upgrading to perl-5.6.1 first.

"Random number generator not seeded!!!" This warning indicates that
randomize() was not able to read /dev/random or /dev/urandom, possibly
because your system does not have them or they are differently
named. You can still use SSL, but the encryption will not be as
strong.

Did you read the POD documentation (if you don't know what that
is, just say `perldoc Net::SSLeay' or `more SSLeay.pm')?

Are you sure you didn't confuse `Net::SSLeay' with `SSLeay' that
comes with OpenSSL?

My development environments used to be

i686, Linux-2.4.3, gcc-2.92.2, glibc-2.2, perl-5.6.0, openssl-0.9.6a
i686, Linux-2.4.3, gcc-2.92.2, glibc-2.2, perl5.005_02, openssl-0.9.6a
i686, Linux-2.0.35, gcc-2.7.2.3, glibc-2.0.6, perl5.005_02, openssl-0.9.5a
i586, Linux-2.4.3, gcc-2.92.2.1, glibc-2.2.2, perl-5.6.0, openssl-0.9.6a
i586, Linux-2.4.3, gcc-2.92.2.1, glibc-2.2.2, perl5.005_03, openssl-0.9.6
i586, Linux-2.4.3, gcc-2.92.2.1, glibc-2.2.2, perl5.005_03, openssl-0.9.6a
Sun-U1, SunOS-5.6, gcc-2.92.2, libc2 perl-5.6.1, openssl-0.9.6c

Unfortunately I do not have access to other systems so you are
somewhat on your own. Everything compiles without a warning (except
those mentioned above) on my systems.

Check that perl is finding your OpenSSL.

If `make test' bombs, add following line to the test script that fails:

$Net::SSLeay::trace = 2;

and see what happens. You may also have to edit test.pl to make sure
the debugging output gets printed.

If `make test' prints lots of `connect: Connection refused...' errors,
then sslecho.pl test server has died. It is supposed to be launched in
the beginning of test.pl, but can fail if, e.g. port 1212 is taken or
in TIMEWAIT state. Look also in ssleacho.log file for diagnostics.

If you are really low on memory and the 1 MB tests fail, edit value of
$mb variable in test.pl.

If you get core dump, build your perl for debugging (add -g to
ccflags, see INSTALL in perl distribution), build your SSLeay for
debugging as well, add -g flag to Makefile.PL:

make clean
perl Makefile.PL -g
make static
make test_static
gdb perl core # post mortem
> bt # show stack trace
gdb perl # run live with debugging
# set break point in SSLeay.xs or in suspect function of OpenSSL
> br XS_Net__SSLeay_connect
> run yourscript.pl arg arg

For gdb'ing make sure gdb finds all the relevant source code. This
may mean that you must run perl and OpenSSL from the directories where
the respective makefiles build them.

You can also enable PR and PRN macros in SSLeay.xs and sprinkle
even some more around the code to figure out what's happening.

Some exotic configurations of perl may cause unstability: make sure
OpenSSL uses the same malloc as perl. Recompile perl without
threads. Try not using the PerlIO abstraction.

If you need to tweak build for some platform, please let me know
so I can fix it. Patches and gdb session dumps are also welcome.

License and Copying
-------------------

Distribution and use of this module is under the same terms as the
OpenSSL package itself (i.e. free, but mandatory attribution; NO
WARRANTY). Please consult LICENSE file in the root of the OpenSSL
distribution.

While the source distribution of this perl module does not contain
Eric's or OpenSSL's code, if you use this module you will use OpenSSL
library. Please give Eric and OpenSSL team credit (as required by
their licenses).

And remember, you, and nobody else but you, are responsible for
auditing this module and OpenSSL library for security problems,
backdoors, and general suitability for your application.