#!/usr/bin/perl
# -*- cperl -*-
#
# Copyright (c) 2007, 2017, Oracle and/or its affiliates. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License, version 2.0,
# as published by the Free Software Foundation.
#
# This program is also distributed with certain software (including
# but not limited to OpenSSL) that is licensed under separate terms,
# as designated in a particular file or component or in included license
# documentation. The authors of MySQL hereby grant you an additional
# permission to link the program and your derivative works with the
# separately licensed software that they have included with MySQL.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License, version 2.0, for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##############################################################################
#
# This scripts creates the MySQL Server system tables.
#
# This script try to match the shell script version as close as possible,
# but in addition being compatible with ActiveState Perl on Windows.
#
# All unrecognized arguments to this script are passed to mysqld.
#
# NOTE: This script in 5.0 doesn't really match the shell script
# version 100%, it is more close to the 5.1 version.
#
# NOTE: This script was deliberately written to be as close to the shell
# script as possible, to make the maintenance of both in parallel
# easier.
#
##############################################################################
use strict;
use warnings;
#############################################################################
#
# Check if all needed modules are available, exit if something is missing.
#############################################################################
#
BEGIN {
my @req_mods = ('Fcntl', 'File::Basename', 'File::Copy', 'Getopt::Long',
'Sys::Hostname', 'Data::Dumper');
my @missing_mods;
my $req;
foreach $req (@req_mods) {
eval 'require ' . $req;
if ($@) {
push(@missing_mods, $req);
} else {
$req->import();
}
}
# this avoids the confusing "BEGIN failed--compilation aborted" message
local $SIG{__DIE__} = sub {warn @_; exit 1};
if (@missing_mods) {
my $msg = "FATAL ERROR: please install the following Perl modules " .
"before executing $0:\n" . join("\n",@missing_mods)."\n";
die $msg;
}
}
Getopt::Long::Configure("pass_through");
my @args; # Argument list filled in
my $basedir;
##############################################################################
#
# Usage information
#
##############################################################################
sub usage
{
print <<EOF1;
Usage: $0 [OPTIONS]
--basedir=path The path to the MySQL installation directory.
--builddir=path If using --srcdir with out-of-directory builds, you
will need to set this to the location of the build
directory where built files reside.
--cross-bootstrap For internal use. Used when building the MySQL system
tables on a different host than the target.
--datadir=path The path to the MySQL data directory.
If missing, the directory will be created, but its
parent directory must already exist and be writable.
--defaults-extra-file=name
Read this file after the global files are read.
--defaults-file=name Only read default options from the given file name.
--force Causes mysql_install_db to run even if DNS does not
work. In that case, grant table entries that
normally use hostnames will use IP addresses.
--help Display this help and exit.
--ldata=path The path to the MySQL data directory. Same as --datadir.
--no-defaults Don't read default options from any option file.
--keep-my-cnf Don't try to create my.cnf based on template.
Useful for systems with working, updated my.cnf.
Deprecated, will be removed in future version.
EOF1
if ( $^O !~ m/^(MSWin32|cygwin)$/ ) {
print <<EOF2;
--random-passwords Create and set a random password for all root accounts
and set the "password expired" flag,
also remove the anonymous accounts.
EOF2
}
print <<EOF3;
--rpm For internal use. This option is used by RPM files
during the MySQL installation process.
--skip-name-resolve Use IP addresses rather than hostnames when creating
grant table entries. This option can be useful if
your DNS does not work.
--srcdir=path The path to the MySQL source directory. This option
uses the compiled binaries and support files within the
source tree, useful for if you don't want to install
MySQL yet and just want to create the system tables.
EOF3
if ( $^O !~ m/^(MSWin32|cygwin)$/ ) {
print <<EOF4;
--user=user_name The login username to use for running mysqld. Files
and directories created by mysqld will be owned by this
user. You must be root to use this option. By default
mysqld runs using your current login name and files and
directories that it creates will be owned by you.
EOF4
}
print <<EOF5;
Any other options are passed to the mysqld program.
