GIF89a;
Direktori : /lib/modules/3.10.0-957.21.3.el7.centos.plus.x86_64/source/include/xen/interface/ |
Current File : //lib/modules/3.10.0-957.21.3.el7.centos.plus.x86_64/source/include/xen/interface/memory.h |
/****************************************************************************** * memory.h * * Memory reservation and information. * * Copyright (c) 2005, Keir Fraser <keir@xensource.com> */ #ifndef __XEN_PUBLIC_MEMORY_H__ #define __XEN_PUBLIC_MEMORY_H__ #include <linux/spinlock.h> /* * Increase or decrease the specified domain's memory reservation. Returns a * -ve errcode on failure, or the # extents successfully allocated or freed. * arg == addr of struct xen_memory_reservation. */ #define XENMEM_increase_reservation 0 #define XENMEM_decrease_reservation 1 #define XENMEM_populate_physmap 6 struct xen_memory_reservation { /* * XENMEM_increase_reservation: * OUT: MFN (*not* GMFN) bases of extents that were allocated * XENMEM_decrease_reservation: * IN: GMFN bases of extents to free * XENMEM_populate_physmap: * IN: GPFN bases of extents to populate with memory * OUT: GMFN bases of extents that were allocated * (NB. This command also updates the mach_to_phys translation table) */ GUEST_HANDLE(xen_pfn_t) extent_start; /* Number of extents, and size/alignment of each (2^extent_order pages). */ xen_ulong_t nr_extents; unsigned int extent_order; /* * Maximum # bits addressable by the user of the allocated region (e.g., * I/O devices often have a 32-bit limitation even in 64-bit systems). If * zero then the user has no addressing restriction. * This field is not used by XENMEM_decrease_reservation. */ unsigned int address_bits; /* * Domain whose reservation is being changed. * Unprivileged domains can specify only DOMID_SELF. */ domid_t domid; }; DEFINE_GUEST_HANDLE_STRUCT(xen_memory_reservation); /* * An atomic exchange of memory pages. If return code is zero then * @out.extent_list provides GMFNs of the newly-allocated memory. * Returns zero on complete success, otherwise a negative error code. * On complete success then always @nr_exchanged == @in.nr_extents. * On partial success @nr_exchanged indicates how much work was done. */ #define XENMEM_exchange 11 struct xen_memory_exchange { /* * [IN] Details of memory extents to be exchanged (GMFN bases). * Note that @in.address_bits is ignored and unused. */ struct xen_memory_reservation in; /* * [IN/OUT] Details of new memory extents. * We require that: * 1. @in.domid == @out.domid * 2. @in.nr_extents << @in.extent_order == * @out.nr_extents << @out.extent_order * 3. @in.extent_start and @out.extent_start lists must not overlap * 4. @out.extent_start lists GPFN bases to be populated * 5. @out.extent_start is overwritten with allocated GMFN bases */ struct xen_memory_reservation out; /* * [OUT] Number of input extents that were successfully exchanged: * 1. The first @nr_exchanged input extents were successfully * deallocated. * 2. The corresponding first entries in the output extent list correctly * indicate the GMFNs that were successfully exchanged. * 3. All other input and output extents are untouched. * 4. If not all input exents are exchanged then the return code of this * command will be non-zero. * 5. THIS FIELD MUST BE INITIALISED TO ZERO BY THE CALLER! */ xen_ulong_t nr_exchanged; }; DEFINE_GUEST_HANDLE_STRUCT(xen_memory_exchange); /* * Returns the maximum machine frame number of mapped RAM in this system. * This command always succeeds (it never returns an error code). * arg == NULL. */ #define XENMEM_maximum_ram_page 2 /* * Returns the current or maximum memory reservation, in pages, of the * specified domain (may be DOMID_SELF). Returns -ve errcode on failure. * arg == addr of domid_t. */ #define XENMEM_current_reservation 3 #define XENMEM_maximum_reservation 4 /* * Returns a list of MFN bases of 2MB extents comprising the machine_to_phys * mapping table. Architectures which do not have a m2p table do not implement * this command. * arg == addr of xen_machphys_mfn_list_t. */ #define XENMEM_machphys_mfn_list 5 struct xen_machphys_mfn_list { /* * Size of the 'extent_start' array. Fewer entries will be filled if the * machphys table is smaller than max_extents * 2MB. */ unsigned int max_extents; /* * Pointer to buffer to fill with list of extent starts. If there are * any large discontiguities in the machine address space, 2MB gaps in * the machphys table will be represented by an MFN base of zero. */ GUEST_HANDLE(xen_pfn_t) extent_start; /* * Number of extents written to the above array. This will be smaller * than 'max_extents' if the machphys table is smaller than max_e * 2MB. */ unsigned int nr_extents; }; DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list); /* * Returns the location in virtual address space of the machine_to_phys * mapping table. Architectures which do not have a m2p table, or which do not * map it by default into guest address space, do not implement this command. * arg == addr of xen_machphys_mapping_t. */ #define XENMEM_machphys_mapping 12 struct xen_machphys_mapping { xen_ulong_t v_start, v_end; /* Start and end virtual addresses. */ xen_ulong_t max_mfn; /* Maximum MFN that can be looked up. */ }; DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mapping_t); #define XENMAPSPACE_shared_info 0 /* shared info page */ #define XENMAPSPACE_grant_table 1 /* grant table page */ #define XENMAPSPACE_gmfn 2 /* GMFN */ #define XENMAPSPACE_gmfn_range 3 /* GMFN range, XENMEM_add_to_physmap only. */ #define XENMAPSPACE_gmfn_foreign 4 /* GMFN from another dom, * XENMEM_add_to_physmap_range only. */ /* * Sets the GPFN at which a particular page appears in the specified guest's * pseudophysical address space. * arg == addr of xen_add_to_physmap_t. */ #define XENMEM_add_to_physmap 7 struct xen_add_to_physmap { /* Which domain to change the mapping for. */ domid_t domid; /* Number of pages to go through for gmfn_range */ uint16_t size; /* Source mapping space. */ unsigned int space; /* Index into source mapping space. */ xen_ulong_t idx; /* GPFN where the source mapping page should appear. */ xen_pfn_t gpfn; }; DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap); /*** REMOVED ***/ /*#define XENMEM_translate_gpfn_list 8*/ #define XENMEM_add_to_physmap_range 23 struct xen_add_to_physmap_range { /* IN */ /* Which domain to change the mapping for. */ domid_t domid; uint16_t space; /* => enum phys_map_space */ /* Number of pages to go through */ uint16_t size; domid_t foreign_domid; /* IFF gmfn_foreign */ /* Indexes into space being mapped. */ GUEST_HANDLE(xen_ulong_t) idxs; /* GPFN in domid where the source mapping page should appear. */ GUEST_HANDLE(xen_pfn_t) gpfns; /* OUT */ /* Per index error code. */ GUEST_HANDLE(int) errs; }; DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap_range); /* * Returns the pseudo-physical memory map as it was when the domain * was started (specified by XENMEM_set_memory_map). * arg == addr of struct xen_memory_map. */ #define XENMEM_memory_map 9 struct xen_memory_map { /* * On call the number of entries which can be stored in buffer. On * return the number of entries which have been stored in * buffer. */ unsigned int nr_entries; /* * Entries in the buffer are in the same format as returned by the * BIOS INT 0x15 EAX=0xE820 call. */ GUEST_HANDLE(void) buffer; }; DEFINE_GUEST_HANDLE_STRUCT(xen_memory_map); /* * Returns the real physical memory map. Passes the same structure as * XENMEM_memory_map. * arg == addr of struct xen_memory_map. */ #define XENMEM_machine_memory_map 10 /* * Prevent the balloon driver from changing the memory reservation * during a driver critical region. */ extern spinlock_t xen_reservation_lock; /* * Unmaps the page appearing at a particular GPFN from the specified guest's * pseudophysical address space. * arg == addr of xen_remove_from_physmap_t. */ #define XENMEM_remove_from_physmap 15 struct xen_remove_from_physmap { /* Which domain to change the mapping for. */ domid_t domid; /* GPFN of the current mapping of the page. */ xen_pfn_t gpfn; }; DEFINE_GUEST_HANDLE_STRUCT(xen_remove_from_physmap); #endif /* __XEN_PUBLIC_MEMORY_H__ */