Current File : //lib/modules/3.10.0-1160.88.1.el7.centos.plus.x86_64/source/arch/arm/mach-shmobile/Kconfig
if ARCH_SHMOBILE
comment "SH-Mobile System Type"
config ARCH_SH7372
bool "SH-Mobile AP4 (SH7372)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_CPU_SUSPEND if PM || CPU_IDLE
select CPU_V7
select SH_CLK_CPG
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select I2C
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
config ARCH_R8A7778
bool "R-Car M1 (R8A77780)"
select CPU_V7
select SH_CLK_CPG
select ARM_GIC
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select SH_CLK_CPG
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
select RENESAS_INTC_IRQPIN
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
config ARCH_EMEV2
bool "Emma Mobile EV2"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
comment "SH-Mobile Board Type"
config MACH_AP4EVB
bool "AP4EVB board"
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SH_LCD_MIPI_DSI
select SND_SOC_AK4642 if SND_SIMPLE_CARD
choice
prompt "AP4EVB LCD panel selection"
default AP4EVB_QHD
depends on MACH_AP4EVB
config AP4EVB_QHD
bool "MIPI-DSI QHD (960x540)"
config AP4EVB_WVGA
bool "Parallel WVGA (800x480)"
endchoice
config MACH_AG5EVM
bool "AG5EVM board"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SH_LCD_MIPI_DSI
config MACH_APE6EVM
bool "APE6EVM board"
depends on ARCH_R8A73A4
select USE_OF
config MACH_MACKEREL
bool "mackerel board"
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
config MACH_KOTA2
bool "KOTA2 board"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_BONITO
bool "bonito board"
depends on ARCH_R8A7740
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_ARMADILLO800EVA
bool "Armadillo-800 EVA board"
depends on ARCH_R8A7740
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_WM8978 if SND_SIMPLE_CARD
select USE_OF
config MACH_BOCKW
bool "BOCK-W platform"
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
select RENESAS_INTC_IRQPIN
select USE_OF
config MACH_MARZEN
bool "MARZEN board"
depends on ARCH_R8A7779
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_MARZEN_REFERENCE
bool "MARZEN board - Reference Device Tree Implementation"
depends on ARCH_R8A7779
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
---help---
Use reference implementation of Marzen board support
which makes use of device tree at the expense
of not supporting a number of devices.
This is intended to aid developers
config MACH_LAGER
bool "Lager board"
depends on ARCH_R8A7790
select USE_OF
config MACH_KZM9D
bool "KZM9D board"
depends on ARCH_EMEV2
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
config MACH_KZM9G_REFERENCE
bool "KZM-A9-GT board - Reference Device Tree Implementation"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
---help---
Use reference implementation of KZM-A9-GT board support
which makes as greater use of device tree at the expense
of not supporting a number of devices.
This is intended to aid developers
comment "SH-Mobile System Configuration"
config CPU_HAS_INTEVT
bool
default y
menu "Memory configuration"
config MEMORY_START
hex "Physical memory start address"
default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
MACH_MACKEREL || MACH_BONITO || \
MACH_ARMADILLO800EVA || MACH_APE6EVM || \
MACH_LAGER
default "0x41000000" if MACH_KOTA2
default "0x00000000"
---help---
Tweak this only when porting to a new machine which does not
already have a defconfig. Changing it from the known correct
value on any of the known systems will only lead to disaster.
config MEMORY_SIZE
hex "Physical memory size"
default "0x80000000" if MACH_LAGER
default "0x40000000" if MACH_APE6EVM
default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
MACH_ARMADILLO800EVA
default "0x1e000000" if MACH_KOTA2
default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
default "0x04000000"
help
This sets the default memory size assumed by your kernel. It can
be overridden as normal by the 'mem=' argument on the kernel command
line.
endmenu
menu "Timer and clock configuration"
config SHMOBILE_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024
default "128"
help
Allows the configuration of the timer frequency. It is customary
to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
case of low timer frequencies other values may be more suitable.
SH-Mobile systems using a 32768 Hz RCLK for clock events may want
to select a HZ value such as 128 that can evenly divide RCLK.
A HZ value that does not divide evenly may cause timer drift.
config SH_TIMER_CMT
bool "CMT timer driver"
default y
help
This enables build of the CMT timer driver.
config SH_TIMER_TMU
bool "TMU timer driver"
default y
help
This enables build of the TMU timer driver.
config EM_TIMER_STI
bool "STI timer driver"
default y
help
This enables build of the STI timer driver.
endmenu
config SH_CLK_CPG
bool
source "drivers/sh/Kconfig"
endif
Mini Shell