EOF5
exit 1;
}
##############################################################################
#
# Parse an argument list
#
# We only need to pass arguments through to the server if we don't
# handle them here. So, we collect unrecognized options (passed on
# the command line) into the args variable.
#
##############################################################################
sub parse_arguments
{
my $opt = shift;
my @saved_ARGV = @ARGV;
@ARGV = @_; # Set ARGV so GetOptions works
my $pick_args;
if (@ARGV and $ARGV[0] eq 'PICK-ARGS-FROM-ARGV')
{
$pick_args = 1;
shift @ARGV;
}
GetOptions(
$opt,
"force",
"basedir=s",
"builddir=s", # FIXME not documented
"srcdir=s",
"ldata|datadir=s",
# Note that the user will be passed to mysqld so that it runs
# as 'user' (crucial e.g. if log-bin=/some_other_path/
# where a chown of datadir won't help)
"user=s",
"skip-name-resolve",
"verbose",
"keep-my-cnf",
"rpm",
"help",
"random-passwords",
# These options will also be pased to mysqld.
"defaults-file=s",
"defaults-extra-file=s",
"no-defaults",
# Used when building the MySQL system tables on a different host than
# the target. The platform-independent files that are created in
# --datadir on the host can be copied to the target system.
#
# The most common use for this feature is in the Windows installer
# which will take the files from datadir and include them as part of
# the install package. See top-level 'dist-hook' make target.
#
# --windows is a deprecated alias
"cross-bootstrap|windows",
) or usage();
usage() if $opt->{help};
if ( $opt->{'no-defaults'} && ( $opt->{'defaults-extra-file'} ||
$opt->{'defaults-file'} ) )
{
error($opt,
"Cannot use both --no-defaults and --defaults-[extra-]file");
}
@args = @ARGV if $pick_args;
@ARGV = @saved_ARGV; # Set back ARGV
}
##############################################################################
#
# Try to find a specific file within --basedir which can either be a binary
# release or installed source directory and return the path.
#
##############################################################################
sub find_in_basedir
{
my $opt = shift;
my $mode = shift; # "dir" or "file"
my $files = shift;
foreach my $file ( @{ref($files) ? $files : [$files]} )
{
foreach my $dir ( @_ )
{
foreach my $part ( "$file","$file.exe","release/$file.exe",
"debug/$file.exe","relwithdebinfo/$file.exe" )
{
my $path = "$basedir/$dir/$part";
if ( -f $path )
{
return $mode eq "dir" ? dirname($path) : $path;
}
}
}
}
}
##############################################################################
#
# Just a function to write out an error report
#
##############################################################################
sub cannot_find_file
{
my $file = shift;
print "FATAL ERROR: Could not find $file\n";
print "\n";
print "If you compiled from source, you need to run 'make install' to\n";
print "copy the software into the correct location ready for operation.\n";
print "\n";
print "If you are using a binary release, you must either be at the top\n";
print "level of the extracted archive, or pass the --basedir option\n";
print "pointing to that location.\n";
print "\n";
exit 1;
}
##############################################################################
#
# Form a command line that can handle spaces in paths and arguments
#
##############################################################################
# FIXME this backslash escaping needed if using '"..."' ?
# This regexp makes sure that any special chars are quoted,
# so the arg gets passed exactly to the server.
# XXX: This is broken; true fix requires using eval and proper
# quoting of every single arg ($opt->{basedir}, $opt->{ldata}, etc.)
# join(" ", map {s/([^\w\_\.\-])/\\$1/g}
sub quote_options {
my @cmd;
foreach my $opt ( @_ )
{
next unless $opt; # If undefined or empty, just skip
push(@cmd, "\"$opt\""); # Quote argument
}
return join(" ", @cmd);
}
##############################################################################
#
# Simple escape mechanism (\-escape any ' and \), suitable for two contexts:
# - single-quoted SQL strings
# - single-quoted option values on the right hand side of = in my.cnf
#
##############################################################################
# (Function and comment copied from 'mysql_secure_installation')
# These two contexts don't handle escapes identically. SQL strings allow
# quoting any character (\C => C, for any C), but my.cnf parsing allows
# quoting only \, ' or ". For example, password='a\b' quotes a 3-character
# string in my.cnf, but a 2-character string in SQL.
#
# This simple escape works correctly in both places.
# FIXME: What about double quote in password? Not handled here - not needed?
sub basic_single_escape {
my ($str) = @_;
# Inside a character class, \ is not special; this escapes both \ and '
$str =~ s/([\'])/\\$1/g;
return $str;
}
##############################################################################
#
# Handle the files with confidential contents
#
##############################################################################
my $secret_file; # full path name of the confidential file
my $escaped_password; # the password, with special characters escaped
sub ensure_secret_file {
$secret_file = $ENV{HOME} . "/.mysql_secret";
# Create safe files to avoid leaking info to other users
# Loop may be extended if we need more ...
foreach my $file ( $secret_file ) {
next if -f $file; # Already exists
local *FILE;
sysopen(FILE, $file, O_CREAT, 0600)
or die "ERROR: can't create $file: $!";
close FILE;
}
}
##############################################################################
#
# Append an arbitrary number of lines to an existing file
#
##############################################################################
sub append_file {
my $file = shift;
-f $file or die "ERROR: file is missing \"$file\": $!";
open(FILE, ">>$file") or die "ERROR: can't append to file \"$file\": $!";
foreach my $line ( @_ ) {
print FILE $line, "\n"; # Add EOL char
}
close FILE;
}
##############################################################################
#
# Inform the user about the generated random password
#
##############################################################################
sub tell_root_password {
my $now = localtime(); # scalar context = printable string
# Now, we need to tell the user the new root password.
# We use "append_file" to protect the user in case they are doing multiple
# installations intermixed with backups and restores.
# While this would be really bad practice, it still might happen.
# As long as this file is not destroyed, the time stamps may rescue them.
# Having the comment and the password on the same line makes it easier
# to automatically extract the password (automated testing!), and the final
# empty line is for better redability.
append_file($secret_file,
"# The random password set for the root user at $now (local time): " .
$escaped_password,
"");
print "A random root password has been set. You will find it in '$secret_file'.\n";
}
##############################################################################
#
# Generate a random password
#
##############################################################################
sub generate_random_password {
# On Linux, Solaris, Max OS X and FreeBSD we have a random device available.
my $randfile = "/dev/urandom";
open(FD, $randfile) || return "";
my $password = "";
my $pass_len = 16;
my $c;
while (length($password) < $pass_len) {
$c = getc(FD);
if ($c =~ /\w/) {
$password .= $c;
}
}
close(FD);
return $password;
}
##############################################################################
#
# Ok, let's go. We first need to parse arguments which are required by
# my_print_defaults so that we can execute it first, then later re-parse
# the command line to add any extra bits that we need.
#
##############################################################################
my $opt = {};
parse_arguments($opt, 'PICK-ARGS-FROM-ARGV', @ARGV);
# ----------------------------------------------------------------------
# Actual basedir, not to be confused with --basedir option
# ----------------------------------------------------------------------
if ( $opt->{srcdir} ) {
$basedir= $opt->{builddir};
} else {
$basedir= $opt->{basedir};
}
$basedir= "/usr" if ! $basedir; # Default
# ----------------------------------------------------------------------
# We can now find my_print_defaults. This script supports:
#
# --srcdir=path pointing to compiled source tree
# --basedir=path pointing to installed binary location
#
# or default to compiled-in locations.
# ----------------------------------------------------------------------
my $print_defaults;
my $keep_my_cnf = 0;
if ( $opt->{srcdir} and $opt->{basedir} )
{
error($opt,"Specify either --basedir or --srcdir, not both");
}
if ( $opt->{'keep-my-cnf'} )
{
$keep_my_cnf = 1;
}
if ( $opt->{srcdir} )
{
$opt->{builddir} = $opt->{srcdir} unless $opt->{builddir};
$print_defaults = "$opt->{builddir}/extra/my_print_defaults";
}
else
{
$print_defaults = find_in_basedir($opt,"file","my_print_defaults","bin","extra");
}
if ( ! $print_defaults )
{
$print_defaults='/usr/bin/my_print_defaults';
}
-x $print_defaults or -f "$print_defaults.exe"
or cannot_find_file($print_defaults);
my $config_file;
my $copy_cfg_file;
# ----------------------------------------------------------------------
# This will be the default config file (unless creation is unwanted)
# ----------------------------------------------------------------------
my $cnfext = ( $^O =~ m/^(MSWin32|cygwin)$/ ) ? "ini" : "cnf";
$config_file= "$basedir/my.$cnfext";
my $cfg_template= find_in_basedir($opt,"file","my-default.$cnfext",
".", "share","share/mysql","support-files");
# Distros might move files
if ((! -r $cfg_template) && (-r "/usr/share/mysql/my-default.cnf")) {
$cfg_template = "/usr/share/mysql/my-default.cnf";
}
-e $cfg_template or cannot_find_file("my-default.$cnfext");
$copy_cfg_file= $config_file;
my $failed_write_cfg= 0;
if (-e $copy_cfg_file)
{
$copy_cfg_file =~ s/my.$cnfext/my-new.$cnfext/;
# Too early to print warning here, the user may not notice
}
if ( ! $keep_my_cnf ) {
open (TEMPL, $cfg_template) or error($opt, "Could not open config template $cfg_template");
if (open (CFG, "> $copy_cfg_file")) {
while (<TEMPL>) {
# Remove lines beginning with # *** which are template comments
print CFG $_ unless /^# \*\*\*/;
}
close CFG;
} else {
warning($opt,"Could not write to config file $copy_cfg_file: $!");
$failed_write_cfg= 1;
}
close TEMPL;
}
# ----------------------------------------------------------------------
# Now we can get arguments from the groups [mysqld] and [mysql_install_db]
# in the my.cfg file, then re-run to merge with command line arguments.
# ----------------------------------------------------------------------
my $cmd;
my @default_options;
if ( $opt->{'defaults-file'} )
{
$cmd = quote_options($print_defaults,
"--defaults-file=$opt->{'defaults-file'}",
"mysqld", "mysql_install_db");
}
else
{
$cmd = quote_options($print_defaults, "mysqld", "mysql_install_db");
}
open(PIPE, "$cmd |") or error($opt,"can't run $cmd: $!");
while ( <PIPE> )
{
chomp;
next unless /\S/;
push(@default_options, $_);
}
close PIPE;
$opt = {}; # Reset the arguments FIXME ?
parse_arguments($opt, @default_options);
parse_arguments($opt, 'PICK-ARGS-FROM-ARGV', @ARGV);
# ----------------------------------------------------------------------
# Create a random password for root, if requested and implemented
# ----------------------------------------------------------------------
if ( $opt->{'random-passwords'} ) {
# Add other non-working OS like this: $^O =~ m/^(solaris|linux|freebsd|darwin)$/
# and maintain "usage()".
# Issue 1: random password creation
# Issue 2: confidential file
if ( $^O =~ m/^(MSWin32|cygwin)$/ ) {
print "Random password not yet implemented for $^O - option will be ignored\n";
delete $opt->{'random-passwords'};
} else {
ensure_secret_file();
my $password = generate_random_password();
if ( $password ) {
# "true" means "string is non-empty"
$escaped_password = basic_single_escape($password);
} else {
# Whatever the reason (missing "/dev/urandom"), an empty password is bad
print "Could not generate a random password - not setting one\n";
delete $opt->{'random-passwords'};
}
}
}
# ----------------------------------------------------------------------
# Configure paths to support files
# ----------------------------------------------------------------------
# FIXME $extra_bindir is not used
my ($bindir,$extra_bindir,$mysqld,$pkgdatadir,$mysqld_opt,$scriptdir);
if ( $opt->{srcdir} )
{
$bindir = "$basedir/client";
$extra_bindir = "$basedir/extra";
$mysqld = "$basedir/sql/mysqld";
$mysqld_opt = "--language=$opt->{srcdir}/sql/share/english";
$pkgdatadir = "$opt->{srcdir}/scripts";
$scriptdir = "$opt->{srcdir}/scripts";
}
elsif ( $opt->{basedir} )
{
$bindir = "$opt->{basedir}/bin";
$extra_bindir = $bindir;
$mysqld = find_in_basedir($opt,"file",["mysqld-nt","mysqld"],
"libexec","sbin","bin") || # ,"sql"
find_in_basedir($opt,"file","mysqld-nt",
"bin"); # ,"sql"
$pkgdatadir = find_in_basedir($opt,"dir","fill_help_tables.sql",
"share","share/mysql"); # ,"scripts"
$scriptdir = "$opt->{basedir}/scripts";
}
else
{
$bindir = '/usr/bin';
$extra_bindir = $bindir;
$mysqld = '/usr/sbin/mysqld';
$pkgdatadir = '/usr/share/mysql';
$scriptdir = '/usr/bin';
}
unless ( $opt->{ldata} )
{
$opt->{ldata} = '/var/lib/mysql';
}
if ( $opt->{srcdir} )
{
$pkgdatadir = "$opt->{srcdir}/scripts";
}
# ----------------------------------------------------------------------
# Set up paths to SQL scripts required for bootstrap
# ----------------------------------------------------------------------
my $fill_help_tables = "$pkgdatadir/fill_help_tables.sql";
my $create_system_tables = "$pkgdatadir/mysql_system_tables.sql";
my $fill_system_tables = "$pkgdatadir/mysql_system_tables_data.sql";
my $security_commands = "$pkgdatadir/mysql_security_commands.sql";
foreach my $f ( $fill_help_tables, $create_system_tables, $fill_system_tables, $security_commands )
{
-f $f or cannot_find_file($f);
}
-x $mysqld or -f "$mysqld.exe" or cannot_find_file($mysqld);
# Try to determine the hostname
my $hostname = hostname();
# ----------------------------------------------------------------------
# Check if hostname is valid
# ----------------------------------------------------------------------
my $resolved;
if ( !$opt->{'cross-bootstrap'} and !$opt->{rpm} and !$opt->{force} )
{
my $resolveip = "$extra_bindir/resolveip";
$resolved = `$resolveip $hostname 2>&1`;
if ( $? != 0 )
{
$resolved=`$resolveip localhost 2>&1`;
if ( $? != 0 )
{
error($opt,
"Neither host '$hostname' nor 'localhost' could be looked up with",
"$resolveip",
"Please configure the 'hostname' command to return a correct",
"hostname.",
"If you want to solve this at a later stage, restart this script",
"with the --force option");
}
warning($opt,
"The host '$hostname' could not be looked up with $resolveip.",
"This probably means that your libc libraries are not 100 % compatible",
"with this binary MySQL version. The MySQL daemon, mysqld, should work",
"normally with the exception that host name resolving will not work.",
"This means that you should use IP addresses instead of hostnames",
"when specifying MySQL privileges !");
}
}
# FIXME what does this really mean....
if ( $opt->{'skip-name-resolve'} and $resolved and $resolved =~ /\s/ )
{
$hostname = (split(' ', $resolved))[5];
}
# ----------------------------------------------------------------------
# Create database directories mysql & test
# ----------------------------------------------------------------------
# FIXME The shell variant uses "mkdir -p":
# - because it is silent if the target exists, or
# - because it will cerate the path?
# Path creation is demanded by testers in bug# 14731457, but that might be risky
# in case of typos as this is run by root.
# For now, give an error message:
my $parent = dirname ( $opt->{ldata} );
if ( ! -d $parent ) {
error($opt,
"The parent directory for the data directory '$opt->{ldata}' does not exist.",
"If that path was really intended, please create that directory path and then",
"restart this script.",
"If some other path was intended, please use the correct path when restarting this script.");
}
my $opt_user= $opt->{user};
my @pwnam;
if ($opt_user)
{
if ( $^O =~ m/^(MSWin32|cygwin)$/ )
{
warning($opt, "The --user option is not supported on Windows, ignoring");
$opt_user= undef;
}
else
{
@pwnam= getpwnam($opt_user);
}
}
foreach my $dir ( $opt->{ldata}, "$opt->{ldata}/mysql", "$opt->{ldata}/test" )
{
mkdir($dir, 0700) unless -d $dir;
if ($opt_user and -w "/")
{
chown($pwnam[2], $pwnam[3], $dir)
or error($opt, "Could not chown directory $dir");
}
}
push(@args, "--user=$opt->{user}") if $opt->{user};
# ----------------------------------------------------------------------
# Configure mysqld command line
# ----------------------------------------------------------------------
# FIXME use --init-file instead of --bootstrap ?!
my $defaults_option = "";
if ( $opt->{'no-defaults'} )
{
$defaults_option= "--no-defaults";
}
elsif ( $opt->{'defaults-file'} )
{
$defaults_option= "--defaults-file=$opt->{'defaults-file'}";
}
my $defaults_extra= "--defaults-extra-file=$opt->{'defaults-extra-file'}"
if $opt->{'defaults-extra-file'};
my $mysqld_bootstrap = $ENV{MYSQLD_BOOTSTRAP} || $mysqld;
my $mysqld_install_cmd_line = quote_options($mysqld_bootstrap,
$defaults_option,
$defaults_extra,
$mysqld_opt,
"--bootstrap",
"--basedir=$basedir",
"--datadir=$opt->{ldata}",
"--log-warnings=0",
"--loose-skip-ndbcluster",
"--max_allowed_packet=8M",
"--default-storage-engine=MyISAM",
"--net_buffer_length=16K",
@args,
);
# ----------------------------------------------------------------------
# Create the system and help tables by passing them to "mysqld --bootstrap"
# ----------------------------------------------------------------------
report_verbose_wait($opt,"Installing MySQL system tables...");
open(SQL, $create_system_tables)
or error($opt,"can't open $create_system_tables for reading: $!");
open(SQL2, $fill_system_tables)
or error($opt,"can't open $fill_system_tables for reading: $!");
# FIXME > /dev/null ?
if ( open(PIPE, "| $mysqld_install_cmd_line") )
{
print PIPE "use mysql;\n";
while ( <SQL> )
{
# When doing a "cross bootstrap" install, no reference to the current
# host should be added to the system tables. So we filter out any
# lines which contain the current host name.
next if $opt->{'cross-bootstrap'} and /\@current_hostname/;
print PIPE $_;
}
while ( <SQL2> )
{
# When doing a "cross bootstrap" install, no reference to the current
# host should be added to the system tables. So we filter out any
# lines which contain the current host name.
next if $opt->{'cross-bootstrap'} and /\@current_hostname/;
print PIPE $_;
}
if ( $opt->{'random-passwords'} )
{
open(SQL3, $security_commands)
or error($opt,"can't open $security_commands for reading: $!");
while ( <SQL3> )
{
# using the implicit variable $_ !
s/ABC123xyz/$escaped_password/e ; # Replace placeholder by random password
print PIPE $_;
}
close SQL3;
tell_root_password();
}
close PIPE;
close SQL;
close SQL2;
report_verbose($opt,"OK");
# ----------------------------------------------------------------------
# Pipe fill_help_tables.sql to "mysqld --bootstrap"
# ----------------------------------------------------------------------
report_verbose_wait($opt,"Filling help tables...");
open(SQL, $fill_help_tables)
or error($opt,"can't open $fill_help_tables for reading: $!");
# FIXME > /dev/null ?
if ( open(PIPE, "| $mysqld_install_cmd_line") )
{
print PIPE "use mysql;\n";
while ( <SQL> )
{
print PIPE $_;
}
close PIPE;
close SQL;
report_verbose($opt,"OK");
}
else
{
warning($opt,"HELP FILES ARE NOT COMPLETELY INSTALLED!",
"The \"HELP\" command might not work properly");
}
report_verbose($opt,"To start mysqld at boot time you have to copy",
"support-files/mysql.server to the right place " .
"for your system");
if ( !$opt->{'cross-bootstrap'} )
{
# This is not a true installation on a running system. The end user must
# set a password after installing the data files on the real host system.
# At this point, there is no end user, so it does not make sense to print
# this reminder.
if ( $opt->{'random-passwords'} ) {
report($opt,
"A RANDOM PASSWORD HAS BEEN SET FOR THE MySQL root USER !",
"You will find that password in '$secret_file'.",
"",
"You must change that password on your first connect,",
"no other statement but 'SET PASSWORD' will be accepted.",
"See the manual for the semantics of the 'password expired' flag.",
"",
"Also, the account for the anonymous user has been removed.",
"",
"In addition, you can run:",
"",
" $bindir/mysql_secure_installation",
"",
"which will also give you the option of removing the test database.",
"This is strongly recommended for production servers.",
"",
"See the manual for more instructions.");
} else {
report($opt,
"PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !",
"To do so, start the server, then issue the following commands:",
"",
" $bindir/mysqladmin -u root password 'new-password'",
" $bindir/mysqladmin -u root -h $hostname password 'new-password'",
"",
"Alternatively you can run:",
"",
" $bindir/mysql_secure_installation",
"",
"which will also give you the option of removing the test",
"databases and anonymous user created by default. This is",
"strongly recommended for production servers.",
"",
"See the manual for more instructions.");
}
if ( !$opt->{rpm} )
{
report($opt,
"You can start the MySQL daemon with:",
"",
" cd " . '/usr' . " ; $bindir/mysqld_safe &",
"",
"You can test the MySQL daemon with mysql-test-run.pl",
"",
" cd mysql-test ; perl mysql-test-run.pl");
}
report($opt,
"Please report any problems at http://bugs.mysql.com/",
"",
"The latest information about MySQL is available on the web at",
"",
" http://www.mysql.com",
"",
"Support MySQL by buying support/licenses at http://shop.mysql.com");
if ($keep_my_cnf)
{
report($opt,
"Note: new default config file not created.",
"Please make sure your config file is current");
}
elsif ($copy_cfg_file eq $config_file and !$failed_write_cfg)
{
report($opt,
"New default config file was created as $config_file and",
"will be used by default by the server when you start it.",
"You may edit this file to change server settings");
}
elsif ($failed_write_cfg)
{
warning($opt,
"Could not copy config file template $cfg_template to",
"$copy_cfg_file, may not have access rights to do so.",
"You may want to copy the file manually, or create your own,",
"it will then be used by default by the server when you start it.");
}
else
{
warning($opt,
"Found existing config file $config_file on the system.",
"Because this file might be in use, it was not replaced,",
"but was used in bootstrap (unless you used --defaults-file)",
"and when you later start the server.",
"The new default config file was created as $copy_cfg_file,",
"please compare it with your file and take the changes you need.");
}
foreach my $cfg ( "/etc/my.$cnfext", "/etc/mysql/my.$cnfext" )
{
check_sys_cfg_file ($opt, $cfg);
}
}
exit 0
}
else
{
error($opt,
"Installation of system tables failed!",
"",
"Examine the logs in $opt->{ldata} for more information.",
"You can try to start the mysqld daemon with:",
"$mysqld --skip-grant-tables &",
"and use the command line tool",
"$bindir/mysql to connect to the mysql",
"database and look at the grant tables:",
"",
"shell> $bindir/mysql -u root mysql",
"mysql> show tables",
"",
"Try 'mysqld --help' if you have problems with paths. Using --log",
"gives you a log in $opt->{ldata} that may be helpful.",
"",
"The latest information about MySQL is available on the web at",
"http://www.mysql.com",
"Please consult the MySQL manual section: 'Problems running mysql_install_db',",
"and the manual section that describes problems on your OS.",
"Another information source is the MySQL email archive.",
"",
"Please check all of the above before submitting a bug report",
"at http://bugs.mysql.com/")
}
##############################################################################
#
# Misc
#
##############################################################################
sub check_sys_cfg_file
{
my $opt= shift;
my $fname= shift;
if ( -e $fname )
{
warning($opt,
"Default config file $fname exists on the system",
"This file will be read by default by the MySQL server",
"If you do not want to use this, either remove it, or use the",
"--defaults-file argument to mysqld_safe when starting the server");
}
}
sub report_verbose
{
my $opt = shift;
my $text = shift;
report_verbose_wait($opt, $text, @_);
print "\n\n";
}
sub report_verbose_wait
{
my $opt = shift;
my $text = shift;
if ( $opt->{verbose} or (!$opt->{rpm} and !$opt->{'cross-bootstrap'}) )
{
print "$text";
map {print "\n$_"} @_;
}
}
sub report
{
my $opt = shift;
my $text = shift;
print "$text\n";
map {print "$_\n"} @_;
print "\n";
}
sub error
{
my $opt = shift;
my $text = shift;
print "FATAL ERROR: $text\n";
map {print "$_\n"} @_;
exit 1;
}
sub warning
{
my $opt = shift;
my $text = shift;
print "WARNING: $text\n";
map {print "$_\n"} @_;
print "\n";
}
# Include dummy lines with patterns that generalized pkgadd script expects
my $_pkgadd_fodder= "
basedir=foo
datadir=bar
";
Mini Shell